Reviews Threaded Cable Compression Fitting

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Minimprover 2 Pack Brass 1/2 Inch FIP x 3/8 Inch OD Compression Quarter Turn Straight Water Angle Stop Valve Shut Off

  • ★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead..
  • ★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting..
  • ★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F..
  • ★ Shut-off angle stop valve for faucets and toilets. Brass ball mechanism provides easy for operation..
  • ★ Package include: 2 PCS 1/2" FIP x 3/8" inch OD compression Valve. Comes with 1 year warranty..
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Pysrych 304 Stainless Steel Compression Tube Fitting 90 Degree Elbow 1/4 OD x 1/4 OD Pack of 2

  • 90-degree elbow for connecting tubing to threaded pipe at an angle..
  • Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation..
  • Temperature Range: -50-450℃ / -58℉ -842℉..
Check Stock

Nextech DFS1000 (1000N/220lbf/100kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures

  • Made in Thailand. Power adapter/charger input 100-240 volts AC..
  • Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
  • 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
  • M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
  • Re-calibration feature with password protection Load cell condition and overload counter's display page.
  • Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
  • Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
  • Factory's calibration certificate included.
Check Stock

Nextech DFS100 (100N/22lbf/10kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures

  • Made in Thailand. Power adapter/charger input 100-240 volts AC..
  • Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
  • 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
  • M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
  • Re-calibration feature with password protection Load cell condition and overload counter's display page.
  • Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
  • Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
  • Factory's calibration certificate included.
Check Stock

Nextech DFS200 (200N/44lbf/20kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures

  • Made in Thailand. Power adapter/charger input 100-240 volts AC..
  • Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode..
  • 500 reading can be recorded on internal memory for later viewing or download. Latest version PC Software 'NexGraph' Plot Time vs Force..
  • M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32"(M5) & 4x M3 mountable threaded holes..
  • Re-calibration feature with password protection Load cell condition and overload counter's display page.
  • Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
  • Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x stainless steel accessories (sharp point, hook & compression plate)..
  • Factory's calibration certificate included.
Check Stock

Hiija RG6 Compression Tool Coax Cable Crimper Kit RG6 RG11 RG59 F81 with 20PCS F Compression Connectors - BlueYellow

  • Coax Cable Crimper: Made of heavy duty materials, more solid and sturdy.
  • Perfect for Satellite TV, CATV, Home Theater, and Security.
  • Advanced Rotating Head: Quickly and easily alternates for compression of RG-6, RG-11, RG-7, RG-58, RG-59 connectors in one tool.
  • Adjustable Compression Tool: Ensure every fitting is installed perfectly with the adjustable compression feature.
  • Compression Distance: 15.5mm~22.6mm for RG58/59/6, 30.5mm~37.3mm for RG11/7.
  • Warranty & Support - Worry-Free 18-Month Warranty and Toll-Free Tech Support, and friendly customer service.
Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

  • STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
  • SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
  • LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
  • SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
  • APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock

40 Pieces T316 Beveled Washer Angle Washer Stainless Steel Stainless 1/4 Inch 30 Degree Washer for 1/8 Inch to 3/16 Inch Cable Railing Wood Metal Aluminum Posts DIY Balustrade

  • Main function: these stainless steel angled beveled washers are designed for termination on end posts that have angled, or off set holes on stair railings, which can be screwed with threaded end terminals, suitable for short and long stud terminals, and even for tuner terminals.
  • Size information: the 30 degree angle beveled washer comes in 1/4 inch in inner diameter and 5/8 inch in outer diameter, that suits for 1/8 inch and 3/16 inch staircase deck cable railing.
  • Applicable to 1/8 inch stainless steel cable and threaded terminal stud end fitting.
  • Reliable material: made of T316 marine grade stainless steel for maximum durability, our angled beveled washers with high tensile strength and strong resistance to rust and corrosion, can serve you for quite a long time.
  • Applicable occasions: these reliable stainless steel angled beveled washers are practical and versatile for your own cable railing project and big scale indoor and outdoor applications, ideal for the the angle of garden, aluminum post of decking or stairs and aisle railing kit.
  • Package included: you will receive 40 pieces 1/4 inch 30 degree angled beveled washers at once, enough quantity with fine workmanship that will satisfy your indoor or outdoor applications, practical for wood, steel, alum....
Check Stock

RAINPAL RBL022P Premium Rain Barrel Linking Kit(Two Brass Bulkhead Fittings and One 2 FT 3/4' I.D. Hose)

  • Heavy Duty Bulkhead Fitting with Extra Thick and Flexible Hose..
  • Brass Bulkhead Fitting Male 3/4" NH Garden Hose Threaded and Female 1/2" NPT Threaded, Large 36 mm Flange.
  • 2 Ft 3/4" I.D. Hose with Female Garden Hose Threaded Connector.
  • Need 27 mm or 1-1/16 inch Hole to Install.
  • Designed for Irrigation with Rain Barrel. Compare Design, Weight, Quality and Choose RAINPAL.
Check Stock

R&T Tankless Smart Toilet Touchless Auto Flush 1.28-GPF Battery-Operated One-Piece HET Intelligent Toilet for Bathroom

  • ...ng System】Low water pressure startup technology enable to flush the bowl with direct water supply from the pipe, applicable for residential house with low water pressure..
  • 【Complete Installation Kit】 Comes with everything you need for installation. 2 angle valves available: NPT 1/2" threaded & G15/16" threaded compression fitting. Choose one that suits your current water supply..
  • 【Water-Saving】EPA WaterSense: 1.28 GPF (HET: 4.8L per flush)..
  • 【Item Dimension】Comfortable toilet seat height:17 inches (bowl height 15.35 inches), width: 16.14 inches, length: 27.16 inches. Rough-in Distance ≧12 inches..
  • 【Direct Supply From Manufacturer】 We are global leading manufacturer and supplier of innovative high quality bathroom products. This smart bidet comes with 2 YEARS' warranty for residential application and 1 YEAR warranty for commercial application..
Check Stock