Reviews Topside Paint 2

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Dolphin Premium Marine Topside Boat Paint | Gallon | Fiberglass, Wood, Metal, Aluminum | Easy to Apply & Long Lasting (Black, Gallon)

  • ✅ MARINE TOPSIDE PAINT FOR BOATS: For use above the waterline on fiberglass, wood, metal, aluminum, gelcoat and previously painted surfaces in good condition. Choose from a variety of popular color choices..
  • ✅ EASY TO APPLY: Professional results by simply brushing, rolling or spraying. Apply 2 thin coats on a prepared surface. Don't paint in direct sunlight and allow each coat to dry overnight..
  • ✅ USED FOR VARIOUS MARINE APPLICATIONS: Commonly used on primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, bridges, tanks, offshore oil rigs and other structures..
  • ✅ HIGH GLOSS LONG-LASTING FINISH: This marine structure and boat paint is scratch & chemical resistant and stands up to salt water, oil, gasoline, repeated washings for a long-lasting finish..
  • ✅ AVAILABLE IN MANY COLORS: Our topside paint is available in a variety of colors. Dolphin Boat Paints also sells boat primer, paint thinner and boat non-slip grip paint..
Check Stock

Interlux Y404KIT/1 Epoxy Primekote - White, Gallon

  • Suitable under all Interlux topside finishes.
  • Used to re-surface cracked and crazed gelcoat prior to the application of topside paint.
  • Can be used over clear epoxies as a sanding surfacer and to eliminate the effects of amine blush.
Check Stock

Wayside Pond

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

TotalBoat-365388 - Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Black, Quart)

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Flat Black, Quart)

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Sea Foam, Quart)

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Sea Foam, Gallon)

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat Wet Edge Marine Topside Paint for Boats Fiberglass and Wood Blue-Glo White Gallon

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat-430786 Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Classic Whaler Blue, 1 Quarts (Pack of 1))

  • DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention.
  • EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method).
  • SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean.
  • ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim.
  • VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces.
  • not for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
  • CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals).
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

Otherkin Tarot

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock