Reviews Toilet Flush Valve Replacement

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • ... toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve..
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water..
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • ...oilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water..
Check Stock

Korky Platinum Fill Valve and Flapper Kit

  • UNIVERSAL FILL VALVE: This toilet fill valve replaces ballcocks & worn down valves for different types of 2-piece & 1-piece toilets. It’s easy to install & keeps your toilet running smoothly..
  • EASY TO INSTALL: Quiet replacement fill valve has a twist-lock adjustment that makes installation the easiest when you’re doing toilet repairs. Adjustable from 7.75” to 13.5.”.
  • INCLUDES: Installs in less than 5 minutes. Includes fill valve, refill tube, metal refill tube clip, mounting nut, cone washer, refill adjuster, coupling nut, tamper proof key & instructions..
  • UNIVERSAL FLAPPER: The 2″ universal flapper adjusts to fit flush valves in HET toilets & the flexible long lasting rubber creates a tight seal..
  • FOR LEAKING & RUNNING TOILETS: Save on expensive water waste with this large toilet flapper with a universal & adjustable design that fits standard flush valves & newer toilet models. No tools required..
  • LONG LASTING CHLORAZONE red rubber city water treatment, hard & well water. This toilet part replacement includes the universal adjustable flapper & stainless steel chain..
Check Stock

2-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291)

  • Perfect Replacement for your Kohler K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620.
  • Create A Stronger Flush: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!.
  • Works On Kohlers With Flush Valve: Compatible with all Kohler toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8".
  • 3 Minute Install: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 2 for a great value!.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing).
Check Stock

5-Pack of Kohler -Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291) - Replacement Parts for GP1049291 Tank Canister Gasket Kit - By IMPRESA

  • Perfect Replacement for your Kohler (TM) K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part / kit K - GP1059291 / 2475620 / 1049291.
  • Creates A Stronger Flush: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!.
  • Works On Kohlers With Flush Valve: Compatible with all Kohler (TM) / Kholer / Koehler toilet tanks with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8".
  • 3 Minute Repair Install: Installation instructions for proper use below. Installation and assembly is simpler than you'd expect, and does not require you to remove the base of the toilet.
  • High Quality At A Great Value: Made from a purpose-specific rubber blender, our 5-pack of parts provide top quality at an excellent value. Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing).
Check Stock

4 Pack 7301111-0070A Flush Valve Seal Kit Replacement by BlueStars - Exact Fit for American Standard & Eljer Toilets - Flush Valve Seal Replacements For Toilets

  • ✅ PACKAGE INCLUDES: 4 x 7301111-0070a flush valve seal kit, sufficient quantity for you to replace the old or damaged one and convenient for you to repair your toilet..
  • ✅ PREMIUM QUALITY RUBBER: Our toilet gaskets are made from high-quality, durable rubber, hold up against chlorine and other chemicals in the water supply. The gasket outer diameter is 4 1/4 inches, O-ring outer diameter is 9/16 inches. Please check the size carefully before purchasing..
  • ✅ PERFECT REPLACEMENT: Perfect replacement for widely used Standard 7301111-0070A Flush Valve Seal Kit / Gasket and O Ring Repair Kit for Champion 4 tank. It is compatible with American Standard Champion 4 and Eljer Titan 4 model toilets. It will only take you a few minutes to complete the installation, and will not require you to remove the base of the toilet..
  • ✅ CREATE A STRONGER FLUSH: Toilet gasket seals wear out over time and need to be replaced. The replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Enjoy risk-free purchases. Order with confidence..
Check Stock

Lavelle 4030PK Korky 2-Inch Adjustable Flush Valve Kit with Tank-to-Bowl Gasket and Hardware, Black

  • 2" VALVE & BOWL GASKET KIT: Quick & easy to install, the flush valve height easily adjusts from 7" to 11-1/2", with no tools or hack sawing required. The oversized tube & funnel reduce flood risk while the included premium flapper ensures a tight, leak-proof seal..
  • ADJUSTABLE UNIVERSAL TOILET KIT: Ideal for all standard 2 inch toilets, including: 1.28, 1.6, 3.5 and 5 gallons per flush. Includes flush valve, tank to bowl gasket, flapper, hardware & instructions..
  • LONG LASTING CHLORAZONE red rubber, city water treatment, hard & well water..
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber..
  • REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

Toilet Tank Gasket Replacement Kit with 3 Sets Brass Hardware Kits and 2 Pcs Gasket Fits Most 2-Inch/2.5-Inch Flush Valve Opening Toilet Tanks.

  • 【Fits 2" flush valve opening】The 2 inch tank to bowl gasket and hardware Kit is universal to fit most 2 inch two-piece toilet,fits most 2-Inch/2.5-Inch flush valve opening toilet tanks..
  • 【Easy to install】Leaking toilet tank? Fixed a leaky tank with this toilet tank repair kit prefect fit and easy to install,even a non-plumber can install it..
  • 【Package】Tank to bowl gasket kit with 3 sets brass hardware kits and 2 Pcs long lasting rubber gasket fits (2 inch +2.5 inch) for fit flush valve opening..
  • 【Quick installation design】The toilet tank gasket replacement kit adopts a quick installation structure,which can be easily installed without crouching.
  • 【1-YEAR WARRANTY & 30-DAY FULL REFUND POLICY】 Our toilet bowl repair kit with a 1-year warranty,contact us if you are not satisfied with this toilet tank gasket kit for any reason,you may return it without any questions asked within 30-days of the purchase date for a full refund of the purchase price..
Check Stock

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

  • WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
  • REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
  • LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
  • COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
  • EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Check Stock

LASCO 04-2353 Replacement Flush Valve for 1-Piece Toilets with Flapper and Chain, 3-Inch

  • Replacement 3-Inch flush valve for 1 piece toilets.
  • Universal fits most 1 piece toilets with 3-Inch valve.
Check Stock

3 Pieces Water Tank Replacement Kit Include Toilet Flush Lever Handle Universal Toilet Handle Replacement Toilet Flapper Replacement for Toilet Tank

  • Package includes: you will receive 1 piece of water tank inlet valve, 1 piece of universal toilet handle replacement, 1 piece of toilet flapper replacement, rich styles can meet your combination needs.
  • Quality materials: toilet handle replacement is made of metal materials, and the surface is chrome-plated, which is not easy to wear.
  • Toilet flapper replacement is made of rubber and stainless steel chain, reliable and odorless.
  • The water inlet valve is made of plastic and is processed by injection molding, which can serve you for a long time.
  • Scientific design: the rod of the toilet handle is iron-plated, and three wire hanging holes are designed.
  • You can adjust it according to the actual size, can easily rotate it to adjust the water volume.
  • Adjustable design: the flexible frame universal flapper adopts adjustable design, which can handle with city water, hard water and well water.
  • It is also resisting chlorine and gems issues, which suits most American standard toilet water tank.
  • Easy to install: this toilet tank lever handle is compatible with most common toilets with a front mount flush lever.
  • The level fits for square mounting holes, flush lever locknut is equipped with a reversed screw thread to prevent loosening over time.
Check Stock