Reviews Threaded End Steel Pipe

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Joywayus 2Pcs Stainless Steel Internal Hex Countersunk Thread Socket Pipe Plug 1/2"NPT Male

  • Male National Pipe Taper (NPT) threads for use with female threaded pipes.
  • It is a Silver tone internal Hex Head Pipe Connector that is for closing and terminating the end of a pipe..
  • Great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block.
Check Stock

3 Pack NPT 1/2"Male x G1/2" Female Brass Pipe Fitting Reducer Thread Adapter

  • Machined Brass material make it strongest construction for prolonged service life..
  • 1/2 inch NPT Male Pipe to 1/2 inch Female Pipe,3 pack adapter..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Brass adapter has a male NPT threaded end,Female G threaded end,and connects hoses or fittings of different types..
  • Suitable for bathroom&kitchen faucet connection, bathroom shower connection..
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe

  • Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe

  • Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

PTFE Plumbers Tape, VCELINK Industrial Water Sealant Thread Tape, 520\ Length, 1/2\ Width, Plumbing Teflon Tape for Shower Heads and Pipe Threads, White (2 Rolls）

  • VCELINK Teflon tape plumbing used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • Widely Applicable: Designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, showerheads, etc..
  • Good Quality: PTFE thread seal tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • Easy to use: Simply wrap the pipe tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • Packaging and after-sales: 2 Rolls 520" length by 1/2" width water sealant tape. The product provides worry-free 18-month warranty, and friendly customer service..
Check Stock

VCELINK Teflon PTFE Thread Seal Industrial Tape Plumbing for Shower Head, Pipe Sealing, Water Leaks, Stainless Steel, 520\ Length, 1/2\ Width, White (8 Rolls)

  • VCELINK PTFE Water Plumbers Thread Tape used to connect threaded pipes. A good solution for enhancing the tightness of pipes and stopping leaks..
  • Widely Applicable: Tape Plumbing is designed for home and threaded pipe applications. Working for both air and water, suitable for most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • Good Quality: Gas Teflon Tapes has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • Easy to use: Simply wrap the PTFE tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • Package and after-sales: 8 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

  • Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
  • Comes complete with stainless steel mounting hardware for a quality installation..
Check Stock