Reviews Top Drive Drilling Machine

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed:i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron:φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

Bosch TCHC9 SDS-plus® Universal Concrete Screw Installation 9 pc. Kit

  • Fast-drilling Bulldog SDS-plus bit design – with a carbide tip, brazing process and centric tip for rapid rotary concrete drilling.
  • Bosch-made carbide tip – deliver outstanding durability under heavy loads.
  • Upgraded flute design – aggressively pulls dust away from hole, for faster and cooler drilling.
  • Centric conical tip – ideal for drilling anchoring holes, the centering tip provides precise starts.
  • Hex drive on bit fits into driver sleeve – features a 1/4 In. hex shoulder for a drive sleeve used to set masonry screws.
Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
  • 【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock

YUCHENGTECH Upgrade Mini Woodworking Table Saw DIY Handmade Woodworking Bench Lathe Cutting Drilling Bench Lathe Machine Multifunctional Wood Working Bench (110V)

  • 1. 【One machine with multiple usages】◈The left of the mini table saw can cutting,the right can drilling , and the drill chuck of the middle machine replacement with different accessories,with grinding, polishing, carving functions, can meet different work requirements..
  • 2.【Accurate drilling】◈The right drilling device of the mini table saw can strongly hold the drilling material, and the hole can be drilled by moving the push rod,which improves the accuracy of drilling and reduce the drilling deviation..
  • 3. 【Protective cover】◈The top of the saw blade is designed with a protective cover. When cutting, pull it up and put it down after use to avoid scratches of the saw blade. It does not affect the operation and ensures the safety of the work..
  • 4. 【Adjustable backer】◈The backer can be adjusted according to the width of the cutting material, which makes the cutting work more convenient and quicker and improves the cutting efficiency..
  • 5.【Application】◈Mini table saw is suitable for wood carving, nuclear carving, bodhi seed and other wood DIY processing, and can also be used for jade and amber DIY processing. It is a good helper for woodworking DIY workers..
Check Stock

Machining and Grinding Fluid | Fusion Cool 2240 | General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Semisynthetic 1 Gallon

  • Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning..
  • Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications..
  • Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520.
  • Environmental friendly, recyclable coolant.
Check Stock

LIONMAX Wood Screws #8 x 2 Inch, Pocket Hole Screws 300PCS with Coarse Thread, Washer Head Square Drive, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 2 Inch Pocket Hole Screws 300 Pieces, 150MM Square Drive Bit Included..
Check Stock

LIONMAX Pocket Screws #8 x 1 Inch, Wood Screws Coarse Thread 600PCS, Washer Head Square Drive Screws for Pocket Hole, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 1 Inch Pocket Hole Screws 600 Pieces, 150MM Square Drive Bit Included..
Check Stock

Ryobi Corded Power Drill 5.5 Amp 3/8 Inch 1,600 RPM Variable Speed Trigger Renewed

  • TWO DRILLING MODES: Switch between hammer mode (for masonry up to 5/8" capacity) and drilling mode (with the ability to tackle wood, plastic, or up to....
  • KEYED CHUCK STORAGE: The heavy duty chuck is tightened with a key, stored on an included lanyard. This will make sure that the key isn’t too far....
  • RUBBER OVERMOLD: Maintain a comfortable grip with the rubber molding over the pistol grip. This gives you maximum control, even in slippery....
  • AUXILIARY HANDLE: this will help you when you have the tool set to hammer mode. This will give you leverage and extra downward force to drive deep....
  • DEPTH STOP ROD: Plan out exactly how deep you want your holes to be bored with the help of the rod on top of the drill..
Check Stock

Archer PRO 4\ in. Diamond Turbo Core Drill Bits for Concrete Drilling

  • ✔Size --1pc 1 3/8 inch core drill bit (35mm) ,diamond height 10mm, total length 100mm,diamond grit #25/35,working length 80mm,5/8-11 thread of the granite drill bit.
  • ✔Wide Application --Diamond drill bit are worked great for dry drilling holes through Granite Marble Hard Stone Reinforced Concrete Brick Block Counter Top,Using water could prolong the lifetime.
  • ✔Super Quality Raw Material --Using laser welded technology,improve the performance of segments,avoid segments off during drilling process.The vacuum brazing protective layer on the surface of the core steel offers clean cut & steel core protection.
  • ✔Fast and Smooth Drilling --Creates a fast and stable drilling, you could drill smoothly with no broken edges.
  • ✔Machine --angle grinder (Pay Attention! If you drill through thick granite ,we recommend you to add enough water to help cooling the bits,which could prolong the lifetime).
Check Stock

Imdinnogo 2Kit GT2 Synchronous Pulley Wheel 20&60 Teeth 5mm Bore Aluminum Timing Pulley Belt Closed Timing Belt Length 7.87inch Width 6mm for 3D Printer (60T-5mm-6)

  • Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions..
  • Works closely with the synchronous belt for more smoothly transition and more stable drive. Suitable for linear motion and positioning..
  • Inner Bore Diameter: 5mm. Screw Mounting Hole: M4..
  • Material: high quality 7075 aviation aluminum, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
  • Package includes: 2 kt closed belt with pully wheel..
Check Stock

Deck Plus 48414 Wood Screws #8 x 2 Tan 5lb Box

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • TAN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
Check Stock

Deck Plus 48419 Wood Screws #10 x 3 Tan 5lb Box

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • TAN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
Check Stock

The Book of Five Rings

  • 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check Stock