Reviews Transfer Switch Isolation Switch

SZC23-NO-AL-CH Current Switch Relay - Normally Open Current Sensing Switch Adjustable AC 0.2-30A

  • 1. SELF-POWERED: Self-powered, no external power supply required..
  • 2. CONTACTLESS ELECTRONIC SWITCH: High-power MOS tube contactless electronic switch..
  • 3. STRUCTURE DESIGN: Straight-through structure design, isolation withstand voltage up to 2000V..
  • 4. CONTACTLESS ELECTRONIC SWITCH: High-power MOS tube contactless electronic switch..
  • 5. SUITABLE FOR: Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

CX210A CX-210A CX210-A Original Diamond Heavy Duty Wideband Coax Switch

  • Coax Switch, Manual, 2-position, Heavy Duty Wideband, DC to 1,000 MHz, 1,500 W max., UHF female/SO-239s, Each.
  • The Diamond CX210A is a low loss, two position coaxial switch providing very low loss and high isolation. It is rated DC to 1000 MHz and can handle up to 1500 watts CW at HF frequencies..
  • There are two removable screws on the bottom of the switch which may be used for mounting..
  • DIAMOND DC ~ 1000 MHz 2 Position Antenna / Coaxial Switch, Power: 1.5 kW, Connector: SO-239.
Check Stock

Battery Switch Wenyrich 12-48V Battery Disconnect Master Power Cut-Off Switch for Marine, Boat RV(On/Off)

  • Battery switch m series ON/OFF with knob, part number 6006, is a single loop ON-OFF switch. Switch a single battery to a single load group, suitable for low amperage battery switch hole style..
  • Anti-ignition, can be safely installed on gasoline-powered boats, the chassis design allows surface, front panel or rear panel installation..
  • The contact design before the break point can switch between battery packs without interrupting the power supply..
  • 300A continuous rating-45% higher than standard switch, continuous rating: 300A, maximum voltage: 48V DC, with luminous label..
  • Isolation cover with buckle part can protect the rear contact..
Check Stock

Nintendo Switch 64 GB Micro SD Memory Card [Hori Japan]

  • High Speed Transfer! The perfect micro SD card for your Nintendo Switch.
  • This is a 64GB micro SD card model for Nintendo Switch.
  • Valid for extended storage such as download data Supports high-speed transfer mode ideal for Switch body specs Stress-free data transfer.
  • Transfer mode: SDR104 compatible, UHS Class I, Speed Class 10, Read 80 MB/s 15 MB/s.
  • Officially licensed Nintendo product that meets write testing.
Check Stock

Power Switch M Series Battery Switch,300A Battery Disconnect Switch,Used for Battery Switch Single Circuit Marine OnOff Red

  • The contact design before the break point can switch between battery packs without interrupting the power supply..
  • Battery switch m series ON/OFF with knob, part number 6006, is a single loop ON-OFF switch. Switch a single battery to a single load group, suitable for low amperage battery switch hole style..
  • Anti-ignition, can be safely installed on gasoline-powered boats, the chassis design allows surface, front panel or rear panel installation..
  • 300A continuous rating-45% higher than standard switch, continuous rating: 300A, maximum voltage: 48V DC, with luminous label..
  • Isolation cover with buckle part can protect the rear contact..
Check Stock

TRENDnet 8-Port Gigabit Long Range Poe+ Switch, TPE-LG80, 65W Poe Budget, Ethernet/Network Switch, Long-Range Poe+ Extends Range Up to 200M (656 ft.), 16 Gbps Switching Capacity, Lifetime Protection

  • ETHERNET PORT CONFIGURATION: 8 Port Gigabit Long Range PoE+ Switch includes 8 Gigabit PoE+ ports provide a 16Gbps switching capacity to support edge network installations..
  • PoE+ POWER: A 65W PoE power budget supports up to eight Power over Ethernet devices. TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras..
  • PoE and PoE+ SUPPORT: It supports both PoE and PoE+ devices with a 65W PoE power budget..
  • LONG RANGE PoE+: Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations..
  • PORT ISOLATION: Ideal for surveillance networking applications, the DIP switch also enables port isolation.
  • LOW-NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise.
  • PLUG-AND-PLAY: Easy setup, simply power up the switch and plug in connected devices.
Check Stock

NC 300A Power Switch M Series Battery Switch Used for Battery Switch Single Circuit Marine OnOff Red

  • 1. Battery switch m series ON/OFF with knob, part number 6006, is a single loop ON-OFF switch. Switch a single battery to a single load group,....
  • 2. The contact design before the break point can switch between battery packs without interrupting the power supply..
  • 3. Anti-ignition, can be safely installed on gasoline-powered boats, the chassis design allows surface, front panel or rear panel installation..
  • 4. Isolation cover with buckle part can protect the rear contact..
  • 5. 300A continuous rating-45% higher than standard switch, continuous rating: 300A, maximum voltage: 48V DC, with luminous label..
Check Stock

Normally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH

  • Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
  • Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
  • Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
  • High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
  • Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..
Check Stock

Switch HDMI Adapter Hub Dock Portable Dock with HDMI TV and USB 3.0 Port and PD Charging Compatible with Nintendo Switch MacBook Pro/Air Samsung/Chromebook Pixel/Dell XPS13 and More

  • 【Reliable Replacement】Replace Original Switch Dock - An exclusive designed 1080P HDMI Type C adapter to replace your original Switch dock.....
  • 【Portable & Dissipate Heat 】The switch HDMI adapter with pocket-size and Aluminium alloy lightweight design, easily take it to travelling,....
  • 【3-in-1 Multi Ports Design】The switch dock with1*USB 3.1 + 1*HDMI + 1*USB Type-C charging port, Perfect support for Switch, Samsung S8/S8+ S9/S9+,....
  • 【4K HDMI High Speed Transfer】The switch hdmi cable with USB 3.0 port provide highest peak data transfer speed up to 5 Gbps, 10x faster than USB....
  • 【Kindly note】This Switch TV Adaptor is compatible with the new 6.0.0 update.The small Switch HDMI converter is powered by an external power and....
Check Stock

STEREN Network Switch - Coax Splitter 2 Way - Antenna Splitter - Manual Transfer Switch - Coax Cable Splitter 2 Way - Coaxial Cable Adapter for TV - 2 Way Coax AB Switch for TV - 1 Pack 200-315

  • COAX CABLE SPLITTER: This is the Steren 200-315 2-Way coaxial cable splitter and AB Switch for TV..
  • 2 WAY COAX SPLITTER: Switch between 2 connections for antenna, cable, satellite or video games..
  • F TYPE COAX CONNECTIONS: Use this RCA switch as a video switcher with F Type coax connections..
  • EASY TO INSTALL: No need to unplug wires when switching between devices with our TV AB switch..
  • HIGH ISOLATION 90 DB AB SWITCH: Eliminate interference from external devices and cross-talk..
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

FYOUNG Extender Cable Replacement for Nintendo Switch/Switch OLED Dock, Support 10 Gbps Data Transfer Rate - 3.28 feet

  • ... this extender cable and the playstand (not included),it can help to dissipate heat rapidly because when you put the game console in the dock,it will cause poor heat dissipation.This can solve the problem of deformation when Switch is put in the dock..
  • FAST CHARGING - The USB C cable enables super speed USB 3.1 data transfer speeds, (Data speed up to 10Gbp/s) with compatible USB 3.0.It can work replacement for pro controller/Switch Console /dock.
  • MUL-TIFUNCTIONAL - You can use it as a extender cable of Switch charging power supply.You also can use it as a extender cable compatible with Pro controller of switch. And furthermore,it can be used as a extender cable of dock to transfer data,video and sound..
  • SAFE & RELIABLE - It is protective and sturdy. Easy to plug and stable for Switch dock.It also support Type-C port compatibale with Pro controller,smartphone to charge and transfer data,video.It not only can avoid overheating, but also scratching the screen and the inconvinent size for travelling cropping up..
  • NICE REPLACEMENT - It can replace your lost or broken cable.Treat yourself to new exciting gaming with Switch controller with extended link extension and offer yourself the most precious play time with friends!You don't need to remove your case!.
Check Stock

AC Current Switch SZC03-NC-AL-CH Adjustable Current Sensing Switch for Fflash Buzzer Relay and Single-Chip AC 0.5-200A

  • HIGH QUALITY: The shell of current sensing switch is made of self-extinguishing ABS material for long lifespan, durable and safe to use. It has traight-through structure design, isolation withstand voltage up to 2000V, powerful and reliable. Hysteresis is less than 1% and can be used under strong magnetic conditions..
  • GOOD PERFORMANCE: The switch can open and close without limitation, and the reaction speed reaches the ms level, quick response and low power consumption..
  • ADJUSTABLE: This adjustable switch with a potentiometer is self-powered, no external power supply required. Action current 0.5-200A AC..
  • WIDE APPLICATION: The switch is widely used for monitoring current in substations, variable frequency speed control devices, inverter devices and other electric equipment..
  • CONVENIENT: The high-power MOS tube contactless electronic switch is equipped with LED indicator which can conveniently and intuitively indicate the working status of the switch..
Check Stock