Reviews Tripod Flash Bracket

ChromLives 1/4'' Dual Camera Mount Flash Bracket Extension Bar 10.6'' Straight Flash Bracket Tripod Mount Bracket for DSLR Camera LED Light Flash Light Microphone and More

  • Dual Camera Mount with 1/4" standard screw hole to mount on tripod..
  • The straight flash bracket is with dual 1/4" Screws to support two cameras,flash units or mics at the same time..
  • Dimensions: 10.6 x 1.2 x 0.2 inches (LXWXH), Max Loading Capacity: 6.6LB (3kg)..
  • Adjustable Range: From 3.7 to 9.3 inches.Long enough to hold two LED light at the same time. (Please check the max adjustable range for your camera or accessories before order)..
  • This Dual Camera Flash Mount Tripod Bracket is made of ALL Metal Aluminum, affixed with non-slip rubber pads to protect your camera flash and Mics from scratches and anti-slide..
Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

  • This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
  • It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
  • 2 pack of 1/4" tripod screw to flash shoe mount adapter.
Check Stock

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

  • This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
  • REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
  • UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
  • ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
  • SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..
Check Stock

Neewer Universal E-Type and S-Type Bracket Holder with Bowens Mount for Speedlite Flash Snoot Softbox Beauty Dish Reflector Umbrella Photo Studio

  • KIT INCLUDES: (1)S-Type Bracket Holder with Bowens Mount, (1)E-Type Bracket Holder, Suitable for Speedlite Flash Snoot Softbox Beauty Dish Reflector....
  • S-TYPE SPEEDLITE BRACKET: Great combination of L-type and T-type speedlite mounts and improved from them.
  • Smaller size, lighter weight, less space....
  • BOWEN MOUNT DESIGN AND FURTHER SUPPORT: Bowens mount design facilitates most studio flash accessories, such as softboxes, reflectors, beauty dishes....
  • E-TYPE SPEEDLITE BRACKET: The bracket has screw fittings for the flash mount, umbrella and tripod mount.
  • This bracket is an inexpensive way of....
  • PRACTICAL DESIGN: S-Type Bracket Holder Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, E-Type Bracket....
Check Stock

Vello CB-600 Straight Flash Bracket

  • 【2 Pack Dual Flash Bracket】 with 1/4 standard screw to mount on dslr camera, led light, flash light and more. Perfect for your different demand on shooting..
  • 【Adjustable Flash extension bar】 Adjustable range from 4-18cm. Allowing to attach two devices at the same time. Please check the max adjustable range for your camera or accessories before order..
  • 【1/4’’ and 3/8’’ Thread】 Dual camera mount for tripod comes with 1/4’’ and 3/8’’ thread holes at the center for tripod, light stand, handle grip, quick release plate and other support..
  • 【No-slip Rubber Pad】Dual hot shoe mount 1/4’’ screw with anti-slip rubber pad. Can protect your camera flash and led light from scratches and slipping..
  • 【High Quality】Made of aluminum material, very sturdy and durable. Dimensions: 20.3cm*2.8cm*0.5cm. Weight: 72g..
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

SLOW DOLPHIN Camera Flash Speedlite Mount Swivel Light Stand with Umbrella Bracket Holder （2 PCS）

  • It can be applied to various flash,and many more speedlites..
  • 180 Degree Swivel Joint- lamp holder in reflective umbrella or soft light umbrella socket, and can adjust the flash back office degrees, 180 degrees....
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread..
  • High Quality Aluminum Alloy- The camera umbrella holder is made of aluminum alloy,durable and solid..
  • NOTE: Flash,Tripod and soft umbrella are not included This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position....
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

SUPON Super Clamp + Mini Ball Head Bracket Mount + 1/4' to 1/4' Screw and 1/4' to 3/8' Screw for Rig,Monitor,DSLR,Backdrop,Flash,LED Light,Light Stand,Bike,Motorcycle,Rod,Tripod,Action Cameras

  • SUPON Super Clamp is can fix on to any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, bike, motorcycle, Rod, tripod, monopod, cross bars,etc. Combine with Ball Head Mount,it could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting..
  • Comes with a mini Ball head Mount, with 1/4 inch Screw Mount, uses to mount accessories onto a flash bracket.
  • 360-degree articulation,Ball head can be adjusted into most position, makes you a comfortable use. Perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider, Light Stand, Action Camera, etc..
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note: Received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread..
  • Metal construction with black anodized for higher durability..
  • Non-slip rubbers on the inner side provides strength and stability. Maximum opening diameter: 2.16". Ideal for clamping items 0.6"-1.73" in diameter..
Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

  • Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..
Check Stock

ChromLives Hot Shoe Extension Bar Mount, Cold Shoe Extension Flash Bracket, Dual Straight Mount Flash Bracket Compatible with Nikon Canon Sony Olympus DSLR Camera Camcorder DV

  • Universal Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 0~0.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,..
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length: 4.8”, Net Weight:63g/2.22oz..
Check Stock

UltraPro Rotating Flash Bracket Grip with Canon OC-E3 Replacement Off Camera TTL Flash Cord for Select Canon Flashes Bundle Included: Cleaning Kit, LCD Screen Protector, Mini Tripod

  • Compatible with the Canon 580EX, 430EX, 320EX, 270EX Flashes.
  • Flash Bracket with off-camera shoe sync cord extends to 3' feet. These heavy duty TTL cords are designed to fit your SLR camera with dedicated flash units.
  • A second shoe mounts onto a flash bracket or light stand via either a standard foot with lock or a 1/4-20 thread.
  • Multiple adjustment positions for your flash.
  • UltraPro Bundle Includes: Mini Tripod, Camera Cleaning & Camera LCD Screen Protector.
Check Stock