Reviews Thickness Measurements

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 30 Gallon & 46 Gallon | RV Water Holding Tanks

  • Combo Pack (ONE) 30 Gallon & (ONE) 46 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials -....
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank,....
  • 30 and 46 GALLON EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor....
  • 30 GALLON TANK MEASUREMENTS 34.5” x 12” x 17.5” -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/-....
  • 46 GALLON TANK MEASUREMENTS 42” x 14” x 18” -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/-....
Check Stock

Fowler 54-554-730-0 Xtra-Value Digital Internal/External Caliper Gage Set

  • LCD Display: High-quality thickness caliper with a steel body.
  • easy-to-read LCD display allows you to get precise results quickly and easily.
  • Measuring Capabilities: This digital caliper measures Inside dimensions for hole diameters and groove depths.
  • Accurate Measurements: The caliper measuring tool has an accuracy of 0.01" and a reading of 0.01".
  • perfect for machinists and household/DIY measurements.
  • Three-Unit Conversion: Quickly switch between inch, fraction, or metric units with a single click.
  • allows you to set zero for taking intermediate or differential measurements.
  • hold feature freezes display for later viewing.
  • Set Includes: Xtra-Value electronic caliper gage, CR2032 battery, manual, and a plastic case.
Check Stock

Testex Burnishing Tool, 5/Pack

  • Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Check Stock

Fowler 54-554-630-0 Xtra-Value Digital External Caliper Gage with 0 -6 /150mm Measuring Range

  • LCD Display: High-quality thickness caliper with a steel body.
  • easy-to-read LCD display allows you to get precise results quickly and easily.
  • Measuring Capabilities: This digital caliper measures outside diameters, steps and tube thicknesses.
  • Accurate Measurements: The caliper measuring tool has an accuracy of 0.01" and a reading of 0.01".
  • perfect for shop and household/DIY measurements.
  • Inch-Metric conversion: Quickly switch between inch or metric units with a single click.
  • allows you to set zero for intermediate or differential measurements.
  • hold feature freezes display for later viewing.
  • Set Includes: Xtra-Value electronic caliper, 2 CR2032 batteries, manual and a plastic case.
Check Stock

Continuous Sweep Mini Quartz Movement - Medium Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 20.6 mm (13/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 7.9 mm (5/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 9.5 mm (3/8 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 9.5 mm (3/8 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand....
Check Stock

Aexit M4 6H Calipers Double End Hex Handle Go/No Go Thread Gage Gauge Caliper Gages Measuring Tool

  • LCD Display: High-quality thickness caliper with a steel body.
  • easy-to-read LCD display allows you to get precise results quickly and easily.
  • Measuring Capabilities: This digital caliper measures Inside dimensions for hole diameters and groove depths.
  • Accurate Measurements: The caliper measuring tool has an accuracy of 0.01" and a reading of 0.01".
  • perfect for machinists and household/DIY measurements.
  • Three-Unit Conversion: Quickly switch between inch, fraction, or metric units with a single click.
  • allows you to set zero for taking intermediate or differential measurements.
  • hold feature freezes display for later viewing.
  • Set Includes: Xtra-Value electronic caliper gage, CR2032 battery, manual, and a plastic case.
Check Stock

Mxmoonfree Digital Thickness Gauge 0.001mm/0.00005 | 0-12.7mm/0.5 Electronic Micrometer Thickness Meter with LCD Display Unit Conversion Storage Case Extra Battery

  • [High Resolution] - Measuring range: 0-12.7mm/0.5" | Resolution: 0.001mm/0.00005".
  • The paper thickness gauge is accurate to 1μm which is perfect for....
  • [Inch/Metric Conversion] - One button push conveniently allows the leather thickness gauge to switch measurements between mm and inches, and the unit....
  • [Easy To Operate] - Solid die cast and painted metal grip handle with thumb trigger make the thickness gauge tool easy to operate and hold. Uses a....
  • [With Storage Box] - The sheet metal thickness gauge comes with a well fitted padded hard case for daily storage. The contact plates are finely....
  • [Application] - The digital micrometer caliper is equipped with a large LCD display, which is used to accurately measure the thickness of materials,....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

Clear Poly Bags 6x9\

  • CLEAR POLY BAGS: Choose from our large range of size options and combo packs to fit all of your packaging needs. Polybags are transparent and self-sealing. Made of very strong 1.5mil thick (38 micron) polypropylene plastic (PP) that provides an extra clear, crisp look..
  • STRONG SELF-ADHESIVE SEAL: Choose between resealable or permanent (extra strong) glue. The resealable poly bags allow for reopening and reusing, while the permanent seal is the ultimate in protection and can't be opened without ripping or cutting the bag..
  • NOTE REGARDING SIZE MEASUREMENTS: The thickness of your product determines the size you require. To determine width: Add the Width of product + Thickness of product + ½ inch. To determine length: Add the Length of product + Thickness of product + 1 inch..
  • VIEW OUR ENTIRE RANGE: You can view our entire range of packaging and shipping products at the Retail Supply Co Amazon Store by clicking on "Visit the Retail Supply Co Store" at the top of this listing..
Check Stock

Clear Poly Bags 6x9\

  • CLEAR POLY BAGS: Choose from our large range of size options and combo packs to fit all of your packaging needs. Polybags are transparent and self-sealing. Made of very strong 1.5mil thick (38 micron) polypropylene plastic (PP) that provides an extra clear, crisp look..
  • STRONG SELF-ADHESIVE SEAL: Choose between resealable or permanent (extra strong) glue. The resealable poly bags allow for reopening and reusing, while the permanent seal is the ultimate in protection and can't be opened without ripping or cutting the bag..
  • NOTE REGARDING SIZE MEASUREMENTS: The thickness of your product determines the size you require. To determine width: Add the Width of product + Thickness of product + ½ inch. To determine length: Add the Length of product + Thickness of product + 1 inch..
  • VIEW OUR ENTIRE RANGE: You can view our entire range of packaging and shipping products at the Retail Supply Co Amazon Store by clicking on "Visit the Retail Supply Co Store" at the top of this listing..
Check Stock

Love's Kitchen

  • COMPLETE SET - Comes with an 11.5 x 12" 3-ring binder, 50 clear letter sized protector sheets, and 12 divider pages featuring printed tabs of the most popular recipe categories..
  • COMPLEMENTING THEME - The binder and divider tabs feature complementary designs.
  • SMART DESIGN - The binder has stain-resistant padded covers and a 2.5" D-shaped ring which allows the binder to stay flat when opened.
  • extra-durable protector sheets feature secure inward opening and have heat-welded seams and double thickness in hole-punched margin.
  • DURABLE - 2.5" D-rings provide high capacity.
  • Secured protectors sheets and divider tabs are wrapped separately for protection and fun and easy set-up..
  • COOKING TIPS & MEASUREMENTS - Inside front and back covers feature an EQUIVALENT MEASUREMENTS list including standard to metric conversions and EMERGENCY SUBSTITUTE INGREDIENTS list..
Check Stock

Press-O-Film Coarse Minus Grade (0.5-1.0 mils / 12-25 microns) Replica Tape, Roll

  • Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Check Stock