Reviews Truck Oil Filter

WORKPRO Oil Filter Wrench/Pliers Set, 2-piece, 9" & 12", Adjustable Oil Filter Removal Tool, for Engine Filters, Cars, and Trucks

  • WHAT YOU GET- The adjustable oil filter wrench set includes 9-inch and 12-inch adjustable wrenches. This is particularly useful if you have several vehicles with filters of various dimensions. The set would be good for basic home use, such as auto motorcycles, truck repairing, installing oil filters and removal, and general assembly tasks.
  • HIGH-QUALITY MATERIAL- The materials of wrenches determine their durability. Our wrench head is made of high-quality forged carbon steel, heat-treated for durability. Drop-forged construction and corrosion-resistant black finish prolong the service life.
  • 5-POSITION SLIP JOINT DESIGN & ADJUSTABILITY- The 12" oil filter clamp has a maximum opening of 3-3/4" and a minimum opening of 2-1/2". The 9" plier can be fit for 1-3/4" to 3" oil filter. If your filter fits within these diameter dimensions it will work. In addition, the 5-position slip joint is designed to quickly adjust to size, and large teeth are set at a right angle to the jaw so they bite in either direction for a sure grip on slippery, oil-covered filters.
  • LONG REACH- The long enough handle provides extra reach and leverage in tight places. The bigger ones have longer handles and grips and can help you get to areas in which the oil filter is hard to reach.
Check Stock

10PCS Oil Filter Cap Wrench Tool Set Includes 24mm,27mm,29mm,30mm,32mm,36mm,38mm, 64mm Oil Filter Housing Removal Socket Kit for Toyota,BMW, Mercedes, VW

  • Juwerch Oil Filter Wrench 10-Piece Socket Set Tool Kit includes 1pcs 3/8" Dr.Ratchet Spanner, 24mm, 27mm, 29mm,30mm,32mm,36mm,38mm,64mm 4 and 6 gap oil filter socket sizes so you can work on a variety of cars and take out guesswork in oil filter replacement.
  • Fits vehicles with newer oil filter design.
  • Toyota 1.8L 2.5L 5.7L Engine,Mercedes, Cadillac, Buick, Saturn, SAAB, Dodge, Ford, Mini Cooper, and some BMW and Mack Truck with canister oil filter housing and plastic cap/lid that unscrews to reveal the paper cartridge element encased inside..
  • QUICK REMOVAL: Low profile short well 6-point(24mm, 27mm, 29mm, 30mm, 32mm, 36mm, 38mm),14-point（64.5mm 65mm) design with a 3/8-inch socket drive for a ratchet or extension.
  • Provides multiple contact points to engage the housing cap securely for maximum removal torque..
  • Heavy-duty 13” x 9.85” x 2.96” inch (33.1cm x 25.1cm x 7.52cm) plastic blow-molded carrying case for easy transportation, safe storage, and simple organi....
Check Stock

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

  • ...r tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
  • Part number(s) included (in factory packaging): 59076-3.
Check Stock

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

  • ...r tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
  • Part number(s) included (in factory packaging): 59076-3.
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

BISupply Vehicle Service Ramp Set – 6.3in Car Lift 2 Ton Heavy Duty Truck Ramps for Vehicle Maintenance, 2 Pack

  • ...ramps are designed for maximum strength and durability.
  • The textured surface provides superior traction to drive on while non-skid pads on the base help to keep the auto repair ramps from sliding across your garage floor.
  • Features raised tire stop and sides to keep tire in place and grid design to allow moisture to filter through.
  • Each package includes (2) 35.5 inch (90.2 cm) long vehicle lift ramps.
Check Stock

Driven Racing Oil 01707 XP7 10W-40 Semi-Synthetic Racing Motor Oil - 1 Quart, Case of 12

  • Handy 10 quart jugs, it save up to 5 per cent compared to single quart bottles.
  • XP7 provides excellent bearing oil film thickness and high temperature protection compared to conventional racing oils without the higher cost of a full synthetic.
  • XP7 delivers high zinc protection in a semi-synthetic formula.
  • Ideal for Off-Road truck engines, IMCA Modified, Dirt Late Models and 360 Sprints.
  • XP7 can run multiple races on alcohol or race gas before needing to be changed, the oil filter should be changed and top off the oil level after each race.
Check Stock

Channellock OF-1 2-Piece Oil Filer/PVC Plier Gift Set: 12-Inch and 15-Inch

  • Set Includes: 12" & 15.5" Oil Filter/ PVC plier.
  • Accommodates most car, truck and heavy equipment filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

OEM 25320 2-1/2-Inch to 4-5/8-Inch Oil Filter Pliers/Wrench

  • ADJUSTABLE OIL FILTER REMOVAL TOOL: These adjustable wrench pliers have the jaw capacity to fit spin-on filters from 2-1/2 inches to 4-5/8 inches.
  • Oil filter tool boasts a 20-degree jaw bend for more applications.
  • INTELLIGENTLY DESIGNED: Our filter wrench pliers feature a slip joint handle design that quickly adjusts to various sizes.
  • Oil filter wrench pliers accommodate the most common sizes among car and small engine filters.
  • SECURE GRIP: These engine oil filter wrench pliers come with machined jaw teeth that provide a sure grip without damaging filters.
  • Steel jaws on these oil filter wrenches make it quick and easy to remove even the toughest oil filters.
  • WORK IN TIGHT SPACES: Our automotive oil filter pliers include cushioned handles for safety and comfort.
  • Oil filter remover handles are nonslip, making it the best oil filter wrench pliers for working in tight spaces.
  • BUILT TO LAST: These heavy-duty oil filter adjustable wrench pliers are made of high-quality steel that is designed to last a lifetime.
  • Oil filter puller is designed with professional auto mechanics and heavy-duty applications in mind.
Check Stock

LS Oil Galley Diverter Restrictor Barbell Engine Block Plug Compatible with all GM Chevy 1997-2014 LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 4.8L 5.3L 5.7L 6.0L 6.2L Vortec

  • Replace your old worn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for you....
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock