Reviews Threaded Bushings

YUPVM 5Pcs Guitar Accessory Vintage Open Bass Guitar Tuning Keys Pegs Machine Heads Tuners Black 1L4R for 5 Strings Bass Black, 282786A2

  • Enclosed-gear tuners for smaller pegheads, with 7/16"-diameter string posts and threaded hex bushings.
  • Precision 20:1 gear ratio with sealed lubrication, cast housings and metal knobs.
  • Set of 4 tuners, for 2-left/2-right pegheads.
  • Mounting hardware (4 screws, bushings and washers) included.
Check Stock

MMC77 Copper Base Anti-Seize Lubricant Compound 2100°F (8oz)

  • BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
  • Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
  • Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
  • Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
  • Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.
Check Stock

Gotoh 'Stop' Tailpiece, with US 5/16-24 Mounting Studs, Nickel

  • The familiar zinc die-cast bar tailpiece for solidbody guitars.
  • For solidbody guitars, with height-adjustable U.S. (5/16-24) threaded mounting studs and knurled bushings.
  • Strings can be installed from the front or rear.
Check Stock

Inner Lens for Clemco Apollo 600 Helmet, 5 Lenses per Pack

  • Ideal to use with PKMSTS2 mandrel saver #2MT.
  • Does not include drill bit, indented shaft end, or knurled nut.
Check Stock

Gotoh 'Stop' Tailpiece, with Metric M8 x 1.25 Mounting Studs, Nickel

  • The familiar zinc die-cast bar tailpiece for solidbody guitars.
  • For solidbody guitars, with height-adjustable metric (M8 x 1.25) threaded mounting studs and knurled bushings.
  • Strings can be installed from the front or rear.
Check Stock

Woodturning Project Kit for 2-1/2 Miniature Pizza Cutter Chrome

  • Create yourself using your lathe, bushings, and a blank of your own choosing (Sold Separately).
  • 2-1/2" stainless steel blade - Threaded insert included for easy handle removal.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Gotoh Tune-o-matic Bridge with Studs/Bushings Chrome

  • A modern version of the Tune-o-matic bridge for solidbody guitar.
  • The metal saddles have helpful starter grooves to guide your slotting files.
  • Intonation screws are retained by mini hex nuts.
  • Includes threaded thumbwheel studs and bushings.
  • String spread is 2-1/16", and post spacing is 2-29/32".
Check Stock

Samick Sage and Sage 2 Spyder Hunting Kit Right Hand Black Quiver

  • BOW NOT INCLUDED: Kit will mount on any recurve bow that has threaded bushings for Sight and Rest.
  • Arrow Rest: AAE capture rest provides excellent arrow flight, Cage Ring removeable.
  • Quiver: 5 arrow quick detach double grip design.
  • SouthWest Archery TigerShark shown is sold separately..
Check Stock

Gold Tip GT Series HD Pin Nocks (Pack of 12), Flo Green

  • Recommended for bows shooting over 280 FPS.
  • Gold Tip's threaded inserts are precisely machined from only top-grade materials.
  • Quality controlled to industry-leading specification tolerances.
Check Stock

OTC 6542 Bearing Cup Remover

  • OTC's 6542 Bearing Cup Remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.
  • Tapered metal cone holds the jaws securely in place during pulling.
  • Perfect for pulling internal bearing cups, seals, bushings, etc..
  • Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches.
  • use with any 5/8-18 threaded slide hammer such as OTC's No. 1155 or 1156 as well as OTC's No. 927 Push-Puller.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Tiger Tool Pin and Bushing Starter Kit Without Hydraulic Cylinder for Commercial Trucks, for use with Class 6-8 Transportation Trucks and Equipment, 15099

  • This Starter Kit allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings - all while the suspension remains on the vehicle. Please Note: The 15099 does not include any necessary Adapters required to operate, all adapters are sold separately..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • There is no need to handle or remove heavy suspension assemblies. The removal of the spring packs from the axle is no longer required and this kit has 20 tons of pulling power for efficient pin removal and installation..
  • The 15099 Pin & Bushing Starter Kit, with one or more adapters, eliminates time-consuming, labor-intensive and costly processes.
  • technicians are no longer required to remove the suspension, haul it to the shop press or reassemble it to the vehicle. This system reduces shop time by as much as 70%! With more than 20 different adapter kits to choose from, and new ones being developed all the time, there sim....
Check Stock

PSI Woodworking PENPAL Portable 15-Pound Mini Penmaking Lathe

  • 1/5hp 110V variable speed motor (0-4300 rpm).
  • Tailstock uses #1 Morse Taper mount (1MT).
  • Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces.
  • Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, (5) 7mm bushings, 7mm drill bit, (2) collet wrenches.
  • Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket.
Check Stock

Southwest Archery SWA 62 Tigershark PRO Takedown Recurve Riser Left Hand LH

  • The Southwest Archery Tigershark PRO Riser is handcrafted from naturally sourced woods such as tiger wood, white oak, dymond wood, as well as SWA's....
  • Offering a unique pocketless design providing a more streamline look and fully equipped with threaded bushings for various attachments such as a....
  • Compatible with Southwest Archery 62" Tigershark PRO limbs..
  • Includes riser ONLY (complete bow sold separately).
  • WARRANTY: Register online for an industry leading one year manufacturer warranty!.
Check Stock