Reviews Timing Sprocket Puller

ARES 70074 - 2-Piece Fan Clutch Wrench Set - 32mm Fan Clutch Nut Wrench - Water Pump Holder Removal Tool Kit

  • 【Water Pump Sprocket Holder Tool】The water pump sprocket holder tool can hold the timing chain in place so that the water pump can be removed for maintenance. The full-circle structure of the tool can well hold everything in place, avoid camshaft readjustment, and keep parts from falling into the timing chain cover..
  • 【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life..
  • 【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
  • 【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
  • 【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engi....
Check Stock

Garage-Pro Aftermarket Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma 16 Valves DOHC 3RZFE Eng.

  • Direct Replacement Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma.
  • Direct Replacement Timing Chain Kit Compatible with 1996-2000 Toyota 4Runner and 1994-1998 Toyota T100.
  • Garage-Pro JCWREPT300103GP Features: Kit, With Sprocket (Gear), (1) Timing Chain, (1) Balance Shaft Chain, (1) Camshaft Sprocket, (1) Crankshaft....
  • Timing Chain Kit Interchangeable With: TK939, 94196S.
  • A high quality, Direct Fit OE Replacement Timing Chain Kit, with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items purchased thru....
Check Stock

A-Premium Timing Chain Kit Compatible with Mini Cooper R56 Series 2007-2012 L4 1.6L DOHC Turbocharged

  • 【Vehicle Fitment】Compatible with Mini Cooper 2007-2012 R56 Series, Fit DOHC Engine Only.
  • 【Kit Contents】1x Timing Chain Tensioner.
  • 【Importance of Parts】The timing chain is an important part of the engine valve system. It is highly recommended to replace the entire system when repairs in order to reduced friction, and make smoother operation and more safer driving..
  • 【Buy with Confidence】OE replacement Timing Chain Kit, easy to install. We will extremely provide you the good shopping experience. If the product has any quality problem, please contact us timely, and we will give you a satisfactory answer within 24 hours..
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 9-0773S, 90773S, 3-1056S, 31056S, TK828, 76268.
Check Stock

FINDAUTO Engine Timing Kit Chain Kit replacement for 2008-2013 06K109467 Audi A3 Quattro A4 allroad A5 A6 allroad TT vw 2.0L

  • 【Vehicle Fitment】Compatible with Mini Cooper 2007-2012 R56 Series, Fit DOHC Engine Only.
  • 【Kit Contents】1x Timing Chain Tensioner.
  • 【Importance of Parts】The timing chain is an important part of the engine valve system. It is highly recommended to replace the entire system when repairs in order to reduced friction, and make smoother operation and more safer driving..
  • 【Buy with Confidence】OE replacement Timing Chain Kit, easy to install. We will extremely provide you the good shopping experience. If the product has any quality problem, please contact us timely, and we will give you a satisfactory answer within 24 hours..
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 9-0773S, 90773S, 3-1056S, 31056S, TK828, 76268.
Check Stock

Engine Timing Chain Kit Cam Phaser Camshaft Drive Phaser Repair Kit 3R2Z-6A257-DA For 2004 2013 5.4L 3V 24 Valve Triton Ford Expedition, F-150, F-250, F-350 Super Duty, Lincoln Mark LT, Navigator

  • 【Vehicle Fitment】Compatible with Mini Cooper 2007-2012 R56 Series, Fit DOHC Engine Only.
  • 【Kit Contents】1x Timing Chain Tensioner.
  • 【Importance of Parts】The timing chain is an important part of the engine valve system. It is highly recommended to replace the entire system when repairs in order to reduced friction, and make smoother operation and more safer driving..
  • 【Buy with Confidence】OE replacement Timing Chain Kit, easy to install. We will extremely provide you the good shopping experience. If the product has any quality problem, please contact us timely, and we will give you a satisfactory answer within 24 hours..
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 9-0773S, 90773S, 3-1056S, 31056S, TK828, 76268.
Check Stock

DNJ TK1116B Timing Chain Kit for 2009-2010 / Chrysler, Dodge / 300, Avenger, Charger, Sebring / 2.7L / DOHC / V6 / 24V / 167cid

  • C5R GM Timing Chain Set LS1 LS2 LS3 LS6 LM7 LQ4 4.8 5.3 5.7 6.0 6.2 7.0.
  • This is the same chain used in the C5-R and C6-R racing engines built by Katech..
  • Never broken in all of C5-R racing and durability testing.
  • Fits all Gen 3 and 4 GM LS-based engines.
  • GM 3 bolt cam sprocket (58X), 12586481GM Crank Sprocket 12556582, C5-R Timing Chain, Timing chain dampener 12588670, ARP cam bolts 134-1003.
Check Stock

AEM 23-831BK Black Tru-Time Adjustable Cam Gear

  • Easy to install: Direct to replacement for a proper fit every time, friction resistant and durable.
  • Premium Quality: Variable Valve Timing (VVT) Sprocket 917-259 with premium quality material, ensure the product quality, bring you a smooth experience..
  • Package Contents: 1 set Variable Valve Timing (VVT) Sprocket 917-259.
  • Replace Part Number: 917-259,13070-36011.
  • Our products use German imported accessories with international certification, and enjoy a Five-year warranty to ensure the durability, safety and accuracy of the accessories.
Check Stock

MAYASAF TKC8003 Engine Timing Chain Kit w/ Original Equipment Replacement Timing Chain Sets, Cam Sprocket, and Tensioners for Select Ford Truck Models

  • Original equipment manufacturer timing chain kit allows for a safe and purpose-built replacement for select Ford truck models..
  • Easily installs into your truck and remains entirely compatible with existing equipment for a reliable replacement..
  • Utilizes the latest in design and material technology to bring you an ideal, highly-compatible part for your vehicle..
  • Package includes: 2 timing chains, 1 cam sprocket left, 1 cam sprocket right, 1 crank sprocket (double row 21 teeth), 2 tensioners, and 4 guide rails..
  • Compatible with select Ford and Lincoln pickup truck models.
  • Check with the manufacturer to ensure a proper fit..
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock