Reviews Threaded Chrome Pipe

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

DANCO Bathroom Tub Spout with Front Pull Up Diverter, Chrome Finish, 1-Pack (88052)

  • CLASSIC DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and has a versatile design that ONLY FITS A THREADED PIPE connection.
  • it DOES NOT FIT a copper pipe slip-fit connection.
  • CONNECTION SIZE: This Danco diverter tub spout has ½ in. IPS inside threads and will fit a 4 in. – 4-1/2 in. stub out from tiled wall.
  • DIVERTER INCLUDED: This tub spout includes a front diverter lift rod to allow water stream to flow downward into the tub or upward into showerhead.
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 in. reach.
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout, so it is important to measure your stub out nipple to ensure it is at least 4 in. long.
  • HASSLE-FREE INSTALLATION: You will need adjustable pliers and plumber sealing tape to help prevent leaks and provide a better seal during installation. (VIDEO SHOWS MODEL INSTALLATION NOT THE EXACT SAME PRODUCT).
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures.
Check Stock

DANCO Replacement Tub Spout with Diverter, Chrome, 5-Inch, Fitting 1/2-Inch or 3/4-Inch IPS, 1-Set (80765)

  • HASSLE-FREE INSTALLATION: You will need pipe thread tape, a flat head screwdriver, adjustable pliers and a Philips screwdriver.
  • CHROME FINISH resists corrosion and tarnishing while creating a bright, refreshing feel for your bathroom.
  • Replacement tub spout with diverter is designed to fit 1/2 in. or 3/4 in. IPS end-threaded stub out nipple (adapter included).
  • Before installing tub spout, be sure to wrap two to four turns of Thread Tape onto threaded end of stub out nipple.
  • Diverter included allowing water to flow upward to the showerhead.
  • Chrome finish. Installs with simple household tools making this suitable for a DIY project.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
  • An internal hex socket drive is also known as an Allen drive..
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

1\x4\ Industrial Pipe, Home TZH 10 Pack Iron Pipe, Heavy Duty Pre-Cut Steel Pipe, Threaded Metal Pipe Nipple for Industrial Vintage Style DIY Project/Furniture/Shelving Decoration (1\x4\

  • Wide Application: Our pipe come in 10 packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our threaded cast iron pipe work great without sacrificing functionality..
  • Without DIY Difficulty: These pipes are threaded, just connect the female threaded pipe fitting to the connector, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH elbow decoration combined with a little creativity can go a long way to update a lavatory without breaking the wall..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our floor flange and we promise that you will not be disappointed..
Check Stock