Reviews Three Phase Voltage Regulator
Garosa Voltage Monitoring Relay, Overvoltage Undervoltage Monitoring Sequence Protector with LED Lights, 480VAC
- 【Item Main Purpose】This phase sequence protector is mainly used for various fault detection of 3-phase voltage.not easy to be damaged, can be used for a long time without worry..
- 【5 Indicators To Indicate】Normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage.We fully guarantee the quality of our products.Please rest assured to buy our items..
- 【Full-Featured】It integrates three-phase voltage display, over-voltage protection, under-voltage protection, phase-gap protection (phase-break protection), three-phase voltage unbalance protection, phase sequence protection (phase-staggered protection) and acoustooptic alarm..
- 【Installation Method】The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- 【Application Scenarios】This phase sequence protector is widely used in air compressor, motor distribution box, pump, central air conditioning units, power distribution cabinet, crane, etc.Safety using. If you still have any questions, please send us emails, we're available 24 hours..
Check StockSiemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage
- 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
- PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
- REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
- VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
- IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check StockAutomatic Voltage Regulator, 40-150V AC R448 AVR Generator Automatic Voltage Regulator Genset Exact Generic Replacement for 5000/6000/7000 Series
- ➤【Feature】- High-quality electronic components ensure stable performance.The voltage is automatically adjusted to meet your needs..
- ➤【AVR】- The Automatic Voltage Regulator (AVR) is an advanced electronic component that provides closed-loop control of the generator’s output voltage..
- ➤【Parameter】- R448, Detection input Voltage 95-480V AC, Input powerVoltage 40-150V AC three-phase. Voltage 120V AC. Input maximum 160V DC. Power supply maximum 10A..
- ➤【High Precision】- This product is very practical generator accessories. Adjust voltage with high precision, RMS is less than ±0.5%..
- ➤【Note】- The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product..
Check Stock3 Phase Voltage Monitoring Sequence Relay JVR800-2 Voltage Protection Relay Under Over Voltage Protector
- The Composition of This Product: Three-phase voltage protector, chronograph and counter are integrated in one relay..
- Function: This voltage protection relay has overvoltage, undervoltage, phase loss, phase sequence and unbalanced three-phase voltage protection..
- Practicality: This 3-phase voltage relay does not require an external power supply. Has practical functions: power delay, output test, etc.
- 2 rest modules are optional, manual and automatic..
- The LCD can display data for easy reading..
Check StockOmron K8DS-PH1 Phase Monitoring Relay
- The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
- Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
- Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
- Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check Stock10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat
- 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
- 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
- 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
- Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
Check StockSimran Power Converter Regulator Stabilizer with 110 Volt - 220/240 Volt Built-in Voltage Transformer, 20,000W (AR-20000)
- 20,000 Watt Regulator with built-in 110v-240v voltage transformer. Note this transformer will not work with 2-Phase 220/240 Volt power.
- Converts 110/120V to 220/240V or converts Single Phase 220/240V to 110/120V. Compatible with 50hz/60hz.
- This stabilizer can regulate big range fluctuating voltage into general voltage output.
- Input voltage AC 75V-130V or 180V-260V. Output voltage: AC 110v+-4% or ac220v+-260v.
- 5 outlets on front of unit (accept US plugs and 2 prong Euro plugs). on/off switch. Thermal fuse - protects damage to your valuable equipment. Comes with terminal connectors - hardwire input required.
Check Stock1Pcs Photocell Cap,TwistLock Photocell Shorting Cap,Photo Control Sensor Receptacle with Surge Protection,Dusk to Dawn 3 Prong Bypass Cap
- ◆ Function: phase sequence detection, live line check, simple performance check, live cable identification, phase loss assessment, search for cable break position, detection of DC line break point, line maintenance.
- ◆ Non-Contact Inspection: Non-contact inductive measurement of the terminal type without opening the cable, without touching the exposed high voltage fire cable, with the three highly insulated super inductive terminals inserted directly into the cable insulation skin 3-phase live detection for safe and quick productivity..
- ◆ Positive and Negative Phase: With the LED display, dynamic sound and light perfectly show the positive or negative phase of the phase sequence of the three-phase power supply, which can be seen at a glance..
- ◆ Magnetic base: The base plate of the instrument is equipped with 4 magnets that can stand a quality of 800 g. They can be attached to the metal case of the device during the test, and it is convenient and convenient to use..
- ◆ Wide Voltage Test: This phase meter can detect three-phase voltages from 70V to 1000V and has excellent performance..
Check StockSiemens 3UG4631-1AA30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24VAC/DC Auxiliary Voltage
- Features: Undervoltage protector integrates three-phase voltage protector, chronograph and counter in one.
- Multifunction: The protection relay has protection functions such as overvoltage, undervoltage, phase loss, phase sequence, three-phase voltage unbalance, etc.
- Practical functions: The voltage monitoring relay has functions such as start-up delay and output test. 2 rest module optional, manual and automatic.
- Specification: Monitoring Circuit: L1, L2, L3.
- LCD Display: LCD data display, easy to read, no external power supply required.
Check StockPRINCE CASTLE Drive Motor Assembly 87-028AS
- ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
- 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
- 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
- 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
- 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check StockDigital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag
- It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
- Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
- Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
- PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
- It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check StockPhase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool
- It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
- Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
- PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
- Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
- It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check StockSZCY LLC AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)
- Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!.
- Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume..
- The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage..
- The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!.
Check Stock