Reviews Transceiver Module

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

• NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
• Support up to six channels of data reception.
• the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
• A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
• RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
• Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
• Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

• It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
• 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
• 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
• RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
• The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (3M, OM3-5Pack)

• ...LEX — 50/125 micron fiber cables with dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
• OM3 LOMMF (laser optimized multi-mode fiber) rated.
• Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC’s.
• ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..

Digital Optical Audio Cable Toslink Cable - [Cotton Braided Jacket,Durable and Flexible]EMK Fiber Optic Cord for Home Theater, Sound bar, TV, PS4, Xbox & More (6.6Ft/2m)

• ...LEX — 50/125 micron fiber cables with dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
• OM3 LOMMF (laser optimized multi-mode fiber) rated.
• Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC's.
• ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..

Jeirdus for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L, Gigabit SFP Transceiver Module, 1000Base-LX/LH, SMF, 10km 1310nm Duplex LC Connector

• Compatible for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L.
• 1000Base-LX/LH, SFP transceiver module for SMF, 1310-nm wavelength, dual LC/PC connector.
• 1G SFP Transceiver, SFP LX/LH, 1000Base-LX/LH SFP, 10km.
• Compatible with Cisco.Jeirdus owns Compatibility LAB to meet the coding requirements for various brands of switches and routers.Each transceiver is individually tested before delivery..
• 100% new materials,high Quality with CE, FCC,3 year replacement and lifetime warranty.

ACEIRMC 4pcs AT-09 Bluetooth 4.0 Transceiver BLE Module Serial Port CC2541 HM-10 MLT-BT05

• The AT-09 is a module that contains a BLE chip (CC2541)..
• This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
• This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
• When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
• The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..

Logarithmic Amplifier Module ±0.4 DB RSSI Linearity with Limiting Output Can Be Used As FSK PSK Demodulation

• AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
• APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
• 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
• ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
• Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..

Logarithmic Amplifier Module ±0.4 DB RSSI Linearity ‑95 DBM Intercede, Sma Female Can Be Used As FSK PSK Demodulation

• 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
• APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
• Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
• ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
• AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..

10Gb SFP+ RJ45 Transceiver 10Gbase-T SFP+ Ethernet Copper Module Compatible with Cisco SFP-10G-T-S Ubiquiti UF-RJ45-10G UniFi Meraki MikroTik Supermicro and More Cat6a/ Cat7 30m

• ✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA....
• ✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Netgear, QNAP, D-Link, Supermicro, TP-Link and and Other....
• ✅ Easy to Use: PLUG and PLAY, Hot-swappable. Rotate the ring latch down at a 90 degree angle to unlock it, then pull the transceiver out of sfp+....
• ✅2.5 Power Consumption: Adopted the latest IC: Marvell 88X3300power, Low EMI and advanced ESD protection. 10Gbase-T module is recommended to be used....
• ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support..

QSFPTEK 10GBASE-ER SFP+ Module, 10giga Mini GBIC SFP 1550nm, 40km, 10GE Gigabit Ethernet DDM LC Single-Mode Fiber Optic Transceiver for Cisco SFP-10G-ER, Ubiquiti, Netgear, Mikrotik

• Wide Compatibility: Compatible for Cisco SFP-10G-ER, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
• 10GBASE-ER SFP+ fiber module: 10Gb/s data rate, duplex LC connector, 1550nm wavelength, the transmission distance up to 40km, working temperature: -5℃ ~ +70℃, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): ＜ -15.8..
• Easy to use: SFP+ 10G single-mode transceiver, plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems..
• 100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy..
• We offer many compatible options, if your brands are not listed here, please contact us. QSFPTEK is a manufacturer of transceiver, customized service is available..

16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception

• Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
• RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
• Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
• Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
• Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..

100dB Logarithmic Amplifier Module Dynamic Range Detection with Limiting Output for FSK PSK Demodulation 5MHZ‑500MHZ

• WORKING PRINCIPLE - Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
• STABLE AND ACCURATE - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
• WIDELY USED - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
• WITH LIMITING OUTPUT - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
• PARAMETER RANGE - 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..

Fiber Optic Transmitters, Receivers, Transceivers PIN 10GBASE-LR, 10.3 Gb/s transponder10km