Reviews Three Manifold Valve

Fieldpiece Sman Digital Manifold with Micron Gauge Sm380v

  • SMAN Manifold + Micron Gauge (3 Port) with Yellow Jacket 22985 hoses.
  • Package with SM380V and Yellow Jacket 22985 hoses.
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Digital Manifold Gauge Set, Vacuum Pressure Temperature Leakage Tester for Air Conditioning Systems and Heat Pumps, HT-750

  • Quick, accurate measurement of high and low pressure with two temperature compensated pressure sensors.
  • automatic measurements of the evaporation and condensation temperature.
  • 83 refrigerants stored in the instrument: just one instrument covers all the most important refrigerants and, depending on the refrigerant, there is no need for different manifolds.
  • Equipped with a large 2 line backlit display, 2 way valve block and a suspension hook, the HVAC/R instrument enables a convenient application.
  • Including 3 hoses (blue, red, yellow), each 35.4 Inch long, suitable for all common refrigerants.The rugged housing of the digital manifold includes a frame around the display, which protects the digital manifold from impact to provides a lasting performance.Complete kit: one Digital Manifold Gauge, three hoses, two pipe clamp temperature probes. and a hard shell case.
Check Stock

Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT

  • 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure....
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

Partman Fit for 190627GS 16031 Excell EXWGV

  • Pressure Washer Manifold Kit 16031 190627GS 190574GS.
  • Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
  • To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
  • Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

Fear

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Fieldpiece Job Link

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Life Is Predictable in Retrospect

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

Dorman 264-968 Engine Valve Cover Compatible with Select Buick/Cadillac/Chevrolet Models

  • Direct replacement - made from injection molded polymer for superior fit and heat resistance, this valve cover matches the original equipment part for fit and function.
  • Complete solution - this valve cover includes a new gasket and new bolts for a complete repair.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service.
  • Related repair - this valve cover often fails due to a faulty intake manifold.
  • also replace manifold if it is missing PCV valve.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock