Reviews Threaded Fitting

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • ...T-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Home Intuition Outdoor Foam Faucet Cover, 3 Pack

  • Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included..
  • Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
  • Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water..
  • ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL..
  • Freeze Proof, Life Time Warranty against leak, crack or break..
Check Stock

Outus PVC Bulkhead Fitting Water Tank Connector for Rain Barrels, Aquariums, Ponds or Water Tanks (2 Inches)

  • Product size: 2 inches PVC bulkhead fitting, measures approx. 52 mm x 108 mm.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Please refer to the picture for the detailed size, and please make sure your barrel fits our product before purchasing.
  • Function: locking nut is reversed threaded.
  • The bulkhead fitting with 6 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: requires 3 inch hole saw to install.
  • Threaded from the front end, suitable for commercial and industrial use.
  • What you get: 1 piece oversized PVC bulkhead fitting in your package, efficient to use it on your water tank.
Check Stock

Class A Customs 25 Gallon Water Holding Tank NSF Approved T-2500

  • 25 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF FDA Approved & BPA FREE – Fresh & Drinking Water Safe.
  • WATER TANK MEASUREMENTS: 33 1/2” Longest Length (not including fittings) x 10” x 17” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement).
  • BUILT-IN FITTING: (TWO) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (TWO) ½ ” Dia screw in fittings (threaded female – NPT Standard).
  • NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
  • Great extra water storage in RV, pop-up camper, off road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item here in the US in Elkhart, Indiana. NSF paperwork readily available and NSF logo molded into the tank..
Check Stock

Renator Brass Rain Barrel Spigot Kit. Lead-Free Compliant. 3/4 Inch Quarter Turn Ball Valve. Rain Barrel Kit For Any Barrel Including 5 55 Gallon Drum Spigot Bucket. Spigot with Bulkhead Fitting, Tape

  • A QUALITY SPIGOT DESIGNED FOR MAXIMUM WATER FLOW. Make use of the water collected from your rain barrel easily and quickly. This spigot was specifically designed with a larger flow port to fully take advantage of water pressure in your rain barrel to produce superior water flow. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
Check Stock

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

  • A QUALITY SPIGOT FOR YOUR RAIN BARREL. Make use of the water collected from your rain barrel easily. This spigot is designed to provide a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
  • HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminu....
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

2 Pieces PVC Bulkhead Fitting for Rain Barrels, Aquariums, Water Tanks (3/4 Inch)

  • Function: locking nut is reversed threaded.
  • The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: one and done installation, threaded from the front end, commercial and industrial use.
  • You will get: 2 pieces PVC bulkhead fitting in your package, sufficient to use them on your water tanks and you can share them with your family and friends, they are good tools.
Check Stock

Icon 437 22-1/2\ x 18-1/2\ x 6\ Bottom Drain Holding Tank

  • Built-in reinforcements for mounting a toilet.
  • Includes: 3" Threaded Fitting, a 2" Slip Fitting and a 3"ID/7"OD Flange Fitting.
  • Features a bottom drain and an 8 gallon holding capacity.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...ch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

Right Angle SO-239 to 3/8 x 24 Threaded Antenna Mount Adapter

  • Right Angle SO-239 to 3/8" X 24 Threaded Antenna Mount Adapter.
Check Stock

1\ UNISEAL Flexible Tank Adapter (Bulkhead) - 2 Pack

  • Heavy duty bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium.
  • Stock color is jet black to match acrylic tank backgrounds. Trusted AM Brand Only Available By Encompass All!.
  • All kits contain: bulkhead fitting, gasket, lock nut.
Check Stock