Reviews Toggle Bolt And Screw Kit

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

  • ♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
  • ♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
  • ♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
  • ♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
  • ♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Hilitchi Molly and Toggle Bolt Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt 30Pcs 1/4 Inch

  • ✅【STRONG AND WELL MADE】Quality stainless steel anchors, rustproof, anti-corrosion eco-friendly material. Stainless steel can be used in humid environment and could last for a a long time. A brand new and excellent toggle bolt kit we offer. If not, please come to us soon, we promise to solve the problem for you..
  • ✅【HOUSEHOLD SPARE HARDWARE】3 different sizes available(1/4”, 3/16”, 1/8”) respectively 30PCS and 60PCS quantity for your choice. This pretty much takes care of any light duty anchoring that would be needed in a regular household. Use in drywall, plaster wall and tile, thin or hollow walls and other board materials. Good quality little kit. Order now and store it for future use because it will make your home repair job much easier..
  • ✅【TIME SAVER HOME TOOLS】Got small items to hang on the wall and also some others large mirrors and pictures? Buy this kit for spare tools would be great. Just move to a new place and have to rehang a lot of stuffs? from shelves to picture frames, our anchors handle this all well for you. Once they are in, they have the powerful strength to hang your items. Make your new house nice and cozy. A better life for you..
  • ✅【HOW TO APPLY THIS KIT】First, you need to drill a hole (big enough to thre....
Check Stock

HASWARE Zinc Plated Steel Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall (1/4\ x 3\

  • ★【STRONG AND WELL MADE】Quality stainless steel anchors, rustproof, anti-corrosion eco-friendly material. Stainless steel can be used in humid environment and could last for a a long time. A brand new and excellent toggle bolt kit we offer. If not, please come to us soon, we promise to solve the problem for you. 100% satisfaction. We always believe that customer first..
  • ★【HOUSEHOLD SPARE TOOLS】3 different sizes available(1/4”, 3/16”, 1/8”), each size kept in one separate compartment. This pretty much takes care of any light duty anchoring that would be needed in a regular household. Use in drywall, plaster wall and tile, thin or hollow walls and other board materials. Good quality little kit. Order now and store it for future use because it will make your home repair job much easier..
  • ★【TIME SAVER HOME TOOLS】Got small items to hang on the wall and also some others large mirrors and pictures ? Buy this kit for spare tools would be great. Just move to a new place and have to rehang a lot of stuffs ? from shelves to picture frames, our anchors handle this all well for you. Once they are in, they have the powerful strength to hang your items. Make your new house nice and cozy. A better life for you..
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

T.K.Excellent Phillips Pan Head Self Tapping Screws and Ribbed Anchors Assortment Screws Kit,400Pcs

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power.
  • Plastic material expansion sleeve low cost, no rust, corrosion resistance, anti-aging, good toughness.
  • Once anchor installed, they provide a flush, clean appearance in drywall.
  • Toggle bolt's wings spreads the force over the bearing surface, comes attached to a screw, use in concrete and brick.
  • Kit includes:anchors:#6-#8,#10-#12,#12-#14.
Check Stock

T.K.Excellent Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

DIY.TK Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
  • Kit Includes:E6,E7,E8 anchors, #6x1",#8x1-1/4",#10x1-1/2"pan head self-tapping screws（ANSI) ,and a plastic case.
  • Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness and can be easily removed.
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock