Reviews Towing Trailer

Shocker Air Equalizer & Weight Distribution Hitch with Sway Control Arm Kit, Fits 2" Hitch 5" Rise 4" Drop

  • Smoother Safer Towing: Add instant air ride towing to your pickup & camper trailer with a equalizer, weight-distribution hitch & sway control kit. Absorbs Road Shock: Air equalizer absorbs the road shock & cushions the ride when towing a camper with a weight-distribution hitch. Weight Distribution Hitch: Evenly distributes the weight over the axles of tow your vehicle and trailer to add stability and control..
  • Eliminates Trailer Sway: Dual friction sway bars stiffen the connection between truck & trailer. Adjust & fine-tune your towing experience. Help reduce any sway from wind or road conditions. For 2-5/16" Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? Comes with 2-5/16" hitch ball. (2" ball not included) Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring..
  • Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7" or 9" of Adjustment (5" of rise to 2" drop or choose 5" rise to 4" drop). Fine tune for your towing weight. Just add air for heavier loads. ....
Check Stock

CURT 13704 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 5,000 lbs., Fits Frames up to 66 Inches Wide

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer.
  • EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.
Check Stock

CURT 45154 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-In Receiver, 7,500 lbs, 4-Inch Drop

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 4-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45134 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-In Receiver, 7,500 lbs, 2\ Drop , black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

Shocker 20K Impact Max Cushion Hitch Combo Ball & Sway Control Towing Kit, Fits 2\ Hitch 2 Sway Arms

  • Sway Control Kit: Cushions road shock & reduces trailer sway for a smooth, safe, and straight towing experience. Dual Cushion Design: Built in dual rubber bump cushions. Shock Absorbing: Dual bump cushion design absorbs road shock. Great for HD towing..
  • Sway Tab Combo Ball Mount: 1 piece construction with 2" and 2-5/16" trailer hitch ball with welded sway tabs. Friction Sway Control Bar Kit Options: Order with 1 Sway Arm Kit for use with Trailer up to 10K lbs. Order with 2 Sway Arm Kits for use with Trailers over 10K lbs. Great for reducing trailer sway: Use 1 system for trailers under 10K and 2 systems for trailers over 10K. Adjustable Friction Bar: Can be adjusted to fine-tune your towing experience..
  • 20,000 lbs Heavy Duty Capacity: 20,000 lbs towing capacity and a 2,000 lbs tongue weight. (can vary by mount) Combo Ball Mount Tow Rating: 2" ball rated at 16,000 lbs & 2-5/16" ball rated at 8,000 lbs. Max Black Textured Finish: Impact resistant super durable textured matte black powder coated finish of base frame..
  • Includes complete adjustable Shocker impact max cushion hitch base frame assembly, combo dual ball mount with 2" & 2-5/16" hitch balls & 2 sway bar tabs, 2 ball mount pins & one or two friction sway control arm kits. 10+ Ball Mount Option....
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 99308 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Subaru Outback

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Subaru Outback..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2014-2016 Toyota Highlander - 13200 & 56217

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Toyota Highlander..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Curt 13068 55336 Class 3 Trailer Hitch and Wiring Kit for Honda Odyssey

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

Shocker HD Air Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Chevy Silverado / GMC Sierra 2500 3500 (2015-2023), Fits 2-1/2\ Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 16,000 gtw & 1,600 tw for 2-5/16 ball and 8,000 gtw for 2" ball.Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck ....
Check Stock

CURT 99310 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Honda Pilot

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Honda Pilot..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock