Reviews Threaded Nipple Fittings For Plumbing

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

1-1/4' 5-way Cross PVC Fitting Connector

  • DO NOT use these fittings for plumbing projects..
  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • 1-1/4" Fittings fit on 1-1/4" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...ch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 2 Inch (2.0) Grey/PVC / 5 FT

  • ...s. Create stunning designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔AUTHENTIC MALLEABLE IRON: Don't accept cheap imitations with CMI inc know that you are receiving Top quality High Industrial Grade Premium pipe. Feel the difference with weight and feel of our product.
  • ✔30-DAY MONEY BACK GUARANTEE: If you are not satisfied with our product please contact us and allow us the opportunity to resolve any issue you may have. Customer satisfaction is always our top priority..
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

1/2\x3\ Industrial Pipe, Home TZH 10 Pack Iron Pipe, Heavy Duty Pre-Cut Steel Pipe, Threaded Metal Pipe Nipple for Industrial Vintage Style DIY Project/Furniture/Shelving Decoration (1/2\x3\

  • ...s. Create stunning designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔30-DAY MONEY BACK GUARANTEE: If you are not satisfied with our product please contact us and allow us the opportunity to resolve any issue you may have. Customer satisfaction is always our top priority..
Check Stock

Pipe Décor 1½ in. x 8 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 4 Pack

  • ...s. Create stunning designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔ AUTHENTIC MALLEABLE IRON: Don't accept cheap imitations with CMI inc know that you are receiving Top quality High Industrial Grade Premium pipe. Feel the difference with weight and feel of our product.
  • ✔30-DAY MONEY BACK GUARANTEE: If you are not satisfied with our product please contact us and allow us the opportunity to resolve any issue you may have. Customer satisfaction is always our top priority..
Check Stock

Permatex 80045 Pipe Joint Compound, 16.2 oz. Bottle

  • Lubricates and seals threaded joints on water, oil and fuel lines.
  • Temperature Range: -65°F to 400°F (-54°C to 204°C).
  • Suggested Applications: Thread fittings, plumbing applications.
Check Stock

Dixon Valve & Coupling FM1515F Brass Fire Equipment, Hex Nipple, 1-1/2' NPT Female x 1-1/2' NST (NH) Male

  • Hex nipple for connecting two threaded pipes or fittings.
  • 1-1/2" NPT female connection and 1-1/2" NST male connection.
Check Stock

LIFEGARD Aquatics Standard Threaded Bulkhead Kit for Fish Aquariums – High-Impact Resistant PVC – Includes Bulkhead Fitting, Gasket, Lock Nut – Jet Black – 2 Inch

  • ELIMINATE AQUARIUM LEAKS: Eliminate the possibility of finding hidden cracks when filling aquariums with this double threaded bulkhead fitting kit from Lifegard Aquatics..
  • HIGH-IMPACT RESISTANT PVC BULKHEAD: Made with only the most durable and high-quality materials, this heavy wall bulkhead is molded with impact-resistant PVC and features a slip base..
  • JET BLACK BULKHEAD KIT: Properly attach plumbing to fish and coral aquariums with this bulkhead fitting kit that includes a jet black bulkhead fitting, gasket and lock nut..
  • MATCH ACRYLIC TANK BACKGROUNDS: Ensure plumbing is in place for your aquariums without distracting from the aesthetics with this Lifegard Aquatics double threaded bulkhead kit for fish aquariums and tanks..
  • YOUR GO-TO RESOURCE FOR AQUARIUM, POND & AQUACULTURE PRODUCTS: Lifegard Aquatics features an extensive line of high-quality aquaculture products that include fountains, pumps, bulkhead fittings and commercial aquatic and pond equipment. From crystal aquariums to full spectrum LED lighting, trust in Lifegard for all of your aquatic needs..
Check Stock