Reviews Threaded Expansion Bolt

200 Pcs M8 Aircraft Expansion Bolts Anchors Plugs Screws Tube Pipe Expansion Screw for Gypsum Board Hollow Wall Curtain Wall Installation Fastener Hardware (Without Screws)

  • Easy to install.Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
  • Stainless steel finish offers rust protection.304 stainless steel concrete eye screws, good corrosion and rust protection. Wear-proof, shiny exterior finish offering ultra-high anti-scratch protection..
  • Used in concrete and masonry.Eye screws for concrete can carry up to 200 kg/441 lbs of external under-slung load..
  • Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole.
  • Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering,etc..
Check Stock

16PCS M8 Expansion Hook, Open Cup Hook Screw Expansion Heavy Duty Bolts 304 Stainless Steel Bolts Heavy Duty Concrete Hook for Wall Anchors, Brick

  • 【Material】Expansion Hook Bolt made of high quality 304 stainless steel. Strong wear-resisting, anti-corrosion and rust protection..
  • 【Maximum load 】304 Stainless Steel Bolts Hook, can approximately hold 500 lbs weight. Not use for overhead lifting..
  • 【Easy to lnstall】 Expansion hook m8 is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
  • 【Application】 Expansion Bolts Hook is suitable for concrete masonry, solid brickwork, ceiling, bathrooms, kitchens, fixed hammocks, swings, fences, doors and windows, rain sheds, air conditioning fixed, home decoration..
Check Stock

Reedny,Eyebolt Bolt Stainless Steel Wall Concrete Brick Anchor Expansion Bolts Ring Screw Eyes,Heavy Duty Anchor Fastener Eye Bolt M8 4 Pcs

  • ★【Package Content】4pcs Expansion Hook Bolts..
  • ★【Size】M8* 80 expansion bolt with eye ring anchor.Thread diameter: 8mm, length excluding ring: 80mm.Need to use 12mm/0.47" drill hole for drilling..
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

M8* 80mm Expansion Screw with Eye Ring Anchor Internal Eye Bolt Fastener 304 Stainless Steel 5 Pack (Ring Lifting Expansion Eyebolt M8* 80mm)

  • ★【Package Content】8pcs Expansion Hook Bolts..
  • ★【Size】M6* 80 expansion bolt with eye ring anchor.Thread diameter: 6mm, length excluding ring: 80mm.Need to use 10mm/0.39" drill hole for drilling.
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

Toilet Seat Anchor Kit, 2 Pack fits Kohler, Toto, and Various Others

  • ...e Stable】: The round hinge plate makes these toilet hole screws more stable, which is very suitable for use when your existing toilet accessories are loose. After installing these bolts, you don't have to worry about the loosening of the toilet seat..
  • ★【Hign Quality Anti- Rust Material】: The toilet seat bolt expansion ball is made of high-quality rubber, and the screw is made of stainless steel, the brass nut inside the bolt is anti-skid and anti-rust. Round hinge plates made of durable plastic will not rust and are better than metal washers..
  • ★【Flexible Rubber Bungs】:The flexible rubber plugs slide perfectly into the hole, and when you tighten the bolts, they will squeeze into the hole to ensure a tight fit and make it more convenient for you to use the toilet seat..
  • ★【Easy to Installation】:The rubber grommets in the kit have a threaded section so you can just push them into the holes in the top of the toilet pan and when you tighten the screw it expands and tightens itself into the hole, without the need of a bolt on the other end of the screw..
  • ★【Suitable for Most Toilet Seats 】: Expansion ball diameter: 1.8 cm/ 0.7 inch. Length: 4cm/1.57 inch. Suitable for 14-16mm hole for 2 toilet seats. Great for broken or old toilet seat ....
Check Stock

MroMax Expansion Lifting Eyebolt M10x60mm Eye Ring Bolt 3.54\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M6x80mm, please refer to the picture for detailed dimensions..
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable..
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe..
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air -conditioning fixed, home decoration, engineering, etc..
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall.. As long as the threaded part is long enough, the sleeve part will be deeper and stronger..
Check Stock

MroMax Expansion Lifting Eyebolt M12x80mm Eye Ring Bolt 4.72\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M8x80mm, please refer to the picture for detailed dimensions.003cbr003e.
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable.003cbr003e.
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe. 003cbr003e.
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air-conditioning fixed, home decoration, engineering, etc.003cbr003e.
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall. . As long as the threaded part is long enough, the sleeve part will be deeper and stronger.003cbr003e.
Check Stock

B/A Products 11-AH10 Weld on Anchor Hook, WLL 22,000 lb, 7 Height, 9 Width, 3 Length

  • Standard size M6 screw hooks ,easy to install..
  • 304 Stainless steel finish offers rust protection..
  • Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
  • Heavy duty hook screw bolts,they can approximately hold 120KG weight.
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

CONFAST 3/8\ Lag Shield Anchor Short (50 per Box)

  • Material:made of 304 stainless steel,anti-rust,corrosion resistance,can be use in humid environment.
  • Widely used： in fence, burglarproof doors and windows, canopy, air conditioning rack fixation, home decoration, engineering, etc. Expansion Bolt.
  • Good：Expansion bolt provides a secure hold in concrete, block, brick, and stone.
  • Package Includes:10 x Stainless Steel Expansion Bolt Fastener.
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock