Reviews Timber Lumber

Makita 5402NA 16-5/16" Circular Saw

  • Powerful 15 AMP motor delivers 2,300 RPM for enough power to cut through pressure treated lumber.
  • Cuts 6x material at 90° and 4x material at 45° in a single pass.
  • Weighs only 32.1 lbs. for increased operator comfort.
  • Ideal for cutting large timber, pressure treated lumber and wood logs.
Check Stock

SOMADA 3/4-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 3/8-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

  • 3/4" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank.
  • Made of Carbon Steel. Solid Center Design for extra rigidity while boring..
  • Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, Tree stump boring, Drilling Vigas for building Pergola for up to 10” deep hole. Easy to bore into a tree stump, lumber, landscape timber, vigas, and railroad ties..
  • Self Feeding Coarse screw point desgined for faster drilling. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.
  • The cutting flute is milled with hollow centers for faster chip clearance.
Check Stock

SOMADA 1-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 7/16-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

  • 1" Diameter X 12" Long Auger Drill Bit with a 7/16" Hex Shank.
  • Made of Carbon Steel. Solid Center Design for extra rigidity while boring..
  • Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Installing PVC pipes, Tree stump boring, for up to 10” deep hole. Easy to bore into tree stump, lumber, landscape timber, vigas and railroad ties..
  • Self Feeding Coarse screw point desgined for faster drilling. Single-spur cutting edge scribes the circumference of the hole for a smoother finish..
  • The cutting flute is milled with hollow centers for faster chip clearance. 100% satisfaction guarantee by our customer service team. SOMADA is a US brand..
Check Stock

SOMADA 1/2-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 3/8-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

  • 1/2" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank.
  • Made of Carbon Steel. Solid Center Design for extra rigidity while boring..
  • Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, tree stump boring, for up to 10” deep hole. Easy to bore into tree stump, lumber, landscape timber and railroad ties..
  • Self Feeding Coarse screw point desgined for faster drilling. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. A perfect 12 inch drill bit for so many DIY projects..
  • The cutting flute is milled with hollow centers for faster chip clearance.
Check Stock

Carmel Lumber Crayon Pro, Box of 12 (Black), Lumber Marking Crayon, Lumber Marker, Keel Crayon, high-Density Clay Based Paint Crayon, Ideal for Marking on Wood, Lumber, Timber

  • LUMBER CRAYON - This specialized crayon applies vivid markings on lumber..
  • APPLICATIONS - The lumber industry primarily uses this marking tool for marking wood..
  • SURFACE USE - This crayon marks on all types of wood, such as lumber, timber, treated, and untreated wood..
  • TWO TYPES - The lumber crayon comes in regular, standard grade for general-use marking and works well in cold climates. The pro is a hard, clay-based formulation. It is extruded for maximum strength & adhesion..
  • TWO SIZES - Regular - 4 ½” x ½” hex (11.43 x 1.27 cm).
  • X-long - 5 ½” (13.97 cm) Size: 5 ½” x ½” hex (13.97 x 1.27 cm). 1 inch longer than 4 ½” inch crayons..
Check Stock

SOMADA 3/8-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 3/8-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

  • 3/8" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank.
  • Made of Carbon Steel. Solid Center Design for extra rigidity while boring..
  • Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, Tree stump boring, Drilling Vigas for building Pergola for up to 10” deep hole. Easy to bore into a tree stump, lumber, landscape timber, vigas, and railroad ties..
  • Self Feeding Coarse screw point desgined for faster drilling. Single-spur cutting edge scribes the circumference of the hole for a smoother finish.
  • The cutting flute is milled with hollow centers for faster chip clearance. 100% satisfaction guarantee by our customer service team. SOMADA is a US brand..
Check Stock

OZCO 56637 Laredo Sunset 8-inch Post to Beam Bolt Inline Connector, (2 per Pack)

  • (4) 2-3/4-inch OWT Timber Screws for bottom hole placement only.
  • Four OWT Timber Bolts are required and sold separately.
  • Approved for use with ACQ treated lumber.
  • Rest the heavy beam on the ledge while you secure the bolts.
  • Material constructed of 3/16-inch galvanized steel with a beautiful black powder coated finish.
  • Recommended for roofs, larger pavilions, pergolas and rafters.
Check Stock

6Pcs Concealed-Flange Light Joist Hanger Inner Width - 50mm）Actual Size 2 x4 ,14 Gauge Steel Concealed Joist Hanger

  • Material:Carbon steel Q235B , surface baking finish, wear resistance, corrosion resistance.
  • 2 types of screw holes: φ5mm (6 pcs), φ8mm (2 pcs).
  • Note: screws are not included. Not applicable for 1.5" x 3.5"Laminated timber，only for raw lumber or unfinished lumber.
Check Stock

Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45

  • TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
  • FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
  • EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
  • STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
  • SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..
Check Stock

Plywood Carrier Tool, Newdeli Lift Plywood Carrier, Heavy Duty Metal Aluminum Alloy Gripper, Drywall Hand Clamps Tools with Single Hand for Carpenter

  • [Heft Logs with Ease]: Use the Felled Logging Grabber Lumber Grapple Logging Claw for dragging and lifting logs.
  • Pole lifting tongs will grip tighter the more it is pulled.
  • Efficiently lift large and small logs with this lifting grapple timber grapple.
  • [Industrial Strength]: Save your back the stress and pain of lifting logs by yourself.
  • Lumber tongs have a lifting capacity of 3,000 pounds (1,360kg).
  • Log lifting hook includes 4 angled claw points and an opening range from 4 inches (10cm) to 28 inches (71cm).
  • [Built to Last]: No need to worry about this logging claw grapple tongs bending or breaking while in use.
  • Wood logging hook timber grabber claw is constructed of durable carbon steel.
  • Grapple hook features red powder-coated finish.
  • [For Your Vehicle]: Skidding tongs are designed with your workspace in mind.
  • Connect this log lifter to your truck, skidder, ATV, tractor, and other vehicles.
  • Ring of the log hook grapple is 3/4 inches (1cm) thick with an inner diameter of 1.75 inches (4cm), outer diameter of 3.25 inches (8cm).
  • [Perfect Fit and Form]: Logging clamp stump grabber will help you lift and drag logs for clearing away trees and moving large firewood.
  • Log arch skidder weighs 20 pounds (9.5kg) with total dimensions of 28 x 12 x 2 inches (71 x 30 x....
Check Stock

Simond Store Logging Tong, 25 Inches, Swivel Grab Skidding Tongs with Ring for Logging Forestry Grappling Firewood Fire Log - Heavy Duty Steel Log Grabber (25 Inch)

  • [Heft Logs with Ease]: Use the Felled Logging Grabber Lumber Grapple Logging Claw for dragging and lifting logs.
  • Pole lifting tongs will grip tighter the more it is pulled.
  • Efficiently lift large and small logs with this lifting grapple timber grapple.
  • [Industrial Strength]: Save your back the stress and pain of lifting logs by yourself.
  • Lumber tongs have a lifting capacity of 3,000 pounds (1,360kg).
  • Log lifting hook includes 4 angled claw points and an opening range from 4 inches (10cm) to 28 inches (71cm).
  • [Built to Last]: No need to worry about this logging claw grapple tongs bending or breaking while in use.
  • Wood logging hook timber grabber claw is constructed of durable carbon steel.
  • Grapple hook features red powder-coated finish.
  • [For Your Vehicle]: Skidding tongs are designed with your workspace in mind.
  • Connect this log lifter to your truck, skidder, ATV, tractor, and other vehicles.
  • Ring of the log hook grapple is 3/4 inches (1cm) thick with an inner diameter of 1.75 inches (4cm), outer diameter of 3.25 inches (8cm).
  • [Perfect Fit and Form]: Logging clamp stump grabber will help you lift and drag logs for clearing away trees and moving large firewood.
  • Log arch skidder weighs 20 pounds (9.5kg) with total dimensions of 28 x 12 x 2 inches (71 x 30 x....
Check Stock

ALASKAN Granberg Chain Saw Mill, Model# G777, Orange, Silver

  • Lightweight mill can access nearly all timber.
  • High-quality mill cuts beams or lumber from 1/2in. To 13in. Thick and 17in. Wide.
  • Designed to fit chain saws with 20in or less bars.
Check Stock

Alaskan Mark-IV Chainsaw Mill - (48')

  • Comes with 12ft of V rail as a cutting guide.
  • Fits Chainsaws with bars of 16-36” and 50-70cc or more displacement.
  • Square logs to make beams for timber frame construction.
  • Cut beams to precise lengths and widths for flooring, siding or trim.
  • Make plunge cuts to make dimensional lumber in conjunction with Granbergs Alaskan chainsaw Mill.
Check Stock