Reviews Three Pieces Forging Steel

Playful Chef Safety Knife Set for Kids – 3 Knives Plastic Blades with Serrated Edges – Real Cooking Supplies for Boys & Girls – Safe for Little Hands Ages 5 & up

  • HIGH-QUALITY STAINLESS STEEL KNIFE SET - This practical chef knife set is is forged from German high-carbon stainless steel, creating a....
  • TRIPLE RIVETED ERGONOMIC HANDLE - Three rivets embedded in the handle reinforce and prevent the handle from coming out. The wooden handle of knife....
  • PRO KITCHEN KNIFE SET - 15 pieces multipurpose knives set for kitchen includes: 8" chef knife, 8" slicing knife,7" bread knife, 8" santoku knife, 6"....
  • KNIFE SET RUST PROOF- The precise forging process makes the steel finer-grained, making it stronger and harder. The unique delicate hammer pattern....
  • EASY TO CLEAN & STORAGE- The knives set with block is dishwasher safe, easy to maintain. Perfect for storage after washing and drying. All knives....
Check Stock

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Tojiro DP Damascus 3-piece Knife Set

  • Set Includes: 4" Paring Knife, 6" Utility Knife & 8.25" Gyuto/Chef's Knife.
  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
Check Stock

Toijro DP Damascus 7-inch (180mm) Nakiri Knife

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • Great for cutting vegetables making it easier to cut straight slices.
Check Stock

Tojiro Honesuki 6-inches ,Right

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of....
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • Serrated edges enable for effortless cutting through crusty or tough foods.
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Tojiro DP Damascus 4.5-inch Utility Knife

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of....
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • Use for paring, peeling and slicing small fruits and vegetables.
Check Stock

Tojiro DP Damascus 8.25-inch Chef s Knife

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of....
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • cleans vegetables, minces herbs, chops, etc.
Check Stock

PoLe.Craft Life Hunting Knife Forged Boning Knife Cleaver 7-Inch - Wilderness Kitchen Knife - Forged 1095 High Carbon Steel 60HRC,For Outdoor Kitchen Cooking Camping with Sheath

  • ✅Forged USA1095 High Carbon Steel - Sharp and Durable: This is a classic and practical butcher knife. It is made of USA1095 high carbon steel through manual forging process. 1095 high-carbon steel is a special steel for professional knives in the United States. It has excellent cutting performance. The chopping knife made by the forging process have higher hardness and excellent toughness. And there is a natural carbonized layer on its surface, which can protect the hunting knife from rust..
  • ✅Chopping and Cutting Dual Purpose - Classic-Sharp-Practical: This kitchen knife has been carefully optimized in shape, moderate in size, moderate in weight and good in hand. It is very suitable for chefs to slaughter, chop bones, cut meat, fish, etc. You can cut meat or chop bones, one knife is multi-purpose, convenient and practical. With high-quality leather knife sheath, it is very suitable for outdoor camping and carrying..
  • ✅Handle Is Ergonomically Designed: The forged butcher knife has an ergonomic handle shape, the handle is full, and the grip is comfortable. Even in a humid environment, it can be held firmly without slipping. The integrated handle is not welded and is fixed by three stainless steel rivets, which is very firm..
Check Stock

Vertical Plate Lifting Clamp 3T - Industrial Steel Hoist Hook Chain 6614lbs Jaw Opening up to 1.2 Inch for Lifting and Transporting

  • Stainless steel forging, body casting process.
  • High-frequency quenching of jaws, wear-resistant.
Check Stock

Kitory Meat Cleaver Chinese Longquan Kitchen Knife Forged Chef Knife & Black Knife Block Knife Storage

  • ...ull tang wooden handle holds comfortable and prevents from slippery effectively.Triple-riveted for sure comfortable grip and absolute stability..
  • 【Handmade Forged Technology】 The bones cutting knife are forged by hand. In order to manufacture superior knives, we have up to 40 procedures and a unique special cold forging process. The processed knives can not only keep the blade particularly sharp, but also have strong corrosion resistance, hot forging process greatly improves the durability and toughness..
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

CBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock