Reviews Too Die Steel Bars

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

BalanceFrom Olympic Barbell Standard Weightlifting Barbell

  • 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 1.97" bar end diameter to ensure bars fit all standard plates with holes 1" or 2".
  • Bars only. Plates and collars are not included.
Check Stock

Sporzon! Olympic Barbell Standard Weightlifting Barbell

  • 1-inch or 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 0.97" or 1.97" bar end diameter to ensure bars fit all standard plates with holes 1" or 2".
  • Bars only. Plates and collars are not included.
Check Stock

Sporzon! Olympic Barbell Standard Weightlifting Barbell

  • 1-inch or 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 0.97" or 1.97" bar end diameter to ensure bars fit all standard plates with holes 1" or 2".
  • Bars only. Plates and collars are not included.
Check Stock

BalanceFrom Olympic Weightlifting Barbell 700 lb Capacity Chrome

  • 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 1.97" bar end diameter to ensure bars fit all standard plates with holes 2".
  • Bars only. Plates and collars are not included.
Check Stock

BalanceFrom Olympic Barbell Standard Weightlifting Barbell

  • 1-inch or 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are black or chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity (2-inch) and 350-Pound capacity....
  • 0.97" or 1.97" bar end diameter to ensure bars fit all standard plates with holes 1" or 2".
  • Bars only. Plates and collars are not included.
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

Powergainz Olympic Barbell Standard Weightlifting Barbell, 300-Pound Capacity,Black

  • 1-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 300-Pound capacity.
  • 0.97" bar end diameter to ensure bars fit all standard plates with holes 1".
  • Bars only. Plates and collars are not included.
Check Stock

Powergainz Olympic Barbell Standard Weightlifting Barbell, 700-Pound Capacity,Black

  • 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 1.97" bar end diameter to ensure bars fit all standard plates with holes 2".
  • Bars only. Plates and collars are not included.
Check Stock

Trap Bar Training Book 2

  • ...st iron plate has large, raised weight markings in both the metric and imperial system so you can quickly choose the right one while working out. Extremely durable trap bar weights set will last for years..
  • 【Bumper Plates---Ultra Quiet Design】Solid rubber construction, steel inner hub designed to withstand repeated drops and with minimal bounce, reduced noise of bumpers considerably, not only protect the floors, but also protect your bars. Each bumper plate is color coded, and clear labeled in both LB and KG, standard 450MM / 17.7inch in diameter , thickness varies by weight..
  • 【Fully Solid Steel Construction】The trap bar is constructed from heavy duty steel frame and sealed with chrome finish, making it durable for you. Made of heave duty steel (not hollow) and sealed with a black power coaching, no rust, no corrosion. The fully solid sleeves works well with wider bumper plates. The hex area is larger than some other bars too..
  • 【2 Different Grip Positions with Knurled Handles】The dual handle grip knurling feels good, it's not too aggressive on skin but not too light and slippery either. With 2 differen....
Check Stock

BalanceFrom Olympic Bar for Weightlifting and Power Lifting Barbell 700-Pound Capacity

  • 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 1.97" bar end diameter to ensure bars fit all standard plates with holes 2".
  • Bars only. Plates and collars are not included.
Check Stock

BalanceFrom Olympic Bar for Weightlifting and Power Lifting Barbell, 700-Pound Capacity

  • 2-inch diameter bars at the length and color of your choice: 5-Foot, 6-Foot, 7-Foot.
  • Bars are chrome plated with solid steel construction for repeated use and long lasting.
  • Multiple knurling positions and lengths for your convenience and safety. All bars are rated 700-Pound capacity.
  • 1.97" bar end diameter to ensure bars fit all standard plates with holes 2".
  • Bars only. Plates and collars are not included.
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock