Reviews Titanium Tube Mill

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Dia 35mm 1.38\ Length 100mm 3.94\ TC4 Titanium 6al-4v Round Bar Rod

  • Dimension: 500MM (19.685") x 4MM(0.157") diameter..
  • Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
  • Merit: high strength-to-weight ratio, light weight, and Never rust..
  • Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

38mm Titanium 6al-4v Round bar 1.496\ x 20\ Ti Grade 5 Solid Metal Alloy 1.5 rods

  • Dimension: 500MM (19.685") x 6MM(0.236") diameter..
  • Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
  • Merit: high strength-to-weight ratio, light weight, and Never rust..
  • Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

Coulton Mill

  • FASTER THAN THE COMPETITORS IN ITS PRICE RANGE - This grain mill for flour is powered by a 1,250-watt LG Electronics motor that gives both capacity and longevity.
  • an electric flour mill grinder that’s sturdy, fast-grinding and built to last.
  • HEAVY DUTY - An electric grain grinder that grinds over 100 lbs of flour in 1 hour without overloading.
  • Unlike other flour mills, this flour grinder mill is also an electric wheat grinder, corn grinder, rice grinder or brewery grinder..
  • LIFETIME WARRANTY - Wondermill flour grinder mill complies with the most demanding quality and safety standards - UL (USA), CSA (Canada), and CE (the European Union). A limited lifetime warranty is included with each Wondermill purchased.
  • QUIET, EASY AND DUST-FREE - With only 5 parts and no complicated settings or switches.
  • An easy-clean cyclo-canister and filtration tube catches all ground flour without the big mess while its quiet operation lets you mill peacefully without all the noise.
  • HEALTHIER CHOICE - This electric flour mill can work up to 10 hours without overheating.
  • Preserves the quality nutrients of healthy food options & homemade bakery with its most powerful micronizing milling chamber and stainless steel fins.
Check Stock

5Pcs Titanium Rod Dia 6mm 0.236 Length 500mm 19.685 RISON Titanium GR5 Titanium Bar 6al-4v Round Bar 6mmx500mm Titanium Round Rod

  • Dimension: 500MM (19.685") x 6MM(0.236") diameter..
  • Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
  • Merit: high strength-to-weight ratio, light weight, and Never rust..
  • Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
Check Stock

5Pcs Titanium Rod Dia 10mm 0.394 Length 500mm 19.685 RISON Titanium GR5 Titanium Bar 6al-4v Round Bar 10mmx500mm Titanium Round Rod

  • Dimension: 500MM (19.685") x 10MM(0.394") diameter..
  • Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
  • Merit: high strength-to-weight ratio, light weight, and Never rust..
  • Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
Check Stock

5Pcs Titanium Rod Dia 7mm 0.276 Length 500mm 19.685 RISON Titanium GR5 Titanium Bar 6al-4v Round Bar 7mmx500mm Titanium Round Rod

  • Dimension: 500MM (19.685") x 7MM(0.276") diameter..
  • Material: GR5 Titanium Alloy Ti-6Al-4V with unpolished Mill Finish..
  • Merit: high strength-to-weight ratio, light weight, and Never rust..
  • Service: Credit Suisse Titanium has been focusing on titanium products for ten years and has a rich inventory of high-quality raw materials. Titanium material is healthy and environmentally friendly, lighter than aluminum, harder than steel, and far superior to organic materials such as stainless steel. We hope to provide you with high-quality products and satisfactory service..
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock