Reviews Tool Post

Bxa 250-222 Tool Post Set QC Wedge Type Quick Change Turning and Facing Holders for Lathe Swing 10 -15 8

  • The wedge type tool post set is made of steel, which is firm and durable, not easy to wear and prolong the service life.
  • The quick change tool post set is precisely designed and finely ground to ensure repeatability and precision.
  • Quick change tool holder set is hardened, with high hardness and rigidity, so it is not easy to vibrate during processing.
  • The wedge type tool post set is the main accessory of an ordinary lathe, and different tool holders can be selected according to the processing requirements.
  • Including: 250-222, 250-201, 250-202, 250-204, 250-207, 250-210, 2 x 250-201T tool holder.
Check Stock

Bumlon Bike Multifunction Tools

  • 【Front sight adjust tool】 Front sight adjust tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) very well, which made solid steel construction. Makes adjusting front sight post quick and easy..
  • 【Double ended adjust tool】 Double ended adjust elevation ( 4 prong/5 prong ) front post adjusting tool for adjustment of 5-Prong A1 or 4-Prong front sights..
  • 【Steel part】One-piece precision machining steel part.Front sight adjustment tool to push down and adjust the front post faster and easier to adjust the sight..
  • 【Patterned surface 】Easy to hold due to the patterned textured grip surface,precision machined steel part and friendly use..
  • 【Precise adjustment】 Easy precision elevation adjustments for standard 4-Prong and 5-Prong front posts enhancing shooting accuracy.Note: since the product is mass-produced, there will be a little flaw on the surface and inside of the product. If you are more concerned about this, please buy carefully.In addition, the size of the product has been marked on the picture. Please pay attention to the size when ordering to avoid inappropriate size after purchase..
Check Stock

TEMCo TH0405 – 1-1/8” / 30 mm Hex Shank Demo Hammer T Post Driver Attachment

  • Fits 1 1/8” / 30mm hex shank import style Demolition Hammers – Shank style is hex with round end on - PLEASE CHECK YOUR HAMMERS VERY CAREFULLY BEFORE PURCHASE - This bit DOES NOT fit Makita, Milwaukee, Bosch, Dewalt or Hitachi hammers.
  • Turn your demolition hammer into a T-post driver with a deeper socket design the driver maintains alignment and saves time and energy driving t-post or any solid post that is less than 2” in diameter..
  • One-piece machined construction with a 2.5” long 2” Diameter Drive Socket - saves a lot of pounding with a manual t-post driver. The 2” deep socket guarantees easy installation of T posts..
  • Hardened steel body for increased durability –tool hardness specification of 45-55 Rockwell C.
  • Tool finish is perfect for commercial and industrial applications and keeps the tool from rusting (1 Year Guarantee or Full Refund. No Matter What.).
Check Stock

Ozark Armament Front Sight Adjustment Tool - Eliminates Bullet Method - Quickly Adjust A1/A2 (4 or 5 Prong) Front Sight Posts - Solid Metal Construction with Milled Aluminum

  • ALL WEATHER EASY GRIP: Milled center on this adjustment tool gives you a firm grip as you make adjustments to your front iron sight post, Non slip milled center is perfect in all weather situations and while wearing gloves.
  • UNIVERSAL: Adjust any front sight post with this iron sight tool, Comes with both 4 and 5 prong ends and will work either a1 or a2 front posts, Eliminates slips that damage and scratch equipment which could cause injury, This front sight tool fits any standard front sight post to give precise elevation adjustments.
  • RUGGED DURABILITY: Solid metal construction for a lifetime of use, Stands up to the elements and hard use, Works when wet or dropped, Place over front sight post and turn to get a precise elevation adjustment.
  • DEPENDABLE AND TIME SAVING: Eliminates wasted time by fitting perfectly over any A1 or A2 front sight post, Saves time by staying in a range bag without finding a knife, an extra round, or other object that may scratch the sight post, This sight adjuster works with all Ozark Armament front sights.
  • A BRAND YOU CAN TRUST: Backed by a full NO B.S. Lifetime warranty against any and all defects, full and dedicated U.S. based support team to answer your questions and make sure you are 100% satisfied with your purchase.
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

Woodturning Lathe Tools Project Woodturner T-Shirt

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on the market. Easy to operate meaning turners of all levels can use it..
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one at a time) with Stellite Cutters giving a combination of cuts that will remove bowls from 3" to 12" up to 5" deep from the inside of the mother bowl. Different shaped vessels can also be achieved..
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has a different diameter tool post so you may need to order a tool post to suit the lathe you are using if not 1". Set it up and start saving wood..
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove a perfect bowl every time. A template pattern to determine bowl depth is included, or purchas....
Check Stock

BISupply T Post Puller Fence Post Puller - Wood Fence Post Puller 36in T Post Remover and Tree Stump Remover for Yards

