Reviews Trailer Hub Caps

GREPSPUD 4pcs 1.98'' Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Cup Wheel Center Grease Cover Caps & 4pcs Extra Rubber Plugs for 2000 to 3500 lb Boat Trailer Dexter EZ Lube Trailer Camper RV

  • 【WITH EXTRA 4 SEALS】- You will receive 4pcs 1.98 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!.
  • 【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality carbon steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your trailer..
  • 【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain..
  • 【SIZE & COMPATIBLE WITH】- OD: 1.98 inch/50.4mm. Please check the size information and compatibility carefully before placing an order. Fits most standard 2000 -3500 pounds trailer wheel hub for both types of axles EZ Lube and standard. Fits standard brake & idler trailer axles for most 4 lug & 5 lug axles with 1.98 in diameter cap..
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the imag....
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98'....
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

Set of 4 Car Push Through Center Caps for 3.31inch Center Bore Auto, Truck or Trailer Wheels and Rims (Silver)

  • 【⚙ Material ⚙】Made of chrome and carbon_steel can be anti rust and waterproof, lasting for long time..
  • 【⚙ Wheel Center Caps Dimensions ⚙】4.25" Diameter (not including Flange), 4.56" Diameter (including Flange), 3.62" Height. Please make sure wheel center hole can fit before any purchase..
  • 【⚙ Compatible with ⚙】Our center hub caps fit 4.25" Center Bore Only, compatible with car, truck and trailer wheels w/ matching hub bore..
  • 【⚙ Package Include ⚙】4x front rear wheel rim center caps..
  • 【⚙ Installation ⚙】Easy to install, Push thru back of wheel..
Check Stock

GTOWNWORKS 4pcs Polished 3" OD Push-Thru Wheel Center Hub Cap 5 Lug, Chrome Silver

  • 【Compatibility 】Universal, fit for Trailer/Truck RV wheel rims..
  • 【Size of the Centre Cap】Push in closed Diameter: 77mm / 3.03in (with bottom lip 86mm/3.39in), Height: 60mm / 2.36in..
  • 【Features】Best quality, ABS plastic, 100% brand new. These car wheel center caps are suitable for front or rear wheels center hubs. It is easy to install, directly click into place after removing your old caps. For many kinds of vehicles. (Size: 77mm, please check the size with your original one).
  • ✔ 【ATTENTION !!】Please do not buy the wheel center cover if you do not know the size of your rim wheels and hub caps! Please measure the size of your rims or old hub caps that you used in the same space very well before ordering!.
  • 【Package】When you purchase a quantity of 1, you will receive 4 chrome silver wheel Push Through Center Cap..
Check Stock

GREPSPUD 2Sets Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Trailer 1-1/16'' to 1-3/8'' Axle, with Extra Dust Caps & Rubber Plugs, 5x4.5 Trailer Replacement Hub 5-Hole Trailer Wheel Hub Kit 5 Lug Bolt

  • 【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs Trailer 1-1/16'' to 1-3/8'' Axles, Spindle #84, EZ-Lube Axle. You will receive 2 sets of 5x4.5'' trailer hubs and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 2pcs dust caps & 4pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!.
  • 【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer..
  • 【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed..
  • 【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating,....
Check Stock

LIBRA Trailer 5 Lugs Idler Hub Kits 5 on 4.5 5x4.5 for 3500 lbs Axle 22017K Pack 2

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug.
  • Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 15 years..
Check Stock

LIBRA Set of 4 Trailer Hub Grease Seals E-Z Lube 5200-7000lbs Axle 2.25 x 3.371-22029

  • ⛵【Safe and Secure】If your trailer is often in a saltwater environment or needs to be driven on the highway for a longer period of time, then this trailer partner bearing protector is vital for the bearings.
  • replacing them is always a hassle and having them allows you to drive with peace of mind that the expiration date can be long..
  • ⛵【Excellent Material】The Wheel buddies made of high quality stainless steel with maximum anti-corrosion ability. It can prevent water and dust from entering the wheel bearings causing damage. There is also a matching silicone trailer bearing dust caps. Having wheel buddies is a good way to extend the life of the bearings..
  • ⛵【Easy Installation】Installation is very easy, no need to use complicated tools, just a board to assist. Wheel buddies also has an automatic check function, you can monitor the oil level at any time by removing the trailer hub cap...
  • ⛵【Accessory Size】 Komsepor bearing protector fits 1.98 inch wheel grease cap bore (please measure your wheel bore before ordering)If you have a lawn mower, then this trailer bearing dust cap may be perfect for you!.
  • ⛵【What you get】Four rubber trailer bearing dust caps and two 1.98" bearing protectors. We offer a 100% guarantee on our bear....
Check Stock

Timeline (Original Mix)

  • 4 x trailer 5 on 4.5" hub drum kits + 4 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle.
  • Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546.
  • Kits also includ: 4x L68149 inner cone bearings and 4x L44649 outer cone bearings, 4x Grease seals 1.719" x 2.565", 4x E Z lube grease caps with rubber plug.
  • Also include: 2 left + 2 right 10"x2-1/4" electric brakes with 3" center bore and 4" mounting bolts circle diamter.
Check Stock

All the Weyrs of Pern

  • 4 x trailer 5 on 4.5" hub drum kits + 4 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle.
  • Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546.
  • Kits also includ: 4x L68149 inner cone bearings and 4x L44649 outer cone bearings, 4x Grease seals 1.719" x 2.565", 4x E Z lube grease caps with rubber plug.
  • Also include: 2 left + 2 right 10"x2-1/4" electric brakes with 3" center bore and 4" mounting bolts circle diamter.
Check Stock

Southwest Wheel 7,000 lbs Trailer Axle Electric Brake Kit

  • Pair of 12" x 2" 8-6.5" bolt circle TruRyde hub and drums 25580 inner bearing 14125A outer bearing.
  • Pair of 12" x 2" TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
  • Comes with TruRyde bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang....
  • Built for 42 spindles with a 5 hole brake flange.
Check Stock