Reviews Titanium Electrode Insoluble Anode

Alegus Powered Anode Rod(30-100 Gallon Tank), Replacement Electrical Anode Rod for Hot Water Heater, Eliminate Odor (Sulfur/Rotten Egg Smell), Tank Corrosion Protection and Reduce Limescale

  • Long Lasting Quality: Made of high quality Titanium. With Alegus Electrical Titanium Anode Rod in your water tank, you will not have to replace the magnesium anode rod any more..
  • Eliminate Odor (Sulfur/rotten egg smell): Eliminate your hot water heater/well water odor problem by removing the rotten egg smell with our advanced powered anode rod..
  • Protect Heaters Against Corrosion: Keep your water heater running efficiently, extend its lifespan and ensure you have clean, high-quality water for years to come..
  • Quick and Easy Installation: Included the step-by-step installation instructions to make installing the Titanium anode rod much easier. It’s easy to install and replace and provide reliable use..
  • Perfect for 30-100 Gallon water tank. The replacement anode rod is designed to replace your 30-40, 40-80, 90-100 gallon water heater’s anode rod, it can help defend against any level of water hardness..
Check Stock

RuiLing 12pcs AAA To AA Size Battery Converter Adapter Holder Convenient PP Plastic Case Switcher for AAA to AA Battery

  • Made of more flexible environmental PP material. Large strength and strong toughness, no longer cracking, greatly increased the service life. At the....
  • There is battery limit slot, can be fixed the battery in a good place..
  • The negative electrode of the AAA battery is directly exposed..
  • The positive electrode (+) adopts the lengthened pure coppered nickel anode cap, compatible with the appliance with deeper anode slot, at the same....
  • Nothing complicated, just stick the AAA battery in the converter and it's the same as a AA battery. AAA battery can replace AA battery to use..
Check Stock

Apera Instruments, LLC-AI1312 Apera Instruments 201T-S pH/Temp. Electrode, 8-pin Connector, The Replacement Electrode for Apera 400/400S Series Portable Meters

  • 1.Glassy carbon, or glassy carbon, is a kind of amorphous carbon, which is made by slowly heating polyacrylonitrile resin or phenolic resin to a high temperature (up to 1800 ℃) in an inert atmosphere. It is suitable to be used as an electronic conductor material for electrodes and is also widely used in table tennis.
  • 2.The advantages of glassy carbon electrode are good conductivity, high chemical stability, low coefficient of thermal expansion, hard texture, good air tightness, wide application range of potential (from - 1 to 1V, relative to saturated calomel electrode). It can be made into cylindrical, disc and other electrode shapes. It can also be used as the matrix to make mercury film glassy carbon electrode and chemically modified electrode.
  • 3.Glassy carbon electrode is one of the widely used working electrodes. It is a good inert electrode with good conductivity, high hardness, high finish, high hydrogen overpotential, wide polarization range and chemical stability. It can be used as inert electrode for anodic stripping, voltammetric determination of cathode and variable valence ions, and can also be used as chemically modified electrode.
  • 4.The glassy carbon surface must be mirror and clean. Since the surface of glassy carbon is easily polluted....
Check Stock

Copper Anode-1 Inch X 6 Inches X 0.04 Inch （19 GA）99.95% Pure Copper Electrode Sheet for DIY Copper Plating and Copper Electroplating, High Purity Copper Electrode

  • HIGH PURITY COPPER---- This copper electrode has a copper content of 99.95% giving it a pure copper rating..
  • SIZE----6'' x 1'' x 0.04''(152mm x 25mm x 1mm), 6 inch long, 1 inch wide and 0.04 inch thick. Please refer to the picture to get the detail parameters..
  • SATISFACTION GUARANTEE: Our pure copper anode comes with a one year satisfaction guarantee. Please contact our customer support team with any questions or issues that you may have. They will be more than happy to assist you..
Check Stock

Pure Copper Anode 2 Pcs, 3.93 x 0.79 x 0.04 Inch (19 GA) 99.95% High Purity Copper Electrode Strips, Pure Copper Sheet for Copper Plating and Copper Electroplating