  • [Yard Work Made Easy]: BISupply Steel T Fence Posts Remover is the perfect tool to help remove T-posts, wooden fence posts, cement plugs, or small tree stumps.
  • Set up a new fence or clear up old trees from your yard with ease.
  • [Save Your Energy]: 36-inch (91.4cm) stump puller applies maximum leverage for the user to conserve strength and make the workload minimal.
  • Maximum weight capacity of up to 1,764 pounds (800kg).
  • [Easy to Use]: Stand T post fence tool upright with handle near waist height.
  • Put tree stump remover lock around stud and push the handle down to pull post upward.
  • Repeat this process by raising tree puller handle back up and fitting around lower stud.
  • [Built to Last]: T-post frame puller is made of heavy-duty steel with a 5-inch (12.7cm) base to provide sturdiness and convenient storage.
  • Powder-coating on stake puller helps prevent wear.
  • [Works in Various Situations]: Use 4x4 post puller for more than just fence posts and tree stumps.
  • 4x4 wood post remover can be used in farming, mining, boating, and construction.
Check Stock

PH PandaHall Ring Bending Machine, 6 Sizes Jewelry Ring Bender Maker Tool Set for Earring Finger Ring Jewelry Making, Wooden/Metal

  • 6 Sizes Available: round post 12mm, 14mm, 16mm, 20mm, and 22mm.
  • 6 different sizes can meet your different needs in jewelry making..
  • High Quality: made of solid wood and brass, professionally manufactured, and exquisite workmanship, durable and wear-resistant. Please note: the wooden board is for storage metal parts, during using, need put metal parts on the table instead of on the wooden board..
  • Easy to Use: install the long handle first, then select the size you need, put the wire into the space of the post, shake down the handle. This versatile ring bending tool performs all other bending tools..
  • Practical Tool: the operation method of ring tools is simple, durable and practical, suitable for jewelry repairmen. Suitable for processing ring and thin metal wire, for large items, it is recommended to fix the ring bending tool on the table with screws first..
  • Wide Applications: perfect for bending earring and ring.
  • suitable for home hand making or jewelry store..
Check Stock

MIXXIDEA Fence post Driver T Post Head Fence with Handle Steel Post hole digger Hand Post Rammer 24 Inch Brown

  • ...Heavy Duty T Post Driver: The metal fence post driver has features of two handles on both sides of the driver making it is easy to maneuver and comfortable gripping. Post driver makes installing this high-quality fence post driver makes it easy for you to drive wooden fence posts deep into the ground. It is a great tool to designed to drive t-post, wood, metal or any type of fence posts..
  • Just the Right Weight and Length of Fence Stretcher: High-quality duty heavy fence driver post steel structure, Durable metal finish, durable, improve the usability of the post rammer, fence stretcher. SIZE: 23.6 inches high x 9 inches wide, inner diameter is 2.6 inches..
  • Customer services: If you have any questions about the product or are not satisfied with the product, please feel free to contact us and we will provide you with the best solution. Your satisfaction is our biggest concern..
Check Stock

Bicycle Seat Post Clamp Aluminum Alloy 31.8mm/34.9mm Black/Red/Blue

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself..
  • 31.8mm Seat Post Clamp fits on the out diameter 30.2mm~32.1mm bike seat post.
  • 34.9mm Seat Post Clamp fits on the out diameter 33.5mm~35.2mm bike seat post.
  • 6061Aluminum Alloy made, lightly and solidly QIGROP.
  • M5 stainless steel bolt, Tool interface: 4mm hex key.
Check Stock

Bicycle Seat Post Clamp Aluminum Alloy 31.8MM/34.9MM Black/Red/Blue

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself.
  • 31.8mm Seat Post Clamp fits on the out diameter 30.2mm~32.1mm bike seat post.
  • 34.9mm Seat Post Clamp fits on the out diameter 33.5mm~35.2mm bike seat post.
  • 6061Aluminum Alloy made, lightly and solidly.
  • M5 stainless steel bolt, Tool interface: 4mm hex key QIGROP.
Check Stock

BestEquip Metal Lathe, 8\ x 16\ Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, Mini Lathe with 3-Jaw Chuck, Bench Top Metal Lathe, for Various Types of Metal Turning

  • 400mm Large Swing Range: The benchtop lathe is equipped with a 3-jaw chuck. Swing Over Bed: 8-1/4" (210 mm) and Swing Over Cross Slide: 15-3/4" (400mm) offers more possibilities for large size or/and heavy workpieces..
  • Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8" max tool size)..
  • Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included..
  • Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8" (54mm), cross slide 3" (76mm)..
Check Stock

Mophorn 7x12 Inch Luxury Version Metal Lathe 550W Precision Bench Top Mini Metal Milling Lathe Variable Speed 50-2500 RPM Nylon Gear with A Movable Lamp (7x12 inch)

  • ... Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post and 4x Engineers Measuring Kit are included.
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works. 9 Cutters for easy replacement. Friendly Note: Blue / Red metal lathe is shipped randomly.
Check Stock