Reviews Torque Cam For M107

Andrews Cam .495 Lift EV27 Grind for Harley/For Harley EVO Big Twin

  • Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit..
  • Bolt-in street cam with fast open and close ramps.
  • Similar in timing to EV3 but designed to produce a very broad torque band.
  • Excellent cam for full dress touring bikes.
Check Stock

Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'

  • Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
  • SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
  • SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Check Stock

APDTY 141864 Cam Camshaft Phaser 4.6L 5.4L Lock Out Timing Bypas Kit w/Bolts

  • Stops Clicking Sounds By Locking The Cam Phasers In Place On 4.6L or 5.4L V8 Engines.
  • This Kit Bypasses The Normal Cam Phaser Operation Which Helps Optimize Engine Timing.
  • This Is Not Meant As A Permanent Solution, The Check Engine Light Will Illuminate After Installing.
  • Includes Locking Spacers & 2 New TTY Torque To Yield Bolts.
  • Replaces 3L3Z-6279-DA, 3L3Z6279DA On 3R2Z-6A257-DA Cam Phaser.
Check Stock

Precisebuilt 1/2\ Drive 15-150 ft-lb (30.5-214 Nm) Dual-Direction Click Professional Torque Wrench

  • Precise, Dual-Direction Operation - Tested for +/-2% in-factory calibration and accurate up to +/-4% clockwise and +/-6% counterclockwise. Meets ASME B107.300 standards and comes with a calibration certificate..
  • Easier & Quicker Torque Adjustment - The unique internal design makes our torque wrench light and easier to use. The patented locking collar prevents accidental torque changes as you work..
  • Get the Right Torque Specs Every Time - The heavy-duty cam and pawl mechanism makes this great for precision work. A clearly engraved dual-range scale on the shaft and a click system prevents over-tightening..
  • Made For Toughness & Safety - The shaft is made from nickel chrome-plated alloy steel and fitted with a high-grade steel spring. The comfortable ergonomic handle allows for excellent grip and control..
  • For Professionals & DIYers - Suitable for machine installation, as well as car, truck, or bike maintenance. This certified torque wrench comes with a durable blow-molded case for storage and transport..
Check Stock

NEW PITTSBURGH PRO 1/2' DRIVE CLICK TYPE TORQUE WRENCH WITH HARD CASE

  • 1/2 in. torque wrench provides a range from 20-150 ft. lbs.
Check Stock

Cam Sprocket Locking Tool Fit for Harley 2017-UP Milwaukee 8(M8) Engine Model Touring Model 2018-UP Harley Softail

  • Fitment： M8 Locking Tool fits for Harley 2017-UP MILWAUKEE 8(M8) Engine..
  • Function: M8 cam Locking Tool can allows you to easily lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts..
  • Material: M8 Locking Tool made from urethane elastomer with high tear and impact properties..
  • Tips: The side with the notch faces down toward the crank gear. It’s a tight fiting, you will need to move the upper sprocket slightly until it matches up. Helps make the cam change very simple..
Check Stock

CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds, 1/4-Inch

  • Adjustable Models Offer Versatility For Applications That Require More Than One Torque Value.
  • These Torque Screwdrivers Are Particularly Suited For The Electronics Industry And For Instrument Assembly Work.
  • A Simple, Cam Over Design Prevents Over-tightening And Possible Damage To Components.
Check Stock

Makita B-60523 Impact Gold #2 Phillips 2″ Power Bit, 15/Pk

  • Designed exclusively for high-torque impact drivers.
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit to flex under load, taking pressure off of the bit tip for increased durability in high torque applications.
  • Precision-fit tip engineered to prevent “cam-out” And stripping.
  • High-quality steel engineered for use with impact drivers.
  • Ideal for driving screws in a wide variety of heavy-duty fastening applications including deck building, framing and installing plywood subfloor.
Check Stock

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock

Stainless Steel Panel Screw, Plain Finish, Fillister Head, Slotted Drive, 3/4\ Length, #2-56 Threads (Pack of 10)

  • Used for equipment panels when hardware is subject to loss.
  • Stainless Steel is suitable where formability and cost are important considerations.
  • Fillister head for high torque and good hold-down strength.
  • Phillips drive is designed to cam out under too much torque.
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.
Check Stock

Stainless Steel Panel Screw, Plain Finish, Fillister Head, Slotted Drive, 1/4\ Length, #4-40 Threads (Pack of 10)

  • Used for equipment panels when hardware is subject to loss.
  • Stainless Steel is suitable where formability and cost are important considerations.
  • Fillister head for high torque and good hold-down strength.
  • Phillips drive is designed to cam out under too much torque.
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads.
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • ...V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty..
Check Stock