Reviews Titanium Nitride Coated End Mills

RedLine Tools - 3/32 (.0938) Single End Corner Radius Carbide End Mill, Amorphous Diamond Coated Coated, 3 Flute .1390 LOC .0150 Radius, Round Shank Type, 2.5000 OAL - RET7934

  • 3 flute design for smoother/quieter milling operations High Performance ideal for pocketing steel, titanium and exotic alloys Ideal for long reach peripheral milling Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

IRWIN Drill Bit Set, Titanium Nitride Coated, 29-Piece (3018003)

  • Titanium Nitride Coated-coated nitride drill bits last longer and feature a cutting edge that stays sharp.
  • 135° split-point tip starts drilling immediately and helps eliminate walking.
  • IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses.
  • Includes 1/16" through 1/2" drill bit sizes in 1/64" increments.
  • Titanium Nitride drill bits last longer and feature a cutting edge that stays sharp.
Check Stock

YG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

  • Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
  • Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Check Stock

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

  • TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
  • POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
  • SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
  • 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
  • HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Niagara Cutter - CM490-0.250-D1-C.0-Z4 17004752 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 1/8 Cut Cutting Length 1/4 Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CM460-0.500-D1-C.0-Z4 17004750 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16' Cut Cutting Length, 1/2' Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CM460-0.250-D1-C.0-Z4 17004748 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 3/16' Cut Cutting Length, 1/4' Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - C430-0.188-D7-S.0-Z4 N85729 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 3\ Overall Length, 0.188\ Cutting Diameter, 0.188\ Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CSD430-0.375-XD2-S.0-Z4 17006425 Carbide Square Nose End Mill, Double End, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5' Overall Length, 0.375' Cut Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
  • Item Package Dimension: 2.899999997042" L x 0.699999999286" W x 0.599999999388" H.
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock