Reviews Threaded Shank Carbide Burrs

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

WUWTOOLS Tungsten Carbide Rotary Burrs Set 1/4 Shank file bit 10PCS Double cut Rotary tool Die grinder Drill Accessories Metal Steel Wood Glass Plastic Stone DIY Carving Polishing Cutting Shaping

  • ♚PACKAGE DETAILS: 10pcs double cut solid carbide burr set with 1/4 inch shank. ◆RPM Recommendations：7000-35000.
  • ♚HIGH QUALITY MATERIAL - ◆ Made of tungsten carbide which boasts a level of hardness second to diamond on the planet. ◆ The durability is 10....
  • ♚DOUBLE CUT HEAD DESIGN- Double cut will leave a smoother finish due to producing smaller chips which makes it more suitable for wooden, plastic,....
  • ♚TUNGSTEN CARBIDE BURRS- Tungsten Carbide Rotary Burrs are widely used for cutting, shaping, grinding, sculpting, deburring, and chamfering of....
  • ♚EASY TO USE- The carbide burrs fit Makita, Fordom, Dewalt, Milwaukee, and most of the other rotary tools and grinders. Generally can be used with....
Check Stock

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

  • 【ALUMINUM CUT CARBIDE BURRS】: This set included 5pcs NF carbide rotary burr, standard aluma cut head with 1/4" shank, 3/8" head diameter, 3/4" flute length, 4.4” total length. NF Carbide Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials..
  • 【SINGLE CUT EDGE DESIGN】:The single cutting edge design provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off..
  • 【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
  • 【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
  • 【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service....
Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

  • These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
  • Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
  • Made with tungsten carbide and suitable for deburring and polishing..
  • Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
  • Individually packaged with a protective plastic tube..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 20 PC Double Cut Compatible with Dremel Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【This is a Essential Rotary Burr Set】These carbide rotary burr set include A, C, D, E, F, G, H, L, M and N type burrs. Made from Tungsten Carbide, can be used to process: iron, steel etc.. 1/8 inch shank 1/8 inch head diameter and 1/8 inch shank 1/4 inch head diameter. Total length: 45-50 mm( 1.77-2 inch)..
  • √【High efficiency and Practical】All burrs with 1/8" shank-compatible with Dremel or most rotary tools, accurate centering. The processing efficiency is higher than the manual file tool. 20 different types of carving kit drill bits, meet your different needs..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden product, plastic and some Soft Metal..
  • √【Hardness HRC70, Carbide Die Grinder Bits】Carbide burr set, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
Check Stock

Carbide Burrs Set 4pcs JESTUOUS 1/4 Inch Shank Diameter Aluminum Rotary Files Single Cutting Edge for Die Grinder Drilling Bits Metal Carving Engraving

  • Suitable for cutting aluminum , non-ferrous materials..
  • Carbide rotary burrs are made of solid tungsten carbide,sharp and durable..
  • Single cutting with 1/4 inch shank diameter..
  • Include 4 head types burrs:SA-3NF,SC-3NF,SD-3NF,SF-3NF..
Check Stock

uxcell Tungsten Carbide Rotary Files 1/4 Shank Single Cut Flame Shape Rotary Burrs Tool 10mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering

  • Specifications: Shank diameter: 6mm(1/4"), cutting edge diameter: 10mm(2/5"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

YUELUTOL Aluminum Cutting Bits Carbide Burr Set-10 Pieces With 3mm(1/8 inch) Shank Dia and 6 mm (1/4 Inch) Head Size For Die Grinder Bits Aluminum And Wood

  • 【Single Cut Carbide Burrs】:Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. Good for your wood carving, metalwork ,drilling and engraving..
  • 【Excellent Tungsten Carbide】:Made of heat-treated 100% raw material, long life and high durability. 10pcs Carbide Rotary Burr Set about 6mm Cut Dia, 3mm(1/8 inch) Shank, total length: approx. 45-50 mm fits dremel and most small rotary tools. Different shapes to meet your various needs..
  • 【High Working Efficiency】:This single-cut carbide bur is designed for use in general purpose applications on steel, cast iron, ferrous, and nonferrous metals. Speed is generally 6000-50000 rev / min, high flute finish for easy chip flow and fast stock removal..
  • 【Widely Application】:Easy to use, safe, reliable, economical and long service life. Widely used in machinery, automobile, ships, chemical, craft and more. Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect..
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Cylindrical Radius End Rotary Burrs Tool 3mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 3mm(1/8"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Alloy Steel Hard Metal Carving Polishing Engraving 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Drilling 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Top Flat Cylinder Rotary Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock