Reviews Thread Bit

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Core Drill Adapter 5/8 Threaded Arbor Diamond Hole Saw 5/8 inch - 11 to 1/2 Shank Sanding Attachment Arbor Shaft Adaptor Heavy Duty

  • HEAVY DUTY Core Drill Adapter for 5/8-11 thread to straight 1/2 inch shank..
  • Core Bit Adapter converts 5/8" - 11 Thread to 1/2 inch Straight Shank.
  • Heavy Duty - Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond cup grinding wheel, grinding stone for drill and Back Holders are 5/8 inch - 11 threaded adapter for core bits.
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects to 5/8" 11 Female Threaded Tools, Core Bits, Hole Saws - Makes them a 1/2 inch Shank as a drill shank adapter.
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now you can use sanding, cutting and polisher tools with standard chuck shank with our adapter for core bits.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

Dophee 8Pcs Socket Adapter Impact Hex Shank Drill Bits Power Extension Bar Set 1/4\ 3/8\ 1/2\ Bits

  • 6" extension threads into 9" chucking extension for 15" length.
  • Drill bit extension set has male and female thread size of 1/4-28.
  • Drill extension set is black oxided to prevent corrosion and enhance appearance.
Check Stock

AMD YD299XAZAFWOF Ryzen Threadripper 2990WX Processor

  • World’s First 32 core, 64 thread Desktop Processor.
  • 4.2 GHz Max Boost , Max Temperature 68 degree Celsius.
  • OS Support: Windows 10 64 Bit Edition, RHEL x86 64 Bit, Ubuntu x86 64 Bit.
Check Stock

M12 x 1.25 Thread Tap with 10.8mm Drill Bit RH Right Hand M12 x 1.25mm Tap HSS M12x1.25 Metric Thread Milling Tap

  • Package included:1pc HSS right hand thread tap M12x1.25 and 1pc Drill bit 10.8mm..
  • My Note: During use, apply machine covers and wear safety glasses when using taps for cutting threads. Do not use excessive force or load as it may cause the tap break ..
  • Model / Size: M12 x 1.25 tap RH with Drill bit size 10.8mm..
  • Thread Type: Right Hand Thread M12x1.25 Tap RH.
  • My Note: All Products are testde rigorously. High speed steel offers precision cut threads, accurately formed for consistent, exact threading tool..
Check Stock

3/8" Diamond Radius Bullnose granite countertop Shaping router bit 4" Diamond Resin Dry Polishing Pad sanding disc grinding cup wheel 8+1 stone concrete floor surface repair terrazzo sander

  • The router bit and pad holder is 5/8"-11 Thread. NOT M14 Thread. VERY IMPORTANT REMIND: Velcro Backer's max capacity is 5000 RPM. Please don't use it with high speed grinder/polisher..
  • (a) 1 Piece of B10 (10 mm / 3/8") Roundover / Radius / Demi / Half Bullnose Diamond Brazed Router Bit/Profile for 10 MM High or Thick stone concrete (5/8"-11 Thread arbor)..
  • (b) 1 Piece of 4 Inch / 100 mm Diamond Turbo Grinding cup wheel for stone concrete surface grinding (it is vecro backed, using with the pad holder)..
  • (c) 7 Pieces of 4" / 4 Inch / 100 mm Diamond PREMIUM GRADE DRY Polishing Pad for granite marble concrete: 1 X Grit 50 100 200 400 800 1500 3000. And 1 Piece of 4" / 4 Inch / 100 mm Velcro Backer/Pad Holder (5/8"-11 Thread arbor)..
  • -ideal speed of grinder/polisher: 3500-4500 RPM. - please don't use with high speed grinder/polisher..
Check Stock

2 Pack Screw Pitch Cutting Gauge, 51 Pcs America SAE Type Screw Thread Pitch Gauge and 58 Pcs Metric&Inch &America SAE Type Caliper Gages Measuring Tool

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

Spax – Universal Screw 3/blank Galvanised Partially Threaded, Countersunk T-Star plus 4Cut, A2J – 0191010350303, 191010400303

  • Usage: Universal indoor or outdoor without direct exposure to weather elements. Exclusive WIROX coating from SPAX聽: Corrosion resistance 20 times stronger than standard white galvanized coating.
  • MULTI head: Easy penetration and simplified screwing. Mills in wood and stops on metal. Optimal power transmission and better fit on the T20 bit, even with overhead work, thanks to the T-STAR plus guide pin.
  • Power and battery saving: no need for pre-drilling (depends on wood). Easy screwing. Reduction of wood splitting with four-sided 4CUT tip. Typical SPAX corrugated profile for easier separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Countersunk head, Partial thread, 4CUT point, WIROX coating, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Length of partial thread (LgT) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Heavy Wood Drill Bit Firewood Splitter U Anti-Skid Thread U Screw Splitting Cone Screw Cone Driver Fire Wood Log Splitter Hex Shank Handle,Make Sure Wood is Dry, It Binds in Wet Wood(Max Dia 32 mm)

  • 1,Different types of drill bits are available for different electric drills, all kinds of soft and hard wood can be opened.
  • 2,The thread is very deep, the deeper the head thread is, the faster the firewood is..
  • 3,U-shaped anti-skid thread high-frequency quenching continuous tip heat treatment of the drill bit, our drill bit uses high-frequency quenching heat treatment, which not only ensures the hardness of the drill bit, but also ensures the durability..
  • 4,The wood splitting drill is not efficient for splitting all wood. If it is large or hard wood, it should be separated from the edge of the wood, and the wood should be split little by little several times..
  • 5,Good after-sales service, if you have any questions or suggestions about our products or services, I hope you can communicate with us as soon as possible, our professional customer service will solve the problem for you in detail..
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock