Reviews Thread Storage Towers

Chris.W Solid Brass Bulkhead Fitting 3 Sets 3/4 Female 1 Male Solid Brass Water Tank Connector Theaded with Rubber Rings

  • Size: 3/4" female thread x 1" male thread suitable for all barrels / containers with a wall thickness of up to 14 mm.
  • Male thread brass quick connector,female thread inside.Embeded gasket provides strong seal without slipping..
  • Using thread linking to make connection more firmly. Not easy to leak with 2 Rubber Ring, double sided protection.
  • It can be used in water towers, water inlet and outlet, and self-made water storage barrels, which can be used for various pipes, faucets, hoses, fittings, etc..
  • Heavy-duty brass construction with rust proof, Easy to connect. More reliable than aluminum or plastic materials..
Check Stock

Hooshing Brass Bulkhead Fitting 1-1/2 Female 2 Male Water Tank Connector Theaded with Rubber Ring

  • 【Size】1-1/2" female thread 2" male thread. The fitting's OD is approx 2-32/64"/60mm. The thread is NPS, have no tapered. It's straight thread..
  • 【Quality Material】Made of soild brass,make it strong construction for prolonged service life.Won’t be easily corroded.Lead Free Compliant is not 100% lead free. Contains Less Than 0.25% Lead..
  • 【Easy to install】Using thread linking to make connection more firmly. Come with rubber gasket, provides strong seal without slipping, reliably sealing..
  • 【Widely Applications】Commonly used in water towers, water inlet and outlet and self-made water storage barrels,rain barrels, also can be used for various pipes, faucets, hoses, fittings, etc..
  • 【Note】The thread size on the title is not the fitting's OD,please check the size you need before ordering.Due to manual measurement, please allow a deviation of 1 - 2mm..
Check Stock

Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting

  • Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
  • Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
  • Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
  • Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
  • Bulkhead OD 25mm, suitable for about 25mm ID hole..
Check Stock

GOVALVE Brass Bulkhead Fitting - 3/4” NPT Female x 1” Straight Male Thread Water Tank Connector with 2 Rubber Rings for Water Tower Tank Barrels

  • 3/4" NPT Female thread. 1" Straight Male thread.Thread is smooth without burr..
  • Made of brass. Not easy to corrode. Even if used for a long time, it will not rust..
  • Threaded connection. Provide tighter connection. Easy installation without complex tools. Can be connected with faucet and other pipe fittings..
  • Rubber gaskets. Double sided protection, more stable connection and better sealing effect..
  • Widely used: commonly used in water tanks, towers, water storage barrels, rain buckets..
Check Stock

Bulkhead Fitting, 3/8\ Female 1/2\ Male Brass Water Tanks Connector with 2 Rubber Ring for Rain Barrels

  • Commonly used in water towers, water inlet and outlet and self-made water storage barrels, which can be used for various pipes, faucets, hoses, fittings, etc..
  • Made with high quality brass. Durable, the internal and external thread are smooth. Easy to use. Note: These connectors contain lead, not for potable water..
  • Comes with 2 gaskets, embeded gasket provides strong seal without slipping..
  • Using thread linking to make connection more firmly..
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

Intertap D1210 Forward Sealing Beer Faucet (Stainless Steel),Small

  • An all stainless steel faucet that has forward sealing technology (similar to per lick).
  • Compatible with all standard shanks and towers.
  • Modular threaded spout allows you to use this tap as a growler filler, or for dispensing stout, all as easy as threading in a different tip (sold separately).
  • Lever thread is 3/8″ – 16 unc, body thread is 1 1/8″ – 18 thread (north American beer industry standard).
Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

  • 【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
  • 【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
  • 【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
  • 【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..
Check Stock

Lonwin Adjustable Trailer Ladder Rack Fit for Enclosed Trailer Exterior Side Wall - Carry 2 Ladders

  • Side mount ladder racks allow you to carry 2 ladders pipe, conduit or other similarly shaped gear on the exterior side wall of your enclosed trailer..
  • Trailer ladder racks are constructed of sturdy steel with gray powder coat finish resists rust. Adjustable brackets can be installed at varying heights on the tower, also staggered installation..
  • Trailer side ladder rack also have a welded-in gusset which provides extra strength and a place to thread a lock and chain to deter ladder theft (ladder, lock and chain are not included)..
  • Pre-drilled towers can install on your enclosed and open trailers easily and quickly..
  • Package include: 2 towers, 4 Brackets, 8 bungee cords and mounting hardware..
Check Stock

uxcell Plug Fittings, G2 Thread, Flanged Adaptors Sealing Plugs with Gasket, for Water Tanks, Aquariums, Ponds, Pools, PVC, Black

