Reviews Transfer Punch Set Made In Usa

VCT 28pc 3/32 - 1/2 Transfer Punch Set Steel Toolmaker Machinist Thread Tool Kit Set

  • This transfer punch set takes the guesswork out of transferring threaded, drilled or reamed machining, for accurate hole-drilling operations in home or hobby work..
  • Each punch is made high quality heat-treated alloy steel with a black oxide finish for durability and rust resistance to ensure long lasting service life of your tool set in your tool collection..
  • The precisely machined point on the transfer punches is suitable for toolmakers and machinists alike and allows the user to execute accurate holes of the same size when needed..
  • A wide set of transfer punches from 3/32" to 1/2" by 1/64 inch increments, punches are 4 7/8" Long.
  • This drilling punch set includes an easy-to-see index stand to keep tools stacked and ready to pull in a convenient and organized way to keep the workspace neat and allow quick access to the tool user..
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

HORUSDY 28-Piece Transfer Punch Set 3/32 - 1/2 Heat Treated Alloy Steel Forging

  • Each punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film..
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations.
  • Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull.
  • Precision indexing punch for tool builders and mechanics.
  • Wide set of transfer punches from 3/32" to 1/2" by 1/64".
Check Stock

3 Pcs Brass Drift Punch Set 3/4 1/2 3/8 Inch 25075 25076 25077 Brass Punch Kit

  • 3 Pieces brass drift punch set: you will get 3 brass punches in 3 sizes, including 1 piece of 3/4 inch 25075 brass punch, 1 piece of 1/2 inch 25076 brass punch and 1 piece of 3/8 inch 25077 brass punch.
  • Quality Material: made of sturdy brass for good durability and machinability, the well polished surface is rust and corrosion resistant.
  • Excellent Grip: the brass drift punch with knurled feature providing with an excellent grip and an effective use, offering you convenience for engineering or construction.
  • Nice Performance: the brass punch set is applied to transfer the force of the hammer to a specific location so that to remove or loosen parts or pins.
  • No sparking, no marring to the hard steel, more reliable.
  • Use Widely: the brass drift punch is suitable for manufacturing, auto repair, woodworking, mining industries and more.
Check Stock

MJIKOO 28-Piece Transfer Punch Set, 3/32 Inch - 1/2 Inch, Heat Treated Alloy Steel Forging,as shown

  • Each punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film..
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling s,Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull..
  • Precision indexing punch for tool builders and mechanics..
  • Wide set of transfer punches from 3/32 inch to 1/2 inch by 1/64 inch.
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

GRACE USA PS-7 Gun Care Steel Punch Set Gunsmithing Gunstock

  • This Beautifully Crafted Punches In This 7 Piece Punch Set Are Machined From Steel And Are Nickel-Chrome Plated..
  • Set Includes Sizes 5/64", 1/16", 3/32", 1/8" And 5/32", 1 Center Punch, And 1 Starter Punch. The Set Comes In A Vinyl Pouch..
Check Stock

Mayhew 62254 Pro Pilot Punch Kit, 12-Piece

  • Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.
  • Drives and removes roll pins and other hollow tension pins.
  • Black oxide finish for additional rust protection.
  • 12-Piece Set includes: 1/16 x 2-3/4" Pilot Punch, 5/64 x 3/14" Pilot Punch, 3/32 x 3-1/2" Pilot Punch, 1/8 x 4" Pilot Punch, 5/32 x 4-1/2" Pilot Punch, 3/16 x 4-1/2" Pilot Punch, 7/32 x 5" Pilot Punch, 1/4 x 5-1/2" Pilot Punch, 5/16 x 6" Pilot Punch, 3/8 x 6" Pilot Punch, 7/16 x 6" Pilot Punch, 1/2 x 6" Pilot Punch.
Check Stock

LLDSIMEX 28 Piece Transfer Punch Set 3/32 -1/2 by 64ths Plus 17/32

  • Heat treated tempered tool steel for longer life.
  • Wide set of transfer punches from 3/32" to 1/2" by 1/64".
  • includes 17/32" transfer punch，Length： 4.87 Inch.
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations.
  • Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull.
Check Stock

General Tools S1270 Gasket Punch Set, Set of 10 Punches

  • This convenient gasket punch set offers everything you ll need to make effortless punch holes in gasket material, soft sheet metal and leather.
  • An assortment of 10 punches, each of which fits snugly onto the solid steel driving mandrel.
  • The set includes gasket punch sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, and 1 inch.
  • Includes a molded plastic storage case for easy storage.
Check Stock

GRACE USA Gun Care Tool Set In Nukaf Case, Tools for Gunsmiths, Includes Screwdrivers, Brass Punches and 17 Tool Set, Made in USA

  • SET INCLUDES: 8 piece gun care screwdriver set, 8 piece brass pin punch set, & 8 oz brass hammer.
  • SCREWDRIVER SET: Custom hollow ground to fit scope screws, plug screws, guard screws, floor plate, sight screws, and many other gun screws.
  • BRASS PUNCH SET: Consists of eight brass pin punches sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16".
  • 8 OZ BRASS HAMMER: Hand-turned from CDA 360 brass rod, extruded in a USA mill, beautifully hand-polished.
  • GRACE USA TOOLS ARE PROUDLY 100% MADE IN THE USA.
Check Stock

Lord & Hodge 1073A-0 1/4\ Handi Grommet KIT

  • C.S. Osborne Brass Plain Rim Grommets And Washers..
  • Brass material with brass finish grommets and washers. You will receive 144 grommets and 144 washers. Made in USA..
  • Size : 4. Diameter of hole : 1/2". 144 washer and grommets per gross.
  • Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool..
  • Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch..
Check Stock

Gray Tools 3 Piece Brass Drift and Line Up Punch Set, Made in USA

  • COMPLETE BRASS PUNCH SET: this set includes 1 brass drift punch (3/4” x 12”) and 2 brass line up punches: (3/8” x 10” and 7/16” x 14”)..
  • SUPERIOR QUALITY: Gray Tools brass pin punches are Made in the USA and backed by Lifetime Warranty.
  • USER-FRIENDLY DESIGN: Knurled body provides superior grip and hold..
  • IDEAL FOR NON-MARRING AND NON-SPARKING APPLICATIONS: Popular uses include gunsmithing, car repairs, oil, gas, chemical, and mining industries..
  • EASY TO USE AND STORE: Durable canvas storage pouch is included with each set..
Check Stock