Reviews Transmission Axle

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

Maxtrac Suspension 301360 5-6In Adj Rear Flip Kit

  • Incl. Axle Retainer/U-Bolt/Spring Plates.
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Genuine Ford Fluid TA-29 Ultra Silicone Sealant - 2.4 oz.

  • Resistant to oil, transmission fluid, gear oils and coolant.
  • For use on transmission pans and covers, axle cover plates and transfer case covers.
Check Stock

Athena (P400250850252/1) Complete Engine Gasket Kit

  • Fitment: Our this 4-Stroke Motor Short Case Engine only compatible with 150cc engine size two-wheeled scooters(Not suitable for go kart)..
  • This 150cc motor only suitable for 10" tire.Widely used in all kinds of two-wheeled scooter.
  • without reverse gear, continuously variable.
  • Transmission CVT: CVT consist mainly of 2 transmission pulleys and 2 transmission belts.
  • It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • This complete engine set includes carburetor, CDI, starter solenoid, coil,kick start lever..
  • This 150cc motor without reverse gear, short axle, short box, it can be installed on the ATV, but you need to install an additional reverse gear.
Check Stock

Trolli Sour Crunchy Crawlers Berry Lemonade 3.8 oz (Pack of 12)

  • [Wild slayer gallops in the mountains and forests] The image of big feet combines red, yellow and blue sprayed body, personalized stickers to beautify the appearance, typical American wild, showing the hormonal charm of retro American wild life, running fast, chasing deep forest, Swamp and other complex terrain..
  • [3-8km/h travel speed two-speed transmission] FCX24 1/24 Power Wagon has two-speed mechanical transmission, which can switch between 3km/h and 8km/h. It travels at high speed on flat ground and moves forward slowly when climbing..
  • [Portal Axle + 24 Ball Bearings] Using non-load-bearing frame, portal axle, 24 ball bearings, 4-link suspension, etc., elevate the frame, reduce the loss of the car, prolong the life of the car, drive Faster speed and longer standby time..
  • [Quick release structure of car shell + Ready to Run] The FCX24 1/24 Power Wagon can quickly remove the car shell in 5 seconds, install and adjust the battery efficiently.
  • combined with RTR mode, open the remote control to run, which is friendly to both novice and professional players..
  • [3 months quality service + 24 hours customer service] FMS 1/24 Power Wagon can enjoy 3 months quality maintenance service, we will respond to your doubts within 24 hours, warm and considerate..
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • ...re comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • 【100% SATISFACTION GUARANTEE 】If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Monster Jam Grave Digger The Legends with Re-Crushable Car

  • 1/10 scale 4X4 straight-axle radio control truck delivers rugged performance and scale realism for RC bashers of all skill levels.
  • AX10 transmission with all metal gears, SMT10 tube-frame chassis, AR60 OCP-Axle, 2. 2 MT wheels, and BKT Monster Jam tires.
  • WB8 Wildboar driveshafts, rear sway bar, multiple shock mounting positions, hydraulic ram style steering links, and trailing arm 4-linked suspension.
  • Licensed Grave Digger ‘50s-era panel van body with graveyard paint scheme, chrome Zoomie headers and driver figure with glow-in-the-dark helmet.
  • REQUIRES: 2S LiPo Battery Pack (IC3 connector), Compatible Charger, 4xAA Batteries.
Check Stock

Axial 1/10 SMT10 4WD Monster Truck Raw Builders Kit, AXI03020

  • Monster Truck RAW Builder’s Kit — a true-to-scale, 4-wheel drive, straight-axle RC truck that offers an ideal foundation of performance and realism..
  • The AX10 transmission included with the SMT10 Monster Truck RAW Builder’s Kit is designed to make the most of your motor’s power..
  • The rugged, straight-axle 4WD chassis provides the perfect platform for your choice of body, wheels, tires and electronics..
  • Add your choice of body, wheels, tires and electronics and unleash your inner beast!.
  • Scale realism and strength are achieved through triangulation of the chassis tubes, making it ready for maximum attack and hard core Monster Truck bashing..
Check Stock

DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function

  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
  • Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

DDCSV3.1 Standalone Motion Controller off-line 100 Pulse MPG Handwheel Emergency Stop for CNC Router Engraving Machine (3-Axis with MPG)

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
  • USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..
Check Stock