Reviews Triple Square Bit Autozone

Best Naturals L-Tryptophan 500mg 120 Capsules - tryptophan Supplements for Natural Way to get Good Night Sleep

  • TRIPLE SQUARE SPLINE SOCKET SET: Our triple square spline tool set is a must-have for tightening and loosening high-torque triple square screws and....
  • WORKS WITH MANY VEHICLES: These triple square drive sockets are designed to operate on European automotive vehicles.
  • CONVENIENT FEATURES: This socket set comes with high-strength chrome vanadium steel sockets to increase turning power.
  • HEAVY DUTY SOCKET TOOL SET: Our socket set features heat-treated alloy steel bits to reduce premature wear.
  • Triple square socket kit bits have a fully....
  • CONVENIENT STORAGE: The triple square spline drive socket set comes in an enclosed storage case for easy identification, portability, and storage.
Check Stock

OEMTOOLS 23906 10 Piece Magnetic Triple Square Bit Socket Set, Triple Square Socket Set for European Vehicles, Includes Sturdy Storage Case

  • If the Socket Fits: Powerful magnets in this triple square bit socket set prevent nuts, bolts, or fasteners from being dropped.
  • Never worry about losing hardware on the job again.
  • Easy to Reach: Triple square sockets measure 2” long for easy access in tight, awkward spaces.
  • Fit the right bit to your socket wrench for hassle-free repairs.
  • Endure the Elements: This drive socket set is made from S2 steel to reduce premature wear.
  • The chrome plated finish and zinc phosphate treatment also prevent rust and corrosion.
  • All in One: Square driver set includes 1/4", 3/8”, and 1/2" drive triple square bits ranging from M4-M18.
  • This 12 point square socket set will have you prepared for many projects.
  • Ready to Go: This 12 point triple square bit set includes a storage case for secure transport.
  • The XZN square bolt socket set features embossed bit sizes for easy identification.
Check Stock

BILITOOLS 8-Piece Impact XZN Triple Square Spline Bit Socket Set 1/2 inch Drive M5-M18 Cr-Mo Steel

  • This triple square bit socket set includes: M5 - M6 - M8 - M10 - M12 - M14 - M16 - M18, 1/2-inch Drive..
  • The xzn spline bit socket set is forged from Cr-Mo Alloy Steel for its strength under the pressures of impact use and wear resistances, and is suitable for use on all air powered & battery powered impact tools..
  • This triple square bit socket set with oiled, black oxide finish for maximum corrosion resistance..
  • Pin hole at the base of each socket for use with a locking pin for secure attachment to drive tools..
  • Size markings have been laser etched for quick and easy identification..
Check Stock

Capri Tools 10 mm M10 Stubby XZN Triple Square Bit Socket 3/8-Inch Drive 10mm M10 Stubby CP30356

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit....
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and....
  • 3/8 in. Drive M10 (10 mm) stubby XZN triple square bit.
Check Stock

Capri Tools 6 mm M6 Stubby XZN Triple Square Bit Socket, 1/4-Inch Drive (CP30353)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/4 in. Drive M6 (6 mm) stubby XZN triple square bit.
Check Stock

Capri Tools 14 mm MT14 Stubby XZN Triple Square Bit Socket, 1/2-Inch Drive (CP30358)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/2 in. Drive M14 (14 mm) stubby XZN triple square bit.
Check Stock

Genius Tools 4476T14 1/2' Dr. M14 Triple Square Impact Bit Socket

  • TRIPLE SQUARE IMPACT BIT SOCKET - M14 Size.
  • SPECIFICATIONS - 1/2 Inch Drive Size with an overall length of 76mm (or 2.99 Inches).
  • DURABLE MATERIALS - Made from Chrome Moly Steel for high strength and durability while having anti-corrosive properties.
  • TOOL ORGANIZATION - Sizes are stamped for permanent and easy identification of size.
  • RELIABLE AND EFFECTIVE - Our Triple Square Impact Bit Sockets are heat treated through oil quenching with a matte black oxide coating, which creates a durable exterior and superior inner core strength for a lifetime of professional use.
  • PEACE OF MIND - Purchase with confidence backed by the Genius Tools Limited Lifetime Warranty against manufacturer defects.
  • ANSI STANDARDS - Meets or exceeds the standards established by the American National Standards Institute.
  • PROFESSIONAL GRADE - Genius Tools are designed and made for use by professional technicians and built to perform over a lifetime of heavy use. Trust Genius for a quality tool at a value cost to you.
Check Stock

NEIKO 10056A 1/4-Inch 3/8-Inch & 1/2-Inch Drive XZN Triple Square Spline Bit Socket Set | 10 Piece Set | Cr-V Sockets and S2 Steel Bits

  • [VERSATILE]: This fastener bit set features 10 metric bits with the 3 largest sizes being tamperproof. Triple-square spline sockets are ideal for use with tamperproof lug nuts, cylinder head bolts, and other engine bolts..
  • [DESIGN]: This kit can convert standard square drives to triple square bits and is designed to eliminate camout and recess fallaway with elliptically based geometry and vertical sidewalls..
  • [PREMIUM QUALITY]: High-strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance and S2 alloy steel bits reduce wear-outs and ensure longevity and the tamperproof bits are made of CrV for extra strength..
  • [PRECISION]: Precisely machined bit tips ensure accurate size with a 0° drive angle that eliminates radial force preventing fastener recesses and gives access to nuts and bolts on European and Japanese cars and trucks..
  • [INCLUDES]: Set includes 1/4" drive (4mm, 5mm, 6mm), 3/8" drive (8mm, 9mm, 10mm, 12mm, tamperproof 14mm) and 1/2" drive (tamperproof 16mm and tamperproof 18mm)..
Check Stock

Qnkaa XZN Triple Square Spline Bit Socket Set 10pcs Silver M4 - M18 Premium S2 Alloy Steel 1/4” 3/8” 1/2” Drive

  • Made from premium material: drop-forged, heat-treated S2 Alloy Steel bits and CRV sockets guarantee excellent durability..
  • Corrosion-Resistant: fully polished, Chrome plated mirror finish sockets and Zinc Phosphate bits treatment..
  • The Triple Square spline socket set comes with a tight and durable case, which is easy to carry and keep! The sizes are also stamped beside each slot for identification!.
  • Triple Square Bit Socket Set Contents: 1/4” Drive: M4, M5, M6, 3/8” Drive: M8, M9, M10, M12, M14, 1/2” Drive: M16, M18..
  • We are dedicated to ensuring your 100% satisfaction, If you have any issue during use, please feel free to contact us, our technical staff will reply and resolve the problem within 24 hours..
Check Stock

CASOMAN 9-Piece Low Profile Impact Triple Square Bit Socket Set, Includes Storage Rail, 1/4", 3/8" and 1/2" Drive, CR-MO Steel, Designed for Impact Use

  • Made of drop forged, heat treated chrome molybdenum steel with a corrosion-resistant black phosphate finish..
  • 9-Piece Low Profile Impact Triple Square Bit Socket Set Include: 1/4"Dr. Bit:M4, M5, M6, M8.
  • 1/2"Dr. Bit:MT16, MT18. Includes Storage Rail..
  • Designed for Impact grade strength, low profile design for confined, hard to reach areas. Insert smoothly with precision chamfered bit ends.
  • High-contrast size marking is permanently laser and easy to read, even in low light..
  • Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty..
Check Stock

J&R Quality Tools XZN Triple Square Spline Bit Socket Set, S2 Steel | 10-Piece Set

  • DURABILITY: bits made of premium S2 alloy steel for superior hardness that reduce wear-outs and insure longevity.
  • TORQUE STRENGTH: high strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance.
  • PRECISION BITS: precisely and automatically machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges.
  • ORGANIZED STORAGE: set includes a sturdy plastic organizing case for secure storage and easy carrying.
  • 10-Piece XZN triple square spline bit socket set includes: 1/4" Drive: 4mm, 5mm, 6mm.
  • 3/8" Drive: 8mm, 9mm, 10mm, 12mm, 14mm (tamper proof).
  • 1/2" Drive: 16mm (tamper proof), 18mm (tamper proof).
Check Stock

Capri Tools XZN Triple Square Spline Bit Socket Set Metric 10-Piece

  • Drop-forged, heat-treated S2 steel bit set that will last longer than any others in its class.
  • These XZN/Triple Square bits are great for working with BMW, Mercedes, VW, Audi, Porsche, and most other European vehicles.
  • Capri Tools provides a lifetime replacement guarantee.
  • Sizes: 1/4": 4MM, 5MM, 6MM - 3/8": 8MM, 9MM, 10MM - 1/2": 12MM, 14MM, 16MM, 18MM.
Check Stock

CASOMAN 10PCS 1/4-Inch 3/8-Inch & 1/2-Inch Drive XZN Triple Square Spline Bit Socket Set M4-M18 12 Point Tamper Proof Cr-V Sockets and S2 Steel Bits

  • Bits made of premium S2 alloy steel for superior hardness and insure longevity,Cr-V steel sockets provide superior torque for greater turning power..
  • Triple square spline bit sockets set include: M4, M5, M6, M8, M9, M10, M12, M14, M16, M18..
  • Precisely and automatically machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges..
  • Large, clear die-stamped size marking is easy to read and can’t wear off..
  • Come with a heavy duty blow molded storage case, easy to carry. Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty..
Check Stock