Reviews Titanium Cutting End Mills

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

  • TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
  • POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
  • SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
  • 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
  • HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

RedLine Tools - 3/32 (.0938) Single End Corner Radius Carbide End Mill, Amorphous Diamond Coated Coated, 3 Flute .1390 LOC .0150 Radius, Round Shank Type, 2.5000 OAL - RET7934

  • 3 flute design for smoother/quieter milling operations High Performance ideal for pocketing steel, titanium and exotic alloys Ideal for long reach peripheral milling Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

YG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

  • Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
  • Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Check Stock

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.
Check Stock

MNKNENG 8 Set 1/4 inch End Mill Bits 4 Flute Straight Milling Cutter HSS-AL CNC Square Nose End Mill Bits Straight Shank Drill Bits for Wood, Steel, Titanium(6.35mm,4T) 1

  • Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
  • Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
  • Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
  • Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
  • Durable, high precision and not easy to break.
  • easy installation and improved work efficiency..
  • Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
  • Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Niagara Cutter - CM490-0.250-D1-C.0-Z4 17004752 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 1/8 Cut Cutting Length 1/4 Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CM460-0.500-D1-C.0-Z4 17004750 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16' Cut Cutting Length, 1/2' Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock