Reviews Tool Jack

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

Cable Matters 110 Punch Down Tool with 110 Blade

  • Punch down tool cuts and terminates cable into a 110 patch panel or keystone jack.
  • Removable blade of impact style tool with twist and lock sockets can be stored in the tool body for transport.
  • Adjustable impact force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals.
  • Keystone jack compatible with Cat 3, Cat 5, Cat 5e, Cat 6, and Cat 6A network or voice cable.
  • Pair with a keystone jack punch down stand for a safe a secure installation.
  • 110 block tool uses spring-action for fast, low-effort cable seating and termination with reversible cut/punch blade.
Check Stock

Hand Lifting Tool Jack Set, Labor-Saving Arm Jack Solid Metal Handheld Door Cabinet Drywall Lifter Jack, Wall Tile Height Adjuster Tool for Installation of Doors,Windows, Cabinets,Tiles and Etc, 2 Pcs

  • √【2023 Upgraded Hand Lifting Tool Jack】: This Tile Adjuster is made of high-quality metal materials, durable and rust-proof. The combination of steel handle and comfortable soft rubber handle allows you to easily hold the handle and use it with less effort. The arm tool jack adopts high-strength steel spring core which has strong compression resistance, lasting elasticity and does not deform after repeated use.The height of handheld jack can be adjusted freely 1-10 cm..
  • √【Multifunctional High Quality Hand Jack】: The lifting cabinet jack is made of hardened stainless steel/aluminum, it can withstand up to 1210 lb / 550 kg weight. This labor-saving arm jack is not only commonly used for the installation of doors, windows, and cabinets, but also very suitable for the installation of glass, ceramic tiles, and floors. With the handheld jack, all of these and more can be done easily with controlled accuracy. Increases productivity, saves time and money..
  • √【Arm Jack Strong Structure】: The supporting plate, pressing plate and base are all thickened. So the board lifter jack can be durable, practical and sturdy. Moreover, the compression spring is made of high-toughness silico-manganese steel, which has sufficient durability and elasticity. In....
Check Stock

2 Pack Hand Lifting Tool Jack Set, Labor-Saving Arm Jack Up to 550 KG, Door Use Board Lifter Suitable for Board Cabinets Doors Windows Floor and Tiles,Best Gift for Workman,Father or Husband

  • 【High Quality Hand Jack】: This Tile Adjuster is made of high-quality metal materials, durable and rust-proof. The combination of steel handle and comfortable soft rubber handle allows you to easily hold the handle and use it with less effort. The arm tool jack adopts high-strength steel spring core which has strong compression resistance, lasting elasticity and does not deform after repeated use.The height of handheld jack can be adjusted freely 1-10 cm..
  • 【Multifunctional Hand Lifting Tool Jack】: The lifting cabinet jack is made of hardened stainless steel/aluminum, it can withstand up to 1210 lb / 550 kg weight. This labor-saving arm jack is not only commonly used for the installation of doors, windows, and cabinets, but also very suitable for the installation of glass, ceramic tiles, and floors. With the handheld jack, all of these and more can be done easily with controlled accuracy. Increases productivity, saves time and money..
  • 【Arm Jack Strong Structure】: The supporting plate, pressing plate and base are all thickened. So the board lifter jack can be durable, practical and sturdy. Moreover, the compression spring is made of high-toughness silico-manganese steel, which has sufficient durability and elasticity. In addition, the Lifter C....
Check Stock

TOLOO Hand Lifting Tool Jack Set, 2 Pack Labor-saving Arm Jack Up to 550 KG,Door Cabinet Drywall Lifter Jack, Wall Tile Height Adjuster Tool for Installation of Doors,Windows,Cabinets,Tiles and Etc

  • √【2022 Upgraded Hand Lifting Tool Jack】: This Tile Adjuster is made of high-quality metal materials, durable and rust-proof. The combination of steel handle and comfortable soft rubber handle allows you to easily hold the handle and use it with less effort. The arm tool jack adopts high-strength steel spring core which has strong compression resistance, lasting elasticity and does not deform after repeated use.The height of handheld jack can be adjusted freely 1-10 cm..
  • √【Multifunctional High Quality Hand Jack】: The lifting cabinet jack is made of hardened stainless steel/aluminum, it can withstand up to 1210 lb / 550 kg weight. This labor-saving arm jack is not only commonly used for the installation of doors, windows, and cabinets, but also very suitable for the installation of glass, ceramic tiles, and floors. With the handheld jack, all of these and more can be done easily with controlled accuracy. Increases productivity, saves time and money..
  • √【Arm Jack Strong Structure】: The supporting plate, pressing plate and base are all thickened. So the board lifter jack can be durable, practical and sturdy. Moreover, the compression spring is made of high-toughness silico-manganese steel, which has sufficient durability and elasticity. In....
Check Stock

Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover - 4PC

  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Rotate the tool when you can't press it in..
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover..
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a....
Check Stock

GripStick Headphone Plug Extraction Tool

  • PRODUCT COMPOSITION: This headphone extraction tool kit cutting has stainless steel pipes. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 100 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!.
Check Stock

Crescent Tool Compatible with Jack Lalanne Power Juicer Delux & PRO & Classic (Orange)

  • 【GREAT TOOL】You need this tool to get the blade off, don’t loose it. Simply detached the blade to clean everything..
  • 【COMPATIBLE WITH】: The crescent tool compatible with jack lalanne power juicer models: CL003AP, E1188, E1189, MT1000..
  • 【NOTE】:The crescent tool is not created or sold by Jack lalanne..
  • 【HIGH QUALITY】: Made of high quality plastic for durability and safety. easy to operate..
  • 【DOES NOT FIT】:Doest NOT compatible with Jack Lalanne Compact Power Juicer Express Deluxe MT-1020 JLPJB Model.
Check Stock

Crescent Tool Compatible with Jack Lalanne Power Juicer Delux & PRO & Classic

  • 【COMPATIBLE WITH】: The crescent tool compatible with jack lalanne power juicer models: CL003AP, E1188, E1189, MT1000..
  • 【NOTE】:The crescent tool is not created or sold by Jack lalanne..
  • 【DOES NOT FIT】:Doest NOT compatible with Jack Lalanne Compact Power Juicer Express Deluxe MT-1020 JLPJB Model.
  • 【HIGH QUALITY】: Made of high quality plastic for durability and safety. easy to operate..
  • 【GREAT TOOL】You need this tool to get the blade off, don’t loose it. Simply detached the blade to clean everything..
Check Stock

Cable Matters UL Listed 25-Pack Slim Profile 90 Degree Cat 6, Cat6 RJ45 Keystone Jack with Keystone Punch Down Stand in White

  • ...gabit Ethernet with Cat 6 Ethernet cables terminated into this Cat6 keystone jack.
  • Ethernet keystone jack is backwards compatible with a 10/100 Ethernet network and Cat5e cable.
  • Meets or exceeds Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard.
  • 90 degree easy termination RJ45 jack supports tool-free, impact tool, or crimp tool termination.
  • IDC modules have universal T568-A or T568-B labeling and accept 110 tool termination.
  • compatible with the Cable Matters RJ45 Crimp Tool with 90-Degree Die Module for precision termination.
  • UL listed Heavy duty keystone jack with T568A and T568B color-coded labels.
  • Category 6 rated performance up to Gigabit Ethernet speeds for a fast and reliable network.
  • Supports T568A and T568B wiring with 110-style, color-coded termination blocks.
  • Heavy duty construction includes an impact-resistant and fire-retardant housing with gold-plated RJ45 contacts, IDC covers, and a snap-in retaining clip for a secure connection.
  • Cost-effective 25-pack of Cat6 keystone jacks includes a keystone jack punch down stand for easier and safer cable termination.
  • Includes a lifetime warranty for peace of mind when purchasing.
Check Stock

kenddeel Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • ️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
  • ️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
  • ️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
  • ️Tep: This set of headphone jack remover tool is considered a single-use tool..
  • ️If you have any question, please feel free to contact us by email..
Check Stock

Crescent Tool Compatible with Jack Lalanne Power Juicer Delux & PRO & Classic (Black)

  • 【COMPATIBLE WITH】: The crescent tool compatible with jack lalanne power juicer models: CL003AP, E1188, E1189, MT1000..
  • 【NOTE】:The crescent tool is not created or sold by Jack lalanne..
  • 【DOES NOT FIT】:Doest NOT compatible with Jack Lalanne Compact Power Juicer Express Deluxe MT-1020 JLPJB Model.
  • 【HIGH QUALITY】: Made of high quality plastic for durability and safety. easy to operate..
  • 【GREAT TOOL】You need this tool to get the blade off, don’t loose it. Simply detached the blade to clean everything..
Check Stock

K Tool International Hydraulic Jack 22 Ton Blue Air Truck Jack HD KTI63194

  • [22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 9" (228mm).
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation..
  • [STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear..
Check Stock