Reviews Trailer Hitch Bumper Guards

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

REYSUN Trailer Hitch 863803 RV Bumper Hitch Receiver Adapter 2 inch Receiver Fits 4 inch Square RV Rear Bumpers Hitch Pin Kit Included

  • This RV bumper hitch fits 4 inch x 4 inch RV or travel trailer bumper, use for both downside and upside.
  • The RV bumper hitch adapter accepts hitch mount of 2 inch receiver shank such as bike racks, RV tire carriers, cargo carriers or other accessories, could offer a low hitch mount to provide RV trailer towing.
  • Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for towing purposes.
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this trailer hitch more durable.
  • ECORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

Shocker Air Hitch with Combo Ball Mount (2' & 2-5/16' Balls), Fits 2' Hitch - 12,000 lbs

  • The Shocker Air Hitch has a capacity of 12,000 lbs of towing, 1,200 lbs tongue weight. Fits into bumper receiver hitch. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control. Easy to attached and adjust. 5lbs of air pressure per 100 lbs on tongue weight.
  • 7 Adjustment Holes - 1/2" to 3-1/2" drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip ball mount around when pulling trailers with different coupler ball sizes..
  • Add Instant Air Ride to your Pickup & Trailer. Smoother Safer Towing - Takes the Jerks, Bumps and Thumps away from your vehicles & your trailer. built-in air bag for a smoother towing experience. Featuring a built in height adjustment plus weight adjustable. Just add or ride air depending on the weight of your trailer and it's contents..
  • Built in airbag cushions your trailer towing for a smoother tow. Works great on compact, midsize and full size pickup trucks along with vans and select SUV's when the receiver tube is mounted under the bumper.
  • Choose 2" or 2-1/2". Includes complete Shocker air bumper hitch base frame assembly with built in airbag, adjustable combo ball mount (2" & 2-5/16" ball) along with 2 D-handle ball mount pins & clips. Made in the USA by Shocker Hitch.
Check Stock

OEDRO Rear Bumper Compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors), Full Width Back Bumper w/ D-Rings & Hitch Receiver & Reflective Armor

  • 【Perfect Fitment】OEDRO rear bumper combo is compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors) all models.Rear parking sensor, require self-drilling..
  • 【Separated Trailer Hitch】Unlike other rear bumpers, this bumper designed with separated trailer hitch. You can reuse the factory trailer hitch or select higher grade hitch. Special harness plug notch for easy and clean wire routing..
  • 【Stainless Steel Trim Panel】The original silver trim panel can reflect lights, adding extra safety during the night. Or it can be easily removed for customized painting, matching the body color or individuation decal..
  • 【Functional Step Bumper】This back bumper has enough space for a spare tire up to a 32-inch one. Also, it will serve both as a guardrail and anti-slip step pad..
  • 【Tactical 67" Full Length Bumper】Adding an aggressive style to the rear of your Jeep with protection from all the hazards of driving a Jeep the way it was meant to. Hit the trails with confidence and with a bold new look..
Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

Megadream Xbox One Wireless Chatpad Keyboard with 3.5mm Audio Jack for Xbox One/One S/One X, Xbox Series S/X, Xbox One Elite/Elite 2, PC – 2.4G USB Receiver & Charge Cable included

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-inch receiver and accepts a 1-1/4-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 4 inches of extra length to your hitch receiver. This provides additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver. It also accepts any industry-standard 1-1/4-inch x 1-1/4-inch shank.
  • SOLID STRENGTH. This hitch receiver adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

RV Bumper Hitch Receiver 2 inch Adapter Receiver Fits for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!.
  • VERSATILE DESIGN:The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware..
Check Stock

Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver with Hitch Pin & Hitch Cover

  • ...rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go..
  • Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time..
  • Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation..
  • 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use..
Check Stock

CURT 45791 8-Inch Long Trailer Hitch Extension for 2-Inch Receiver 3,500 lbs black

  • ADDED CLEARANCE. This trailer hitch extension adds 8 inches of extra length to your hitch receiver, providing additional clearance between your bumper....
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated....
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch....
Check Stock

WEISHUJI RC Rear Bumper, RC Metal Rear Bumper, Metal Rear Bumper with 2 Shackles/Trailer Hitch, Metal Rear Bumper with D-Rings Fit for TRX4 1/10th RC Crawler Car

  • RC Rear Bumper is suitable for TRX4 1/10th RC Crawler Car..
  • RC Rear Bumper is good for protecting your chassis when you flip over as the bumper is pointed outwards..
  • RC Rear Bumper is made from high quality materials and Metal Rear Bumper with 2 Shackles/Trailer Hitch are designed for long-lasting performance..
  • RC Rear Bumper is good in durability and corrosion resistance, Metal Rear Bumper with D-Rings Fit presents great looks..
  • Package of RC Rear Bumper includes: 1X RC Metal Rear Bumper 2X Red Shackles 1X Trailer Hitch.
Check Stock

Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin & Hitch Cover, Openning 3500 LBS Capacity Fits 4" x 4" Bumper Trailer Towing Cargo Carrier Bike Racks

  • ... Sturdy & Durable: Pulls its weight, every time! Tough and durable for the long haul, this hitch receiver is constructed of premium steel. With a dual coating finish of E-coat and Black Powder Coating, this bumper hitch is protected from rust and corrosion. Get the job done right with the Ohuhu Trailer Receiver!.
  • Use Only For 2"*2" Square Tubes: Designed specifically for 4"*4" bumpers, this receiver is made for use with 2"*2" square tubes. It can allow for a wide variety of towing options..
  • 350lbs Tongue Weight Capacity: This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)..
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use..
Check Stock