Reviews Tile Hole Cutter

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

ABN Tile & Mosaic Nipper, Cutter Pliers with Carbide Trimming Tips

  • [Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter.
  • Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more.
  • [For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts.
  • Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework.
  • [Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity.
  • No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure.
  • [Comfort Grip]: Tile cutter includes soft rubber coated handle grips.
  • Tile hand cutter wall tile cutter handle ensures control while in use so that there will be no slips while in use.
  • Handles measure 8 inches (20cm) in length.
  • [Measurements]: The sharp, straight carbide-tipped ends of the manual ceramic cutter have a cutting surface of over 3/4 inches (1.9cm) for tile.
  • Ceramic tile cutter tools spans up to 1/2 inches (1.27cm)....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • ...For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To Cool The Material, This Will Also Pevent Heat Build Up In The Diamond Bits..
  • Use As Granite Drill Bit With Drill Guide, With The Diamond Drill Bits Ceramic Glass Porcelain And Granite Can Be Drilled Through As Long As The Bits Are Kept Cool. Do Not Spray Water Onto Side Of Porcelain Drill Bit Set As That Only Keeps The Side Of The Glass Drilling Bits Cool, You Must Remove Glass Tile Drill Bit From Hole And Dip In Water To Cool..
Check Stock

Diamond Hole Saw Cutter Tools Coated Drill Bit Angle Grinder Hole Opener for Ceramic Marble Stone Glass(60mm), Hole Saw

  • PREMIUM DIAMOND MATERIAL: Hole saw cutter tools is made of premium diamond material with high hardness, so it is durable in use..
  • HIGH DRILLING SPEED: Diamond hole saw has high drilling speed, neat and smooth opening, and has no broken edges..
  • SPECIAL DESIGN: Chip removal hole design reduces cutting resistance for easier drilling, it effectively improves work efficiency..
  • PAINT SPRAYING TREATMENT: Paint spraying treatment can avoid rusting of the drill bit..
  • SCOPE OF APPLICATION: Diamond hole saw is suitable for opening and coring of marble, stone, vitrified tile, ceramic tile, etc..
Check Stock

Goplus 36-Inch Manual Tile Cutter, Professional Tile Cutter with Tungsten Carbide Cutting Wheel, Anti-sliding Rubber Surface and Removable Scale, Suitable for Ceramic Floor, Ceiling Tiles

  • 【Powerful Cutting System】This tile cutter has tungsten carbide cutting wheel for smooth cutting and durable. This 36inch tile cutter equipped with deep groove ball bearings, which is higher than other normal strengths to ensure perfect sliding. The 1650 LBS pressure of manual tile cutter makes cutting easier and more labor-saving..
  • 【Support Accurate Multi-angle Cutting】Equipped with a high-precision ruler, this porcelain tile cutter can perform parallel and angled cutting (from 0 ° to 60 °) and suits all kinds of tiles. With a stretchable scale, the tile cutter hand tool can cut a tile which is maximum size of 36 inches and maximum thickness of 0.5-inch (14 mm)..
  • 【Stable and Premium Frame】Made of heavy iron material, the 36 inch tile cutter is sturdy and the solid I-shaped tack does not deform. The wide and thick base, non-slip rubber pad and telescopic stand provide additional stability for larger tiles. The protective covers on the bottom provide stability while protecting the ground and ceramic tile cutter..
  • 【Ergonomic and Comfortable Handle】Curved and extended handle is designed according to users’ habits, which make cutting operation easier. Meanwhile, the non-slip plastic on the handle surface increases the comfort sense during....
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Keadic Glass Tile Cutter Tool Kit, Glass Breaking Pliers, Tile Cutter Hand Tools Set with 6mm Alloy Steel Blades, Spacers, Special Oil Bottles Tape Measure & Cut-resistant Gloves

  • Complete Glass & Tile Cutter Tools Set --- In this easy glide glass & tile cutter hand tools kit, you can get 1 glass tile cutter & 2 pieces 6mm premium alloy steel blades, 1 glass breaking plier & 3 spare spacers, 2 special oil bottles, 1 meassuring tape (1m/3 FT) and 1 pair of cutting-resistant gloves. Everything you need to cut glass, tile, mosaic, mirrors, diamond & minerals are included!.
  • Warm Tips --- The glass tile cutter tools can be used for cutting glass, mirrors, wall tiles, facing tiles, ordinary whole tiles, glazed tiles within 0.47 inches, but not for cutting whole body tiles, vitrified tiles, marble tiles and polished tiles. Please make sure that our cutter is suitable for your own tile type, to avoid affect your use..
  • Premium Glass Breaking Pliers --- Made of high grade steel, more durable and better rust-resistance, can be used to achieve a controlled break in the glass, tiles, resulting in a clean, right-angled cut edge. The extended swivel handle makes it easier for the user to release the force..
  • Steps of Cutting Glass/Tile --- Firstly, mark the cutting position with the meassure tape, then align the top of the glass or tile, use the glass cutter to cut a straight line with even force. Nextly, align the cut section of breaking plier ....
Check Stock

Marshalltown 17” Tile Cutter Cuts Ceramic Porcelain Mosaic Tile DIY TC17

  • The MARSHALLTOWN Tile Cutter is easy to use, portable, and dust-free, making it an ideal tool for DIYers.
  • This tile cutter is versatile and makes straight tile cuts to ceramic, porcelain, and mosaic tile up to 17 Inch long and a .5 Inch (12 mm) thick. You can also cut tile up to 12”x12” (305 x 305 mm) at a 45-degree angle for different tile installations..
  • This tiling tool has a two-rod rail system that allows smooth operation as the tungsten carbide scoring wheel scores the tile for quick, easy cuts. It also includes an adjustable measuring guide for precise cuts..
  • A durable 5/8 inch (15 mm) tungsten carbide scoring wheel is designed for performance. The tile cutter also includes an adjustable measuring guide for precise cuts..
Check Stock

ZELCAN Manual Tile Cutter, Hard Alloy Wheel Cutter with Ergonomic Handle for Porcelain Ceramic Tiles, Laser Guided Precision, Adjustable Measurement Ruler, Anti-Skid Feet (48 inch)

  • 48" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 48 inches straight and 33 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

Mosaic Tile Cutter Glass Tile Cutter Hand Tool Mosaic Tile Nipper Manual Mirror Cutter Plier for Home DIY Cutting Mosaic Glass Ceramic Mirror

  • ➤【Mosaic Tile Cutter 】The cutting wheel of mosaic tile nipper adopts high hardness tungsten carbide, with the characteristics of rust resistance and wear resistance..
  • ➤【Glass Tile Cutter Hand Tool】The TPR rubber handle allows you to hold and use it effortlessly, very suitable for DIY mosaic glass crafts, used for home improvement, kitchen and bathroom..
  • ➤【Wide Applications】Our tile cutter can cut and break glass or ceramic tiles with a max thickness of 9.5mm (0.37"), used for cutting mosaic, mirror, ceramic, porcelain, glass tile and stained glass quickly..
  • ➤【Easy to Use】1. Use the scoring wheel to draw scratches on glass or tiles. 2. Aligned the scratch with the middle part of glass cutting tool. 3. Break the tile or glass into two pieces..
  • ➤【What You Get】You will get 1pc manual tile cutter and 1 pair of gloves..
Check Stock

ZELCAN Manual Tile Cutter for Ceramic Tiles or Porcelain Tiles| For Professional, DIY, or Weekend Warriors| Adjustable Laser Guide for Precision Cutting| Anti-Skid Feet| Ergonomic Handle (40 inch)

  • 40" MANUAL TILE CUTTER: This tile cutter with adjustable stabilizer from Zelcan makes quick and easy work of your home improvement jobs, cutting clean and precise cuts up to 40 inches straight and 28 inches diagonally through ceramic, porcelain, granite, and other tiles up to 0.6 inches thick.
  • PRECISION SCORING: Our flooring tool features a cutting edge laser guide, built in caliper, and metal ridge that runs perfectly parallel to the path of the scoring wheel to ensure you cut your tiles with utmost precision.
  • SUPERIOR STABILITY: The two supporting feet swing out up to 180 degrees to keep everything securely balanced, while the rubber pad anchors ensure your tile cutter stays in place even with applied cutting force.
  • DURABLE CONSTRUCTION: This bathroom floor tile cutter's corrosion resistant steel rails, expertly designed bearings, and heavy duty aluminum base let you handle hassle-free retiling for years to come.
  • EASY OPERATION: Simply use the laser guide to line up your tile with the cutting wheel, score the tile by applying light pressure on the handle, and then gently apply more downward pressure until the tile snaps.
  • make the most your home or commercial space with the assist of Zelcan's manual flooring tile cutter!.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ... drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty arbor, 3pcs HSS drill bits and 1pcs hex wrench.
Check Stock

Montolit Masterpiuma 93P5 Power 5 Ergonomic Manual Tile Cutter 36" (93cm) Cutting Tool For Tough and Delicate Large Format Glass and Ceramic Tiles for Floor and Wall Tile Installation

  • Montolit tile cutter 93P5 is suitable for cutting tiles up to 36" in length, supports diagonal cutting up to 26"x26" in size, and can cut tiles up to 3/4" (2cm) thick.
  • The Montolit ceramic tile cutter frame is sized and structured in the points of greatest stress with the insertion of “reinforcement brackets” that optimize the machine's behavior for front cuts, thick cuts, or full-body porcelain..
  • The tile cutter hand tool features an oversized goniometric square that can rotate both to the right (+ 45 °) and to the left (- 45 °), allowing precise cuts at different angles.
  • An expanded ceramic cutter support surface or robust die-cast aluminum wings are perfectly integrated into the frames, ensuring improved support to large tiles with diagonal cuts without leaving the machine profile.
  • The tile cutter features a double trestle splitting, which can be closed for normal cuts and opened for cuts on the corner or for mosaic ceramic tile sheets.
Check Stock