Reviews Thread Turning

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

  • ➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
  • ➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
  • ➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
  • ➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
  • ➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Check Stock

How to Thread a Serger

  • Wide Variety of Stitch Patterns: Easily sew both stretchy and knit fabrics with the 2/3/4 thread overlock with chain stitch and cover stitch, 3-thread narrow overlock, and 3-thread rolled hem.
  • Adjustable Stitch Length: Change the length of your stitch according to your project by simply turning the dial located on the exterior right-hand side within the range of 1 to 4mm.
  • Bright LED Light: Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
  • Lay-In Tension Slots: Thread easily and efficiently by following the color-coded thread paths on the tension slot.
  • Presser Foot Pressure Adjustment: Ability to adjust the presser foot pressure according to the type of material being sewn.
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...ivided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click.Control panel set parameters after saving and start can realize reciprocating turning function and turning thread..
Check Stock

uxcell Screw Thread Pitch Cutting Gauge Tool Metric 60 Degree 0.5-7.0mm Stainless Steel

  • Application: The thread measuring gage is applied to measure thread and external thread tooth pitch. A great choice for you.
  • Advantages: The thread pitch gage, through quenching processing, strong hardness, head with a magnetic.
  • Practical: Using rotary switch can be freely adjusted. Bring you a new and different using feeling..
  • Easy to use: Light and delicate, with precise measurements and simple design, which can be widely used. Meet your different needs.
  • High-quality: The thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Its quality is guaranteed.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

ASZLBYM 5/8\ 3/4\ Lathe Tool Threading Insert Turning Tool Holder SER1616H16 SER2020K16 SER2525M16 with Indexable Threading Turning Insert 16ER AG60 Cutting Insert Blade (5/8\ (16 * 16mm))

  • ♥ Package includes ：1pcs SER1616H16 + 10PCS 16ER AG60 + 1PCS T15 wrench.
  • ♥Turning holder : The material of the turning tool holder is 40Cr steel..
  • ♥Turning holder specification : shank(16*16mm,16mm ≈ 0.629inch), Overall length : 100mm ≈3.937nch, Cutting direction: right hand.
  • ♥turning insert : 16ER AG60 threading turning insert material is carbide, AG60 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm, for processing : steel parts.
  • ♥Turning insert coating : Nanostructured TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
Check Stock

Juki MO-114D 2/3/4 Thread Overlock Sewing Machine

  • Wide Variety of Stitch Patterns: Easily sew both stretchy and knit fabrics with the 2/3/4 thread overlock with chain stitch and cover stitch, 3-thread....
  • Adjustable Stitch Length: Change the length of your stitch according to your project by simply turning the dial located on the exterior right-hand....
  • Bright LED Light: Brightens the needle entry area. The LED light will not heat up even during long hours of operation.
  • Lay-In Tension Slots: Thread easily and efficiently by following the color-coded thread paths on the tension slot.
  • Presser Foot Pressure Adjustment: Ability to adjust the presser foot pressure according to the type of material being sewn.
Check Stock

British Whitworth BSW & Metric Screws Bolts Pitch Measure Thread Gauge 51 Blades Gages

  • ITEM NAME-29 Degrees ACME Screw Pitch Gauge 16pcs set, measuring range: 1-12in.
  • GOOD FUNCTION- Screw Pitch Gauge Accurately measures T-Thread with thread blades of varied size.
  • Used for checking tool angle while cutting threads in metal turning lathes.
  • HIGH QUALITY MATERIAL-The Screw Thread Pitch gage is made of stainless steel, through quenching processing, strong hardness ,elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • EASY TO USE- Each thread blade has a distinct saw-tooth shape and laser-engraved numbers on each piece for easy measurement and reading.
  • EASY TO CARRY- Folding design the Screw Pitch gage, when not in use each thread blade can be recovered, folded compact size, increased portability.
Check Stock

【The Best Deal】OriGlam Screw Thread Pitch Cutting Gauge Tool Stainless Steel Metric Screw Pitc

  • √ Screw thread pitch cutting gauge tool set..
  • √ Size: Metric (mm) - 60° Whitworth - 55°.
  • √ Typically used to check the thread size determination is correct..
  • √ It is most useful for checking tool angle while cutting threads in metal turning lathes..
  • √ The angles on the thread cutting tool is checked on the V slots in the gauge..
Check Stock

Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible

  • SAFE AND SECURE: Anti-release spindle lock (reversible).
  • Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications.
  • MINIMIZES LOAD: Small size (85-milimeter/3.35-inch) and weight minimizes load on small spindles and bearings.
  • FAST OPERATING ACTION: Ideal for production turning of smaller pieces.
  • ADVANCED FEATURES: Automatic jaw safety stop, copper impregnated jaw slides, and direct thread 1-inch x 8TPI dual thread.
  • SPECIFICATIONS: Up to 350-millimeter/14-inch diameter bowls (using 50-millimeter jaws).
  • Up to 150-millimeter/6-inch length spigots (using 50-millimeter jaws).
  • Takes the same accessory range as all other NOVA chucks.
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

52Pcs Stainless Steel Thread Measuring Gage, Precise Screw Thread Measuring Gage Pitch Measuring Tool 60 Degree (Metric& Imperial)

  • [Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience.
  • [Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes.
  • [Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23".
  • [Best Checking Angle Tool]: Stainless steel thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Applied to measure thread and external thread tooth pitch, a great measuring tool for your working.
  • [Premium Stainless Steel Material]: Made of premium stainless steel material, this measuring gage is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Check Stock

Houseuse 4\ Diameter Round Iron Hand Wheel Handwheel for Milling Machine Lathe

  • Modern-design Hand Wheel, polished rim. Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • Design with revolving handle, hand wheel has threaded hole for easy handle assembly..
  • These Hand Wheels are bored to the shaft diameter for their size, and are also tapped for a Removable Handle..
  • Handwheel is good for any application where general or precise adjustments need to be made a turning mechanism..
  • Handle Size: 62 x 22 / 2.44" x 0.87"(L*Max.D ).
  • Fixing Thread Hole Size: M6 ( Fixing screws are not included here.).
Check Stock