  • HIGH PURITY COPPER---- This copper electrode has a copper content of 99.95% giving it a pure copper rating..
  • SIZE----3.93''x 0.79''x 0.04''(100mm x 20mm x 1mm), 3.93 inch long, 0.79 inch wide and 0.04 inch thick. Please refer to the picture to get the detail parameters..
  • SATISFACTION GUARANTEE: Our pure copper anode comes with a one year satisfaction guarantee. Please contact our customer support team with any questions or issues that you may have. They will be more than happy to assist you..
Check Stock

Denso (3297) SK20R11 Spark Plugs, Pack of 4

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Forney - 85657 9FV TIG Torch

  • TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
  • AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
  • COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
  • PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
  • INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.
Check Stock

SK20HR11 3421 Iridium Spark Plugs Replacement For Lexus GX460 Toyota Benz Tundra SET (8)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

www.solarionizer.com Replacement Anode Guaranteed to fit Remington Solar (See Image 3) | Anode Dimensions (See Image 2) | Free: 1 Wing Screw and 1 Basket

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. (1.) Anode dimensions listed on image (2.) Anode will ONLY fit with heavy duty wing-screw provided with anode for durability (3.) Anode cannot be rotated because thread sizes optimized for durability.
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace an anode with more than 80% of the anode remaining. CONTACT HILLTOP SOLAR customer service to inquire if anode replacement is needed, prior to purchasing an anode. WE SAVE YOU MONEY!!.
  • DO NOT CLEAN ANODE: Any brand of Solar Ionizer unit automatically cleans the anode during ionization process. Power from a solar ionizer is applied at center of anode that cannot be cleaned. Cleaning on outside of an anode with any abrasive materials, will result with NO BENEFITS other than: 1. Frequent anode replacements 2. Significantly increase costs ....
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Solar Ionizer Replacement Anode/Mineral Electrode Compatible with Floatron - 1 Anode |1 Basket | 1 Wing-Screw

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. 1.) Anode dimensions are optimized for maximum ions in water to reduce chlorine use 2) Each anode may last 12 to 15 months. 3.) Guaranteed to fit Floatron brand (see image 2). Bigger anode causes unit to be inoperative majority of time due to insufficient clearance between coil and anode. Hilltop Solar anodes save money on chlorine and pool operating costs. ..
  • HIGH PERFORMANCE ANODE (Exclusive to Hilltop Solar): Extremely pure copper (greater than 99.95%) with silver with no impurities. Hilltop Solar anodes contain billions of copper-silver ions per anode and designed to maximize ionization capacity to add maximum possible ions into water to save on chlorine. Anode, basket and wing-screw guaranteed to fit floatron branded solar ionizer unit..
  • DO NOT CLEAN ANODE: Solar Ionizer unit cleans the anode automatically during the ionization process. Wattage from solar ionizer is applied at center of anode and this cannot be cleaned. Therefore cleaning the outside an anode with any abrasive materials, the following results with NO BENEFITS will occur: 1. Frequent anode replacements 2. Significantly increase costs due to wasted mineral ions 3. D....
Check Stock

Replacement Anode High Performance (Read Description Before Buy) | Anode Dimensions - See Image 2 | Guaranteed to fit Remington Solar (See 3rd Image) | Copper-Silver(99.95% Pure) | Saves Chlorine

  • NOTE TO BUYERS - See Image 5: Competitors and Amazon Customers who do not read are posting false and misleading details on Amazon product reviews, that is not validated by Amazon . See image 5 for more details..
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace the anode with more than 80% mineral remaining on old anode. Anodes are sacrificial, and designed to degrade. If anode is looking new or barely degraded, Solar ionizer unit is inoperative. Solar ionizer unit will always ionize regardless anode condition, as long it is installed on unit. Common misconception to replace anode to get solar ionizer to function is an INCORRECT PROCEDURE..
  • DO NOT CLEAN ANODE: Any Solar Ionizer automatically cleans the anode during ionization process. Power from solar panel is applied at center of an anode that cannot be cleaned. Cleaning outside an anode with abrasive material(s), will result in NO BENEFITS other than:....
Check Stock