Reviews Trailer Hitch For Subaru Outback

TLAPS 7422446945968 For 2015-2019 Subaru Legacy / 2010-2013 Outback Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2015-2019 Subaru Legacy All Models, 2010-2013 Subaru Outback All Models ( Drilling Is Required ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 4000 lbs, Tongue Weight - 600 lbs, Weight Distribution - N/A, Weight Distribution Tongue Weight - N/A.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

Subaru 2020 Outback Thule Hitch Mounted Bike Carrier 4 Bikes SOA567B051 Genuine

  • Genuine Subaru Bike Carrier Hitch Mounted (4 Bikes) SOA567B051.
  • Manufactured by Thule FOR SUBARU, this aluminum rack is designed for easy handling, installation and removal..
  • The anti sway cages prevent bike-to-bike and bike-to-vehicle contact and help absorb road shock for frame protection. The carrier is unique to Subaru and designed to properly attach to the 2" Subaru Genuine Trailer Hitch only. Arms fold down and tongue assembly folds up when not in use for easy storage. Rack pivots backwards for access to rear of vehicle. Integrated locking cable and locking hitch pin lock the bikes to the carrier and carrier to the vehicle..
  • To avoid blocking taillights, use only roof mounted bike carriers to transport bikes with solid disc wheels. Before installing this carrier, please check the laws of your state regarding license plate visibility..
Check Stock

RED WOLF Replacement for Subaru Forester/Outback/Crosstrek 2009-2020 to Add Subaru Trailer 4-Pin Trailer Wiring Harness Connector 4 Way Flat Trailer Extension Plug

  • For Subaru Forester 2009-2020, 2010-2020 Subaru Outback/Wagon/Except Sport, 2013-2015 Subaru XV Crosstrek/Except Hybrid, 2016-2019 Subaru Crosstrek/Except Hybrid models..
  • The subaru 4 pin trailer harness allow to add a trailer/ hitch or solve the issue with lighting on trailer. Totally 6.6 ft wire harness to meed the need when you hook them up..
  • No cutting or splicing factory wire. What's more, the fuse was set out side the harness so that if we needed to change the fuse we could do it without having to remove the trim..
  • Easy install: The subaru trailer 4 way harness is directly plug the white connector into the existing factory harness . Attaching the ground screw and locating the adapter box wherever you feel it would be out of the way..
  • Anti- dust & rain. 4 way flat subaru trailer connector comes with dust cap that protect the 4pin metal from dust or water to prevent go rust. High quality material make, durable use, as you can see at advertising pictures..
Check Stock

CURT 12290 Class 2 Trailer Hitch, 1-1/4-Inch Receiver, Compatible with Select Subaru Legacy, Outback

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch package is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 2 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this automotive tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch fits select model years of the Subaru Legacy and Outback.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock

CURT 99308 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Subaru Outback

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Subaru Outback..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Curt 13410 22272 Class 3 Trailer Hitch with 2 Inch Receiver and 2 Inch Rubber Hitch Tube Cover Bundle for 10-19 Subaru Outback

  • Kit Contains: (Part Number: 13410): Class 3 Trailer Hitch // (Part Number: 22272): Rubber Hitch Tube Cover.
  • Class 3 Trailer Hitch Details: (Part Number: 13410): Rated to 4,000 lbs. gross trailer weight and 600 lbs. tongue weight // Engineered with a vehicle-specific design for a custom fit // Tested for safety in accordance with SAE J684 // Precisely welded for superior strength and fit // Protected by a durable high-gloss black powder coat finish.
  • Class 3 Trailer Hitch Details: (Part Number: 13410): Co-cured in a rust-resistant liquid Bonderite coating, inside and out // Equipped with an open-back receiver for easy cleaning // Limited lifetime warranty (one-year finish, one-year parts) // NOTES: Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities // Includes installation hardware.
  • Rubber Hitch Tube Cover Details: (Part Number: 22272): Protects 2" x 2" receiver tube opening when not in use // Adds a clean, finished look and keeps debris out // Friction fit does not require a pin and clip to hold in place // Constructed from quality black rubber // Limited Lifetime Warranty (One-Year Finish, One-Year Parts).
Check Stock

CURT 13390 Class 3 Trailer Hitch, 2-Inch Receiver, Exposed Main Body, Fits Select Subaru Legacy, Outback

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4,000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component). Material-Carbon Steel. Drilling Required.
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Subaru Legacy and Outback.
  • Gross trailer weights (GTW) and tongue weights (TW) vary by application.
  • Limited lifetime warranty to original purchaser.
Check Stock

Subaru Bike Rack Forester Ascent Crosstrek Outback Hitch Bike Carrier OEM New Thule OEM SOA567B041

  • Genuine Subaru Bike Carrier Hitch Mounted (2 Bikes) SOA567B041.
  • Manufactured by Thule, this lightweight aluminum rack is nearly half the weight of most hitch racks, for easy handling, installation and removal. The anti sway cages prevent bike-to-bike and bike-to-vehicle contact and help absorb road shock for frame protection.
  • Arms fold down when not in use, and rack pivots backwards for rear of vehicle access. Integrated locking cable and locking hitch pin lock the bike to the carrier and carrier to the vehicle.
  • To avoid blocking taillights, use only roof mounted bike carriers to transport bikes with solid disc wheels. Before installing this carrier, please check the laws of your state regarding license plate visibility..
  • 2019 2020 Ascent (requires SOA567H010 2" ADAPTER SOLD SEPARATELY IN OUR AMAZON STORE) 2019 Crosstrek 2019 Forester 2019 Outback 2020 OUTBACK REQUIRES ADAPTER.
Check Stock

CURT 11465 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Subaru Impreza

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Subaru Impreza.
  • TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead.
Check Stock

CURT 13409 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Subaru Forester

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Subaru Forester. Material - Carbon Steel.
Check Stock

CURT 13135 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Subaru Crosstrek, XV

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Subaru Crosstrek and XV Crosstrek.
Check Stock

CURT 13448 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Subaru Ascent , Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 750 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 750 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Subaru Ascent.
Check Stock

CURT 13382 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Subaru Crosstrek GLOSS BLACK POWDER COAT

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Main Body:Square.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Subaru Crosstrek.
Check Stock