Reviews Threaded End Ball Valve

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

• ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
• There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

• 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
• Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
• 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
• Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
• IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

• Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
• Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
• Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
• Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
• NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

• Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
• Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
• Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
• Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
• NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..

Home Intuition Outdoor Foam Faucet Cover, 3 Pack

• Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included..
• Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
• Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water..
• ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL..
• Freeze Proof, Life Time Warranty against leak, crack or break..

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

• Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
• The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
• This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
• Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
• This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

• EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
• equipped with a 3/4 inch slip connection on each end.
• DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
• EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
• SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
• SAFETY: This ball valve complies with lead-free guidelines for potable water applications.

Futurama Volume Four

• TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and....
• SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical....
• MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The....
• LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25....
• WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure....

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

• TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
• TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
• TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
• when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
• TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
• EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
• BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
• SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
• COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..

Halotronics RV Water Valve Replacement Kit for Pedal-Flush Toilets - Sealand/Dometic 300, 301 310, 311, 320, 321 (Hardware Included)

• Features | This replacement kit includes all necessary parts to get your valve working properly..
• Design | This model is for use in Sealand/Dometic 300, 301, 311, 320, and 321 units. This valve is simple to use. Attach threaded spout to the outgoing water supply hose. Next, snap the opposite end into incoming water supply..
• Quality | Strong and durable ABS plastic ensures a perfect fit for your existing toilet’s hardware. The threaded spout screws in tight into your water line to protect from leaks, and is resistant to fractures..
• Installation | This valve is easy to install. All you need is a few simple tools. Simply place the product and screw down until secure. Once installed, this valve is easily removed and will not damage your toilet or water line..
• Specifications | Compatible with Sealand Dometic part #385311641 for toilets 300, 301, 310, 311, 320, 321. Included parts: water valve, hose clamp, and screw fasteners..

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

• It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
• 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
• Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
• Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
• Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
• Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

• ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
• ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
• ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
• ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
• ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
• easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..

HydroTools by Swimline Precision Male & Female Threaded Ball Valve for Pools