Reviews Threaded Barb Fittings

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

  • Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
  • -6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
  • The barb can use in 3/8" inner diameter fuel hose..
  • Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
  • Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe

  • Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
  • Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
  • Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
  • Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..
Check Stock

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

  • Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
  • Hose barb on one end and male NPT threads on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

  • 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
  • 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
  • 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
  • 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

  • 【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
  • 【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
  • 【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
  • 【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
  • 【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).
Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

  • FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

  • FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

  • 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
Check Stock

TL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits 3/16 1/4 5/16 3/8 1/2 5/8 Barbed x Barbed 6pcs

  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C).
  • CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock