Reviews Three Phase Asynchronous Motors
GOULDS Water Technology 10GBC10 High Pressure Multi Stage Booster Pump, 1 hp, Cast Iron, 1 Phase, Open Drip Proof Motor, 60 Hz, 115-230V, 10 Stage
- Multi-stage Design: Provides steady, quiet, vibration free, operation.
- O-Ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.
- Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available.
- Single phase motors have built-in capacitor and overload with automatic reset.
Check StockLAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series
- This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
- SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
- support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
- Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
- Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
- We are the original factory,any technical issues do not hesitate to contact us.
Check StockSiemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage
- 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
- PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
- REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
- VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
- IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check StockATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control
- ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
- Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
- 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
- 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
- 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check StockVFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)
- IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
- This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
- This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
- Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
- If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check StockFostex USA Fostex Desktop Headphone Amplifier with DAC Balanced Output HP-A4BL
- highly precise crystal with low phase noise.
- Playback 24bit/192kHz PCM and 11.2MHz DSD audio.
- high performance DAC (Barrbrown PCM1792A).
- Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0.
- HI/LO gain selection (10dB) for wider selection of headphones.
- digital filter selecting roll-off characteristics and cut-off frequencies.
Check StockGarosa Voltage Monitoring Relay, Overvoltage Undervoltage Monitoring Sequence Protector with LED Lights, 480VAC
- 【Item Main Purpose】This phase sequence protector is mainly used for various fault detection of 3-phase voltage.not easy to be damaged, can be used for a long time without worry..
- 【5 Indicators To Indicate】Normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage.We fully guarantee the quality of our products.Please rest assured to buy our items..
- 【Full-Featured】It integrates three-phase voltage display, over-voltage protection, under-voltage protection, phase-gap protection (phase-break protection), three-phase voltage unbalance protection, phase sequence protection (phase-staggered protection) and acoustooptic alarm..
- 【Installation Method】The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- 【Application Scenarios】This phase sequence protector is widely used in air compressor, motor distribution box, pump, central air conditioning units, power distribution cabinet, crane, etc.Safety using. If you still have any questions, please send us emails, we're available 24 hours..
Check Stock6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper
- Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
- Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
- Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
- Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
- Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check StockXtremepowerUS Aquarium Combo Koi Pond Water Aquarium 13W Lamp Filter & 110V 3200GPH Pump Set
- It is suitable for improving the water quality to provide a clear and healthy pond for your fish.
- Filter is made of high quality material and the outer covering is high strength, which is durable and waterproof. You can place it on the shore or underground. It can be used for a long time.
- 3200GPH pond pump is good for waterfalls, fountain, pond filtration systems, or any other pond application.
- Using with a high-performance single-phase capacitor running asynchronous motor, it completely waterproof and sealed, waterproof level IP68, and overheating protection.
- Package Contents: Koi Pond Filter, Inlet/Outlet Adapter, Pond Pump and Manual.
Check StockAOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino
- L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
- Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
- Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
- Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
- Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check StockDigital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag
- It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
- Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
- Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
- PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
- It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check StockPhase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool
- It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
- Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
- PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
- Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
- It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check StockOmron K8DS-PH1 Phase Monitoring Relay
- The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
- Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
- Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
- Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check Stock