  • [Size] - Overall Size: 71.5x23mm / 2.82x0.91 Inch (DxH).
  • Silicone Gasket Size: 58.5x70x4mm / 2.3x2.76x0.16 Inch (IDxODxT).
  • Male Thread Diameter(Approx): 59.6mm / 2.35 Inch (G2 Thread).
  • [Material] - Made of PVC, has good corrosion resistance..
  • [Easy to Install] - Provides easy and quick installation with no special tools required..
  • [Silicone Gasket] - The embedded silicone gasket provides a strong seal without slipping..
  • [Application] - Widely used in water towers, water tanks, aquariums, ponds, and pools, etc..
Check Stock

Nitrogen Draft Beer Faucet - Steel Keg Faucet and Plastic Keg Tap Handle for Stout Beer and Nitro Coffee

  • [Achieve a Smoother and Creamier Flavor] Create a beautiful cascading effect and a smooth, rich body with the G. Francis Nitrogen Draft Beer Spout and....
  • [Narrow Stout Faucet for the Perfect Pour] Restriction plate and narrow faucet spout ensure a slower, smoother pour to intentionally agitate the beer....
  • [Works with Standard Shanks and Beers Towers] 7-inch (17.8cm) beer tap spout keg faucet has a 1-1/8 inch - 18 thread to fit your beer towers and taps.
  • [Stainless Steel Construction] Unlike brass and chrome-plated beer faucets, these stainless steel keg spouts are safe as they resist wear from acidic....
  • [Package Contents] Each kegerator parts nitrogen tap system includes a stainless steel creamer faucet draft beer dispenser and a 2 by 1.3-inch (5 x....
Check Stock

uxcell Plug Fittings, G2 Thread, Flanged Adaptors Sealing Plugs with Gasket, for Water Tanks, Aquariums, Ponds, Pools, PVC, Black, Pack of 2

  • [Size] - Overall Size: 71.5x23mm / 2.82x0.91 Inch (DxH).
  • Silicone Gasket Size: 58.5x70x4mm / 2.3x2.76x0.16 Inch (IDxODxT).
  • Male Thread Diameter(Approx): 59.6mm / 2.35 Inch (G2 Thread).
  • [Material] - Made of PVC, has good corrosion resistance..
  • [Easy to Install] - Provides easy and quick installation with no special tools required..
  • [Silicone Gasket] - The embedded silicone gasket provides a strong seal without slipping..
  • [Application] - Widely used in water towers, water tanks, aquariums, ponds, and pools, etc..
Check Stock

uxcell Plug Fittings, G3/4 Thread, Flanged Adaptors Sealing Plugs with Gasket, for Water Tanks, Aquariums, Ponds, Pools, PVC, Black, Pack of 2

  • [Size] - Overall Size: 42x23mm / 1.65x0.91 Inch (DxH).
  • Silicone Gasket Size: 26x34x4mm / 1.02x1.34x0.16 Inch (IDxODxT).
  • Male Thread Diameter(Approx): 25.7mm / 1.01 Inch (G3/4 Thread).
  • [Material] - Made of PVC, has good corrosion resistance..
  • [Easy to Install] - Provides easy and quick installation with no special tools required..
  • [Silicone Gasket] - The embedded silicone gasket provides a strong seal without slipping..
  • [Application] - Widely used in water towers, water tanks, aquariums, ponds, and pools, etc..
Check Stock

uxcell Plug Fittings, G1-1/2 Thread, Flanged Adaptors Sealing Plugs with Gasket, for Water Tanks, Aquariums, Ponds, Pools, PVC, Black, Pack of 2

  • [Size] - Overall Size: 63.5x23mm / 2.5x0.91 Inch (DxH).
  • Silicone Gasket Size: 47x59x4mm / 1.85x2.32x0.16 Inch (IDxODxT).
  • Male Thread Diameter(Approx): 47.8mm / 1.88 Inch (G1-1/2 Thread).
  • [Material] - Made of PVC, has good corrosion resistance..
  • [Easy to Install] - Provides easy and quick installation with no special tools required..
  • [Silicone Gasket] - The embedded silicone gasket provides a strong seal without slipping..
  • [Application] - Widely used in water towers, water tanks, aquariums, ponds, and pools, etc..
Check Stock