Reviews Tool For Stock Analysis

Cole-Parmer PC Application Software for Visible Light spectrophotmeter

  • Improves CID fragmentation of proteins with disulfide linkages. Enhances in-source fragmentation of peptides. Easy reconstitution directly in vial for ready-to-use stock.
  • Each Ultrapure MALDI matrix is provided as a recrystallized and highly purified powder. This product is for R&D use only.
  • it is not for drug, household, or other uses.
  • MS and MS/MS analysis of peptides and proteins with disulfide linkages. Peptide analysis in ISD (In Source Decay) experiments. Analysis of gangliosides by MALDI-MS.
Check Stock

CNCEST 30V 10ADC Power Supply,110V Precision Variable Adjustable Digital Regulated Output for Battery Charging Production Line Test for Laboratory,Car DVD,Car Audio

  • Improves CID fragmentation of proteins with disulfide linkages. Enhances in-source fragmentation of peptides. Easy reconstitution directly in vial for ready-to-use stock.
  • Each Ultrapure MALDI matrix is provided as a recrystallized and highly purified powder. This product is for R&D use only.
  • it is not for drug, household, or other uses.
  • MS and MS/MS analysis of peptides and proteins with disulfide linkages. Peptide analysis in ISD (In Source Decay) experiments. Analysis of gangliosides by MALDI-MS.
Check Stock

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

  • RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
  • Turn on the tracking source output bandwidth 33mhz---3000mhz.
  • Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
  • Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
  • Computer operating system: Winxp, Win7, Win10.
  • 35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
  • Signal Tracking Source Module with Shell. Sweep Step: ≥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....
Check Stock

HiMedia Laboratories M096-500G Potato Dextrose Agar, 500 g

  • see description for the certificate of analysis.
  • All stock has ample shelf life / use by , or a refund is given.
Check Stock

AXENIC 20 Gram Beta-Nicotinamide Mononucleotide (NMN) 97.5% beta-NiacinamideMononucleotide

  • see description for the certificate of analysis.
  • All stock has ample shelf life / use by , or a refund is given.
Check Stock

MetaTrader 5

  • Full set of trading orders for flexible Forex and Stock trading.
  • Unlimited amount of charts with 21 timeframe and one-minute financial symbols history.
  • Technical analysis with dozens of technical indicators.
Check Stock

Delta Neutral Trading Guide Plus MS Excel Software

  • No Technical Analysis – Learn to Trade Like a Hedge Fund Manager!.
  • Easy to Use MS Excel Financial Models for All Types Trading.
  • Profit whether or not a stock/option/future is going up or down!.
  • More than 100+ Pages of Trading, Market Making, and Trading Strategies.
  • Same Day Shipping (If order is placed before 5PM EST)! Delivered as CD-ROM..
Check Stock

Mophorn Electric Overhead Stirrer Mixer 0-3000 RPM Overhead Stirrer Mixer 100W Overhead Stirrer 0-120 Minutes for Lab Mechanical Mixer

  • Digital Lab Stirrer: Stir Bar Length: 7.9"(20 cm).
  • This digital overhead stirrer with variable speed function, simple operation on a broader speed range, apply to a stable liquid stirring, especially for mixing a small volume of samples, petroleum, and chemical..
  • Outstanding Performance: This electric stirrer features a 100W powerful motor. It can drive the mixer at the speed of 0-3,000 rpm, ideal for any demanding overhead stirring task in which the viscosity varies during the entire process, either through reaction or due to mixing..
  • Simple knob control: Timer range: 0-120 minutes. Simple knob control, easy to change speed and time. It is an essential tool for the petroleum, chemical, biochemical laboratory, and analysis room, and education department..
  • Adjustable Support Stand: This overhead lab stirrer includes a support stand with a flexible holder. It can fix the container of different samples, which is convenient and can be adjusted at will..
  • Wide Application: An lab stirrer mixer is an essential tool for petroleum, chemical industry, metallurgy, textile, food, medicine and health, biochemical laboratory, analysis room, cosmetics, and education department..
Check Stock

D YEDEMC Mini-Pro 1310/1550nm SM OTDR Mulit-Function Tester Built in OPM/OLS / RJ45 Test/VFL Test Rang 5m-60Km Dynamic Range 24dB/22dB Connector UPC with FC/APC-FC/UPC-SX (YD-3000-UPC)

  • ... Built-In: 3.5 inch Color Display (not touch).
  • OTDR, Event Map, Power Meter, Light Source, VFL, Cable Length Measurement Tool, Cable Tracker, and RJ45 Sequencer.
  • Internal Storage: Micro USB Data Interface.
  • External storage TF Card. Analysis Software included for further data analysis or processing,(Note:The Analysis Software need install on PC,Using the Analysis Software open print the test result and print).
  • Please make sure you are a professional before purchasing. If you can't test, please contact us. Our products have been strictly tested before leaving the factory and will not be unusable. Because of the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems..
Check Stock

1.2 Meter 150W 12V Silicone Heater For Windshield Screen Wiper De-icing Snow Melting Electric Heating Pads Strip Heat Mat

  • Tools and accessories for general repair and replacement include: Hand Tools, Screwdriver, Knife & Saw Blade, Soldering Tool, Power Tools, Measurement & Analysis Instruments, Weighing Scales, Multimeters, Measurement & Analysis Instruments, Lights & Lighting, Electrical Equipment & Supplies, Door Hardware, Kitchen Tools, Household Cleaning Tools, Home Decor & Crafts..
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
  • 90% conventional orders will be delivered within 15-25 days..
  • Please note that the products are only offered by Up To Store brand. Other sales people is not reliable..
Check Stock

German WWI Mauser C-96 Broomhandle Holster Rig X 2 Units

  • Please Check The Size a Wood Stock Before Ordering Broom Handle Holster.
  • Harness for transporting a C-96 pistol, wood stock and cleaning tool..
  • All model Mauser C-96 Broomhandle, Bolo, etc..
  • WOOD STOCK is Not For Sale, Its Showing For Size.
  • Wood Stock is Not For Sale, Its Showing Only For Size..
Check Stock

Eastwood Rod Forming Tool Steel Construction Bend Mild Stainless Steel Aluminum Rod For Round Flat Square Stock

  • The Eastwood Rod Forming Tool Is A High Quality, Industrial Style Tool Capable Of Generating A Powerful Leveraged Force .
  • Create 180° Or Greater Repeatable Bends In Mild Steel, Stainless Steel, And Aluminum Rods Up To 3/8” Diameter And Flat Stock Up To 1/2” Wide And 3/16” Thick.
  • Maximum Flat Stock Material Thickness: 3/16” For 1/2” Wide Mild Steel Or 1/4"" For 1/4” Wide Mild Steel.
  • 0.5” D/0.25” , 0.75” D/0.38 , 1.5” D/0.75” , 1.25” D/0.63” , 1” D/0.5" Radius Die.
  • Creates Bends In Round, Flat Or Square Stock.
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • ...in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • Bending Forge Scrolling Welding Jig: Fits in 1 inch Hardy hole i....
Check Stock