Reviews Torsion Hinges

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

BTSHUB Torsion Bar Unloading Tool Key Removal Compatible with GM Chevy Ford Dodge Drop Forged Heavy Duty

  • 【Torsion Key Tool】7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars.
  • 【Forged steel construction】Torsion bar unloading tool was made for use on trucks with heavy duty chassis and a larger torsion bar.
  • 【High Performance】 Designed to hold the torsion bar while you make adjustments to your vehicle.
  • 【Advantage】Torsion key unloading tool can be positioned on the frame and the torsion bar mount.
  • 【Applications】 Torsion Bar Unloading Tool Key is Compatible with GM.
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (120 lb.)

  • ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.
  • ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
  • ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones.
  • ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.
  • ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

Makita E-01644 Impact XPS 60 Piece Impact Bit Set

  • Bits last up to 90X longer than standard impact bits.
  • Bits feature precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-00913 Impact XPS #2 Phillips 2 Power Bit 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit....
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-01024 Impact XPS #8 Slotted 2\ Power Bit, 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-00577 Impact XPS™ #1 Square 1\ Insert Bit, 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-00614 Impact XPS™ T15 Torx 1' Insert Bit, 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

Makita E-00979 Impact XPS T15 Torx 2' Power Bit, 5/pk

  • Precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel, combine to deliver improved overall performance and bit life.
  • Lasts up to 90X longer than standard impact bits.
  • Precision machined tips provide a superior full contact fit for improved holding power and longer life.
  • Pulse Torsion Rings help to disperse impact energy through the torsion zone and off of the bit tip.
  • Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life.
Check Stock

OMT Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

Orion Motor Tech Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

YC-305P1 Air Screwdriver Pistol Grip Reversible Pnuematic Screwdriver Multi Function Adjustable Torsion 40N-m Pneumatic Equipment Tool(American Style)

  • ☛【AIR SCREWDRIVER】-- Advanced technology and accurate manufacturing, with strict quality control and quality assurance.
  • ☛【STRONG TORSION】-- Item Type: Air Screwdriver. Using double hammer structure, with strong torsion, efficient and easy work.
  • ☛【ADJUSTABLE TORSION】-- Seesaw CW and CCW switch, torsion adjustment and more convenient operation. No-Load Speed: 12500rpm.
  • ☛【MAIN APPLICATION】-- Used to tighten and loosen screws and nuts, etc., suitable for furniture assembly, electromechanical assembly, door and window production, etc..
  • ☛【COMPLETE TOOLS】-- Maximum Torsion: 40N-m. Complete tools, you can operate it yourself, suitable for DIY enthusiasts.
Check Stock