Reviews Trailer Jack Footplate

RVMATE Electric A-Frame Trailer Jack up to 3500lbs Heavy Duty RV Electric Power Tongue Jack with Accessories Manual Crank Handle and Level, 18" Lift, 12V DC and Bright LED Lights, Black

  • ... Manual. Red wire(+) connect to 12-volt power source..
  • 【DURABLE AND STURDY】Made of heavy duty steel, the electric A-frame trailer jack is rated capacity up to 3500LBS. Durable exterior black powder-coat finish on outer tube and zinc finish for inner tube with removable footplate will provide good surface protection and greatly reduce the rusty risks..
  • 【TERRIFIC FEATURES】The purpose is for use with trailers with a A-frame coupler by wiring to 12-volt power source. The maximum travel is 18in. the standard tube diameter for a-frame trailer jacks is 2.25 inches, and the drop leg travel is 5-5/8in. Four holes on the footplate bracket are for height adjustment by securing with the locking pin. Bright LED lights are illuminated for night time..
  • 【TIME-SAVING】Just push the UP switch to extend the jack until the footplate touches the ground. Retract the jack by pushing the DOWN Switch. The jack will slow down and stop as it approaches the fully retracted position. Release the switch at first sign of slowing. DO NOT retract the jack exceeding the STOP limiting mark otherwise may result in damage of the jack..
Check Stock

Trailer Jack Wheel, Dual Trailer Swirl Jack Caster Wheel for Trailer, Boat, Hitch Camper, RV, Soft Ground Roll - 2000 Lbs, 6'' Caster Trailer Jack Wheel Replacement with Pin, Removable

  • Multifunctional Dual Trailer Jack Wheels - Trailer Jack Wheel compatible with 2" Diameter Jack Tubes, Ideal as a replacement for various trailer jack wheels, Dual Jack Wheel Fits for All Standard trailer Jack, Electric A-Frame Jack, Boat, Hitch campers, easy to move popup camper, pop up traile, utility trailer, boat trailer, flatbed trailer, Any Jack.
  • Utility Trailer Wheel - Perfect as a 6-inch caster trailer jack wheel replacement, wheel for trailer jack Maximum load capacity of 2000 pounds. Comes with a heavy duty retaining Clip-Pin, The weld for the lock nut is Very tight and will not loosen. Allow for quick, secure attachment.
  • Caster trailer Wheels for Easy Mobility - 6" poly wheel for convenient trailer mobility and coupling. Trailer swirl jack wheel add mobility to your boat trailer or utility trailer，When the jack is connected, the vehicle can move more flexibly, and it is more convenient to tow the vehicle and the boat.
  • Upgrade Caster Trailer Jack Wheel - The boat trailer jack wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resis....
Check Stock

CURT 28276 6-Inch Caster Trailer Jack Wheel Replacement, Fits 2-In Tube, 1,200 lbs

  • EASY MOBILITY. Add mobility to your boat trailer or utility trailer with this 6-inch x 2-inch trailer jack wheel. It attaches to the trailer jack and allows for easier movement of the trailer, especially when coupling.
  • RELIABLE STRENGTH. Perfect for a wide variety of trailer types, this trailer jack caster wheel is rated to support up to 1,200 pounds tongue weight.
  • VERSATILE DESIGN. Perfect as a trailer jack wheel replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube.
  • INCLUDED PIN. For immediate installation, this trailer tongue jack wheel comes with a safety pin included. The safety pin secures the wheel onto the jack and can quickly be removed if needed.
  • CORROSION-RESISTANT. This jack caster also makes an excellent boat trailer jack wheel. The bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance.
Check Stock

CURT 28272 Trailer Jack Foot, Fits 2-Inch Diameter Tube, Supports 2,000 lbs

  • TRAILER STABILITY. Add stability to your trailer with this simple but sturdy trailer jack foot. It attaches to the trailer jack and allows for increased stability of the trailer tongue when parked or loading.
  • RELIABLE STRENGTH. Perfect for a wide variety of trailer types, this trailer jack foot plate is rated to support up to 2,000 pounds tongue weight.
  • VERSATILE DESIGN. Great for use as a trailer jack foot replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube.
  • INCLUDED PIN. For immediate installation, this trailer tongue jack foot comes with a safety pin included. The safety pin secures the foot onto the jack and can quickly be removed if needed.
  • CORROSION-RESISTANT. This trailer support jack foot is constructed from zinc-plated steel for long-lasting corrosion resistance in spite of rain, dirt, road grime and other elemental threats.
Check Stock

Trailer Jack Wheel 2000 Lbs, Dual wheel Jack Caster Wheel Replacement, 6' Swivel Trailer Tongue Jack Wheel with Pin Fits Any Jack, Boat, Hitch Camper Soft Ground Roll

  • Flexible and Convenient to Move: This 6'' Trailer Jack Swivel Caster dual Wheel add mobility to your boat trailer or utility trailer，When the jack is connected, the vehicle can move more flexibly, and it is more convenient to tow the vehicle and the boat..
  • 2000 lbs Capacity: wheel for trailer jack Maximum load capacity of 2000 pounds, Perfect for a wide variety of trailer types, Any Jack, Boat, Hitch Camper，Included safety pin allows for quick, secure attachment.
  • Suitable for 2 inch Jack：Perfect as a trailer jack wheel replacement, the dual wheel trailer jack wheel fits any trailer jack Compatible with 2" Diameter Jack Tubes, Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable.
  • Corrosion-Resistant: This boat trailer jack wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance.
  • Half Year Warranty：we has a group of professional and advanced production equipment of trailer towing accessoriesand technical personnel who can provide customers with high-quality products，We believe you will be satisfied with our products, we provide Half year warranty service of trailer accessories.
Check Stock

E-SDS Trailer Jack Wheel 2000 Lbs, Dual Wheel Jack Caster Wheel Replacement, 6" Swivel Trailer Tongue Jack Wheel with Pin Fits Any Jack, Boat, Hitch Camper Soft Ground Roll

  • Flexible and Convenient to Move: This 6'' Trailer Jack Swivel Caster dual Wheel add mobility to your boat trailer or utility trailer，When the jack is connected, the vehicle can move more flexibly, and it is more convenient to tow the vehicle and the boat..
  • 2000 lbs Capacity: wheel for trailer jack Maximum load capacity of 2000 pounds, Perfect for a wide variety of trailer types, Any Jack, Boat, Hitch Camper，Included safety pin allows for quick, secure attachment.
  • Suitable for 2 inch Jack：Perfect as a trailer jack wheel replacement, the dual wheel trailer jack wheel fits any trailer jack Compatible with 2" Diameter Jack Tubes, Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable.
  • Corrosion-Resistant: This boat trailer jack wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance.
  • Half Year Warranty：we has a group of professional and advanced production equipment of trailer towing accessoriesand technical personnel who can prov....
Check Stock

Trailer Jack Wheel Replacement 2000 lbs, 6' Trailer Jack Foot Wheel, Dual Wheel Swivel Trailer Tongue Jack Wheel for Trailer Jack with Pin for Boat Trailer Camper Rv

  • 【Compatible with 2" Diameter Jack Tubes】：Perfect as a trailer jack wheel replacement, the dual wheel trailer jack wheel Fits All Standard trailer Jack, Electric A-Frame Jack, easy to move popup camper, pop up traile, utility trailer, boat trailer, flatbed trailer.
  • 【Upgrade Dual Wheel】: Compared with most singel wheels on the market, dual wheel trailer jack wheel replacement are more stable, firmer, and carry more weight.
  • 【Support Up to 2000 Ibs】: Perfect as a trailer jack wheel replacement, support up to 2000 pounds tongue weight, Comes with a heavy duty retaining Clip-Pin, The weld for the lock nut is Very tight and will not loosen.
  • 【Easy Mobility】: Add mobility to your boat trailer or utility trailer with this 6-inch x 2-inch trailer jack wheel, The wheels allow you to move it easily into dirt or concrete campsites, on rough pavement or gravel..
  • 【Corrosion-Resistant】: This trailer jack foot wheel bracket is constructed from zinc-plated steel and the wheel is made from durable poly for long-lasting corrosion resistance, Adapt to any weather.
Check Stock

CURT 28112 Marine Boat Trailer Jack with 6-Inch Wheel 1,200 lbs 11 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,200 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to....
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack wheel.
  • EASY OPERATION. This trailer tongue jack allows for 11 inches of vertical movement and operates using a side-wind handle (12-1/2-inch retracted....
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up....
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a....
Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
  • EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock

CURT 28204 A-Frame Trailer Jack, 2,000 lbs, 15 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 15 inches of vertical movement and can be fully retracted for towing (9-1/4-inch retracted height, 24-1/4-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28250 A-Frame Trailer Jack 5,000 lbs 14-1/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock