Reviews Trailer Tent Kit

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • UPGRADE TRAILER LIGHT: Come with additional atomization strip, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights. No glare LED, maximizing light output and giving motorists behind you a better indication of when you're braking, turning or reversing and thus boosting their response time..
  • SEALED WATERPROOF TRAILER LIGHT: No screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible. Also, it can effectively resist damage of sand, dust, dirt, snow and other horrible weather..
  • SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use..
  • DOT APPROVAL: Kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, like boat trailer, RV, camper, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This ut....
Check Stock

(New) 2- Trailer axle Spring Perch/seat for 1-3/4\ 2000# Round Axel Tube Mount Pad + Check All Models in The Description

  • Rockwell American 3,500 lb Idler Axle - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

Amy Bradley Designs ABD269 Campers Quilt Pattern , Blue

  • Campers quilt pattern includes full size patterns, placement sheets, and instructions to make a 40" x 54" Camper Trailer Quilt, an 18" x 18 1/2" Welcome Wall hanging, and a Custom Size Camping Family Wallhanging..
  • Choose From Ten Different Family Members, Cat, Dog, Tent or Camper..
  • The Camper Trailer block size is 10 1/2" x 14 1/2"..
Check Stock

3.5k-3500 Lb Capacity Trailer Axle Beam Only-Utility/RV/Boat (89\ Hubface-74 Spring Center)

  • Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (2) 3,500 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

Gravity Tilt Deck Kit for Trailers | Hydraulic Tilt Deck Kit

  • Gravity Tilt Deck Kit For Trailers : Kit includes: Hoses and Cylinders Assembled and Filled with Oil, Hydraulic Fittings, Two cylinder supports, Two Toggle Clamps, Safety Signs, Two Hinges, 15 oz Johnson Trailer Parts Premium Ceramic Coffee Mug!.
  • Have you ever seen a car being driven up on a trailer while the trailer is tilted like a ramp?.
  • That is because the trailer has a tilt deck kit installed. Tilt Deck kits are designed to make loading and unloading of cars, truck, tractors, and vehicles of any type much easier. No need to mess with ramps, just drive on and drive away..
  • Please contact us if you have any questions we can assist you with..
  • 32 oz Johnson Trailer Parts Double Walled Insulated Mug.
Check Stock

18 x 80 Car Carrier Trailer Plans Blueprints Model 1218-80

  • Features: | Engineer Approved & Stamped Full Sized 24" x 36" Blueprints | Suitable for High School Shop & Ag Classes, Industry, & Do-it-yourselfers | Detailed Cut List w/ Full Bill of Materials & Welding Tips | Tailored TK Trailer Kit to ensure all the right parts for the plan all packaged up for your convenience. | This plan is specifically made for ( | SOLD SEPARATELY): | TK Trailer Kit - Master Plan 1218 - 8' x 18' Tandem Axle 7K or 10.4K Util.
  • Suitable for High School Shop & Ag Classes, Industry, & Do-it-yourselfers.
  • SEARCH ASIN: B07WGX7697 (7K kit) or ASIN: B07WQFWTZK (10.4K kit) for a complete specifically tailored trailer parts kit for this blueprint.
  • 19 How-to Steps w/ Blueprint and a Detailed Cut List w/ Full Bill of Materials & Welding Tips.
Check Stock

CURT 17200 Trailer Anti-Sway Bar Control Kit , Black

  • IMPROVED CONTROL. This trailer sway control kit helps limit your trailer’s lateral movement, using a brake pad type material to restrict and deter trailer sway.
  • VERSATILE. This trailer sway bar is compatible with a wide variety of weight distribution hitches, including almost all CURT weight distribution hitches. It can also be used on most A-frame trailers.
  • HIGHLY ADJUSTABLE. This sway bar hitch easily adjusts for different trailer types and load sizes. It uses a simple hex nut toggle to adjust the level of trailer sway restriction.
  • EASY SETUP. Setting up this trailer sway control unit with your weight distribution hitch is fast and easy. With the included trailer balls mounted in place, the simply on-off handle makes it easy to engage or disengage the sway control whenever needed.
  • COMPLETE KIT. This anti trailer sway bar includes everything needed for installation on your camper or RV as well as your weight distribution hitch or sway tab ball mount #45820.
Check Stock

ProRac RVPB-020-1 2-Bike Carrier Tent Trailer Bike Rack

  • Telescoping uprights are fully adjustable to achieve the correct height for your tent trailer.
  • Load bars have an integrated T-SLOT providing a clean looking and secure mounting method for bike skewers and wheel holders.
  • No drilling in the roof means no warranty issues.
  • Convenient front loading design is easy and accessible.
Check Stock