Reviews Torque Test Stand

Stanley Proto J6472 3/8-Inch Drive Electronic Torque Tester, 25-250-Inch Pound

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
  • Broad accuracy range extends from 10% to 100% of full scale.
  • Three units of measure are available ft-lb, in-lb, and Nm.
  • Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
Check Stock

TEKTON 1/2 Inch Drive Split Beam Torque Wrench (40-250 ft.-lb.) | TRQ62203

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 40-250 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

TEKTON 3/8 Inch Drive Split Beam Torque Wrench (20-100 ft.-lb.) | TRQ62103

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 20-100 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

Huanyu HP-20 Digital Torque Meter Tersion Meter Screw driver Wrench Measure Tester Torque Settings Equipment for Torque testing With Calibration Certificate

  • [THREE Units]: The force sensor head is fast and accurate, and the machine can easily switch between kgf. cm: 0.30-20.00, 1bf.in: 0.30-18.00, and N.m: 0.030-2.000. The maximum torque, minimum torque, and average torque can be confirmed..
  • [TWO Modes]: There are optional switches for peak and tracking modes. Equipped with a reset button for easy observation and recording, and the peak hold function ensures stable work..
  • [Safety & Stability]: Automatic charging control, and two hexagonal foot fixing screws are provided to ensure the stability of the desktop..
  • [Unique body]: LCD high-definition display, metal body, sturdy mounting fixture knob, making the machine more durable and easy to operate..
  • [Use]: Mainly used to measure and test the torque of various electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches.
  • to correct the torque of electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches, and torque caps to meet the needs.
  • It can measure the torque of other tools, such as various fixing devices..
Check Stock

Large Torque 1 inch Pneumatic Impact Wrench - Heavy Duty Torque Output, High Precision, Accessibility, Control

  • 1. [Two units]: The force sensor head is fast and accurate, and the machine can easily switch between kgf.cm: 5.0-250.0 and N.m: 0.50-25.00..
  • 2. [Three Modes]: There are three optional switches for peak, tracking, and F.PEAK modes. Equipped with a reset button for easy observation and recording, and the peak hold function ensures stable work..
  • 3.[Safety and stability]: Automatic charging control, and two hexagonal foot fixing screws are provided to ensure the stability of the desktop..
  • 4.[Unique body]: LCD high-definition display, metal body, high-quality mechanical buttons, making the machine more durable and easy to operate..
  • 5.[Use]: Mainly used to measure and test the torque of various electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches.
  • to correct the torque of electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches, and torque caps to meet the needs.
  • It can measure the torque of other tools, such as various fixing devices..
Check Stock

Huanyu Digital Torque Meter HP-100 Torque Gauge Portable Torsion Meter Screw Driver Wrench Measure Tester Torque Testing Instrument Torque Adapter Dynamometer With Calibration Certificate

  • 1.[Three units]: The force sensor head is fast and accurate, and the machine can easily operate *[kgf.cm : 0.5-100.0]*, *[lbf.in : 0.5-90.0]*, *[N.m : 0.05-10.00]* Switch between. The accuracy (positive and negative tolerance) is: ±1%. The resolutions (the smallest increments displayed on the screen) are: 0.1 kgf.cm, 0.1 lbf.in, and 0.01 N.m..
  • 2.[Two Modes]:There are optional switches for peak and tracking modes. There is a reset button for easy observation and recording, and the peak hold function ensures stable work..
  • 3.[Safety and stability]: Automatic charging control, and two hexagonal foot fixing screws are provided to ensure the stability of the desktop..
  • 4.[Unique body]: LCD high-definition display, metal body, high-quality mechanical buttons, making the machine more durable and easy to operate..
  • 5.[Use]: Mainly used to measure and test the torque of various electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches.
  • to correct the torque of electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches, and torque caps to meet the needs.
  • It can measure the torque of other tools, such as various fixing devices..
Check Stock

Festool 576490 TID 18 Impact Driver and PDC 18 Drill Driver 4.0Ah Combo Kit

  • A tool that will stand the test of time..
  • With its highly powerful new generation brushless EC-TEC motor and exceptionally robust hammer mechanism, the TID 18 is ready for unlimited, long lasting use..
  • The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three speed settings. The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed..
  • The perfect ergonomics, compact design and low machine weight of just 2.12 pounds ensures excellent handling all round including when used for long periods or overhead jobs. The IMPACT principle means that the TID 18 operates without back torque and only turns the screw, so your wrist is protected from twisting..
Check Stock

Corwin KW308 Rivet Nut Drill Adaptor M3 M4 M5 M6 M8 Thread Insert Gun Attachment Tool (Metric)

  • Operation 1, Choose proper size mandrel to set nuts on workpiece.
  • 2, Test some nuts before application to get proper torque setting(your drill must feature clutch and torque setting to avoide over loading).
  • 3, Hold steady--right drive to press the nuts and stop when nuts grip tight enough--left drive to withdraw mandrel.
  • Tips: 1, choose as big size as possible since small size mandrel and thread are thin and easily stripping. 2, mandrels are wearing parts, and we provide replacement mandrel for further purchase.3, You can also us torque spanner to set nut if you don't have torque setting drill..
  • 4, For M6 UP nuts we strongly advice to use cordless screwdriver to set since it perfectly killed twisting force on your holding hand and largely increase efficiency..
Check Stock

GEARWRENCH 1/2\ Drive Tire Shop Micrometer Torque Wrench 30-250 ft/lbs. - 85088, Black

  • Specifically for checking wheel lug nuts to manufacturer recommended torque value.
  • Wrench design helps prevent the warping of brake rotors caused by over torqueing.
  • “Tire Tread” rubber cover on the head, lock ring and handle provides a cushioning effect to reduce fatigue and tool damage.
  • Torque accuracy of +/- 3% CW between 20% and 100% of wrench capability.
  • Calibrated on test equipment to meet ISO 6789 specifications and accuracy requirements of ASME B107. 300-2010.
  • 32-tooth ratchet mechanism with an 11° swing arc lets you turn fasteners in hard-to-reach places.
  • Pull adjustment collar feature allows you to make quick and easy torque setting changes.
  • Scale markings are highly visible and easy to read.
Check Stock

PRO BIKE TOOL 3/8 Inch Drive Click Torque Wrench Set 10 to 60 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes, Motorcycle Multitool - Includes 1/2" & 1/4" Adapters, Extension Bar & Storage Box

  • Precision Torque Measurement – High Torque Settings - Install components with calibrated precision - 10.0 to 60.0 Newton Meter (88 to 530 inch pounds) torque range with micro adjustment to 0.5 Nm. Designed for higher torque setting repairs and installations including: bottom bracket, cassettes, cassette lock ring, crank - sets, bolts & arms, pedals and disc brake rotors..
  • Peace Of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 3/8-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise). Torque wrench length: 27.7cm/10.9", width: 3.1cm/1.22.
  • Safe & Easy To Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that c....
Check Stock

Steadfast Carbon Fiber Driver Shaft - Carbon Fiber Golf Shaft with Standard 45.5" Play Length - 4 Flex Choices - Adapter Included - Installed Professional Club Fitting Team (Stiff, PXG)

  • LONGEST AND STRAIGHT BALL FLIGHT : According to Independent Testing by reputable 3rd party testing company Golf Labs, Steadfast is the Straightest shaft in golf with the least amount of dispersion. Hitting a straighter ball requires low shaft torque, we designed the new Steadfast shafts with torque and balance as the number one priority, leading to the best feeling and most stable shafts on the market..
  • REFINED GRAPHITE : Graphite shafts tend to be brittle and do not stand the test of time, Steadfast is constructed using the highest quality carbon fiber which is the pure form of graphite providing more durability and better overall feel..
  • FITS WITH EASE : Our premium carbon fiber shafts are also easy to setup and attach, simply prepare the tip and attach the corresponding adapter to the club head and immediately start gaining distance and confidence while reducing dispersion..
  • OPTIMIZED THROUGH TESTING : Our shafts are engineered and tested individually by flex, meaning each flex is a completely different formula that has been optimized with 100’s o....
Check Stock

BAOSHISHAN Force Gauge Stand Push Pull Force Test Stand Manual Test Stand Vertical Spiral Type Stroke 220mm with 2 x HJJ-001 Clamp (APH Test Stand)

  • [PARAMETERS] -- Model: APH Push Pull Test Stand | Stroke: 220mm | Net weight: 5kg | Dimension: 490mm*210mm*140mm | ONE YEAR warranty and professional technical support.
  • [WITH HJJ-001 CLAMP] -- Each Force Test Stand comes with 2 HJJ-001 clamps, which can be installed on the digital force gauge for tensile testing. Screws and wrenches for installation are also included in the package..
  • [FOR PUSH PULL TEST] -- The tension test stand is specially equipped for DL, ZP series of push pull force gauge (not included), which can be combined to a test instrument for different purposes of tests..
  • [APPLICATION] -- The manual test stand is widely used in rubber and plastics, light industry, textiles, building doors and windows, composite materials, wire and cable industries, and tensile experiments..
  • [CUSTOMIZABLE] -- If you need a longer stroke test stand, please contact us for customization. The custom time is generally 4-5 working days, and our shop provides a one-year warranty..
Check Stock

PRO BIKE TOOL 1/4 Inch Drive Click Torque Wrench Set – 2 to 20 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box

  • Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
  • Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
  • Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set to....
Check Stock