Reviews Thermaltake Smart White Series Power Supply 500ws

COMeap 6 Pin to 3X 15 Pin SATA Hard Drive Power Adapter Cable for Some Types of Thermaltake Modular PSUs 20-in(50cm)

  • 『Compatibility』Compatible with Thermaltake modular PSUs including: Toughpower DPS G series, Toughpower Grand RGB series, Toughpower Grand Series, Toughpower DPS G RGB Gold Series, Toughpower iRGB PLUS 1250W Titanium, Toughpower DPS G RGB Titanium Series, Toughpower DPS G Platinum series, Smart Pro RGB, Semi-modular: Toughpower Grand Series, Toughpower DPS G XT series, Toghpower series, EVD Ble 2.0 series, Smart series, Smart SE series.
  • 『Note』This cable was only designed for some types of Thermaltake PSUs listed in the 1st point, not compatible with other brand PSUs or types. If you use other incompatible brand PSUs or types, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure if it supports your power supply.
  • 『6P - 15P SATA』6 pin port to plug into Thermaltake PSUs, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port.
  • 『Connector』Connector A: 6 pin male(only for some types of Thermaltake PSUs as listed), Connector B: 3x SATA 15 pin female.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+seco....
Check Stock

ALITOVE WS2812B WS2811 Addressable LED Bluetooth Controller iOS Android App Wireless Remote Control DC 5V~12V for SK6812 SK6812-RGBW WS2812 SM16703 Dream Color Programmable RGB LED Strip Pixel

  • ... types, R/G/B sequence and pixels number, control up to 1024 pixels in total. Save user setting when power off. DC 5V~12V wide working voltage.
  • 【Warnings】The controller can’t regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V power supply. Otherwise, your lighes will be damaged..
Check Stock

BTF-LIGHTING WS2812B WS2811 2.4G WiFi Music SP511E SPI Controller Google Home/Alexa Timer Mode with Dual Signal Output 900pixels/port for LED Module Pixel Strip Light APP/3Key Button/IR Remote Control

  • ...controller control 900 pixels/port max . The APP is Fairy Nest. This controller only support 2.4G WiFi network.Can't support 5.0G WiFi network. Only support 2.4GHz WiFi.If the WiFi is 2.4G/5.0G, please set the router to be divided into two WiFi, one is 5.0GHz and the other is 2.4GHz.
  • DC5V LED strip,Must use 5V power supply.For example LED strip is DC5V WS2812B , you must use DC5V power supply . The voltage depends on LED strips. Don't use DC12V power supply for DC5V WS2812B pixel strip..
  • Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green You can use the APP to calibrate the colors to make them consistent..
  • Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the WiFi is disconnected . Please note : When you Light up 1 colorred or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED .If you don't know which power supply can be used for your LED project, you can email us..
  • It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string i....
Check Stock

PCI-e 8 Pin Male to Dual 8 Pin 6+2 Male PCI Express Power Adapter Cable for EVGA Modular Power Supply Cable for Graphics Video Card 8 pin Splitter 25+10 inches TeamProfitcom

  • Connectors A- 8 Pin GPU male. Connector B - 2x 8-pin (6+2pin) male : Please Note that the two connectors cannot be used alternately.
  • GPU 8 pin male end to connect to the power connector of the power supply and two 8 pin(6+2) male ends to plug into the video graphics card.
  • NOTE: this cable is NOT compatible with EVGA (1000PS, 850GS, 1050GS) ,Thermaltake smart series ,Seasonic and Corsair power supply.
  • Compatible with 6-pin & 8-pin graphics cards from popular manufacturers from ASUS,ASRock,Radeon,Sapphire,EVGA and Gigabyte. NOTE - The 8 pin (6+2)....
  • Length:(Approx) 25 + 10 inches,Gauge: standard 18AWG - UL1007.
  • ribbon cable.NOTE: This cable is only for the brand and model as listed. In order to....
Check Stock

UpBright AC/DC Adapter Compatible with Samsung SLPS-250FFOT DJ44-00005B DJ44-00005A Powerbot 7000 VR7000 Series R7070 R7090 R7040 R7010 R7065 SR1AM70 SR2AM70 R7260 VR2AR72 Robot Vacuum Battery Charger

  • ...t Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global AC / DC Adapter Compatible with Samsung SLPS-250FFOT SLPS-250FF0T DJ44-00005B DJ44-000058 DJ4400005B DJ44000058 DJ44-00005A DJ4400005A fits Powerbot Power bot 7000 VR7000 Series R7070 R7090 R7040 R7010 R7065 Star Wars Limited Edition – Darth Vader & Stormtrooper Robot Vacuum Robotic Cleaner Vac 24.9V 1A DC24.9V 1000mA 24.9VDC 1.0A Switching Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU ((((( NOTE ! Charging Dock Station - not included ))))).
  • Compatible with the following vacuum models: Samsung Powerbot 7000 VR7000 Series Star Wars Limited Edition – Darth Vader & Stormtrooper Robot Vacuum.
  • Samsung PowerBot R7010 SR1AM70 SR1AM7010UW VR1AM7010UW/AA SR1AM7010U5 VR1AM7010U5 VR1AM7010U5/AA 21.6V 80W Li-ion Robot Vacuum.
  • Compatible with: Samsung POWERbot 7040 R7040 SR1AM7040WG VR1AM7040WG VR1AM7040WG/AA VR1AM7040W9/AA VR1AM7040W9-AA Robot Vacuum.
  • Samsung Powerbot R7065 SR2AM7065WS VR2AM7065WS/AA 21.6 V 130W Li-ion Rechargeable Battery Robot Vacuum Cleaner.
  • Samsung POWERbot SR1AM70**** SR2AM70**** Series SR1AM70 SR2AM70 SLPS-601FCOT Supply Unit 24.6V 2.5A Power Supply Cord Charger.
Check Stock

UpBright 9V AC/DC Adapter Compatible with Whistler WS1040 WS1025 WS1010 WS1010W WS1010WA WS 1040 1025 1010 Radio Scanner GA-09D-0310B GQ05-090040-AU GQ06-090040-AU 9VDC 400mA 12V Power Supply Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 Days Refund. 24 Months Exchange..
  • UpBright New Global 9V AC / DC Adapter Compatible with Whistler WS1040 WS1025 WS1010 WS 1040 WS 1025 WS 1010 Digital Trunking Handheld Radio Scanner Model: GQ05-090040-AU GQ05-090040AU 9VDC - 12VDC 400mA DC9V - DC12V 0.4A - 1A 9.0V - 12.0V 9 VDC 9.0 V Switching Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with: Whistler WS1010 WS1010W WS1010WA 200 Channels / 400 Channel VHF/AIR/UHF Analog Handheld Radio Scanner 6VDC 4 x "AA" Batteries or Adapter 9VDC 400mA or 12V Adapter Power Supply.
  • Compatible with: Whistler WS1025 200-Channel / 300-Channel VHF / AIR / UHF Desktop Analog Radio Scanner with FM Radio Power: 9VDC 400mA Adapter No. GA-09D-0310B Power Supply.
  • Compatible with: Whistler Model: GQ05-090040-AU GQ05-090040AU GQ05090040-AU GQ05090040AU 9VDC 400mA Power Supply.
  • Whistler Model: GQ06-090040-AU GQ06-090040AU GQ06090040-AU GQ06090040AU 9VDC 400mA Power Supply.
Check Stock

LED Driver 200 Watts 24V DC Low Voltage Transformer, Waterproof IP67 LED Power Supply, Adapter with 3-Prong Plug 3.3 Feet Cable for Any 24V DC led Lights, Computer Project, Outdoor Light

  • High quality Switch Power Supply, 100% pure copper core and coil ensure efficient, steady and reliable working. Efficiency up to 85%..
  • Reliable quality, has passed FCC,CE certification..
  • Smart protection: over-voltage protection, overload protection, overheat protection and short-circuit protection..
  • Professional power supply for LED Display Board P2 P3 P4 P5 P6 P7 P10 P12 P20 F5 F3.75 ,WS2812B WS2811 WS2801 APA102 SK6812 SK9822 etc..
  • Widely used in LED display, LED Strip, audio power amplifier, billboard etc.
Check Stock

5pcs LED Breakout Module Board WS2812 RGB 5050 RGB with WS2812S chip Used for 5050 RGB LED

  • 【Introduction】- The breakout board uses WS2812S chip, used for 5050 LED..
  • 【Support】- This WS2812 Breakout Board supports high brightness and RGB color..
  • 【Can Connect a Lot of Lights】- Built in chip, it can connect a lot of lights in series..
  • 【Operation】- After connection in series, each light can control color independently..
  • 【Power Supply】- No matter for how much lights, it only need one control cable and two power cables..
Check Stock

PHEVOS 5V 40A 200w Switching Power Supply, Brass Material Transformer AC 110V to DC 5 Volt for CCTV, Radio, Computer Project, WS2811 2801 WS2812B APA102 SK6812 led Pixel Lights(5V40A

  • High quality Switch Power Supply, 100% pure copper core and coil ensure efficient, steady and reliable working. Efficiency up to 85%..
  • Reliable quality, has passed FCC,CE certification..
  • Smart protection: over-voltage protection, overload protection, overheat protection and short-circuit protection..
  • Professional power supply for LED Display Board P2 P3 P4 P5 P6 P7 P10 P12 P20 F5 F3.75 ,WS2812B WS2811 WS2801 APA102 SK6812 SK9822 etc..
  • Widely used in LED display, LED Strip, audio power amplifier, billboard etc.
Check Stock

BTF-LIGHTING WS2812B WS2811 WS2813 SP107E Music Bluetooth Full Color Controller iOS/Andriod App Control Support Almost All The LED IC Chip Suit for LED Strip,Matrix Panel,Module Buli-in Mic/AUX Input

  • AUX Input and Built-in microphone.The first mode is 3.5mm audio input.It can block out the outside world . The second mode is the built-in mic. It captured the sound of the outside world. The Sensitivity of two modes can be easily adjusted.If your LED light is 5V,please use 5V power supply..
  • Suit For led Strip and LED Matrix Panel .Compatible with many LED driver IC except the no IC chip led strip. It is also suitable for many DIY projects.You can set up number of segments and pixels number of each segment according to the LED pixels array of your lights. This feature is perfect for LED matrix. or other DIY project..
  • 30+18+180 Kinds Of Lighting Effect .There are 30 kinds of music lighting effects for LED matrix panel ,18 kinds of music lighting effects for led strip .180 kinds of non-music lighting effects . Music mode and non-music mode can be arbitrarily changed. It can play lighting effect automatically. Control max 960 IC chips..
  • Supports RGB RGBW IC types and is compatible with almost every kind of one-wire or two-wire LED driver IC , such as WS2812B,WS2811,WS2813,WS2814,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix ..
  • Adjustable . The speed , the brightness ,the number of pi....
Check Stock

UpBright 13.8V AC/DC Adapter Compatible with Whistler WS1095 WS 1095 WS1098 WS1065 WS 1098 WS 1065 TRX-2 TRX2 Desktop Mobile Digital Radio Scanner GA-04D-1100E 14V 600mA Power Supply Battery Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection) Tested Units. In Great Working Condition. UpBright 30 days Refund. 24 Months Exchange..
  • UpBright New Global 13.8V AC/DC Adapter Compatible with Whistler WS1095 WS 1095 WS1098 WS1065 WS 1098 WS 1065 TRX-2 TRX2 Desktop Mobile Digital Scanner DC13.8V 600mA 13.8VDC 0.6A +13.8V 13.8 Volts 13.8 V Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
  • Compatible with Whistler WS1098 WS 1098 Desktop/Mobile Digital Trunking Scanner 14V DC 600mA 14VDC 14V 14.0V Power Supply.
  • Whistler WS1095 WS 1095 WS1065 WS 1065 TRX-2 TRX2 Digital Trunking Desktop/Mobile Radio Scanner Adapter No. GA-04D-1100E GA-04D1100E GA04D-1100E GA04D1100E 13.8V DC 600mA Power Supply.
Check Stock

3ft Boundary Magnetic Markers for Neato Shark Ion Robot Roborock Robotic Vacuums Alternative Accessories Cleaner Bundary Magnetic Marker Strip Tape

  • Compatible with - Neato Botvac Series,Neato Botvac D5,D6,D7,XV.
  • Roborock S5,E2,E20,E35,S50,S55,S51,S52,T6.
  • Roborock S5,E2,E20,E35,S50,S55,S51,S52,T6,Xiaomi Mi Mijia series robot vacuum cleaner.
  • Shark Ion Robot RV720,R75,750,RV850,R85,RV700.
  • POWERbot VR2AK9350WK/AA,VR2AJ9250WW/AA,VR2AM7090WD/AA,VR2AM7070WS/AA,VR2AM7065WS/AA series vacuum cleaner.
  • Effectively prevent your vacuum across the region you don’t need to clean.
  • Easily cut the magnetic strip to fit doorways, around pet bowls, thick carpeted top stairs, or anywhere you don’t want you Neato robot to go, No power supply required, no need to check whether the power supply is normal or sufficient, very safe and convenient.
  • Boundary markers offer the ability to keep your Minibot robot vacuum black away from certain areas of a room,away from an object, or confined to one room.
Check Stock

Full Version USB Hart Modem WS232UP Hart -USB Modem Hart Transmitter with Built-in 24VDC & Loop Resistor for All HART Device

  • The Latest Full Version USB HART MODEM WS232UP, With Built-in 24V DC & Loop Resistor, Windows XP/7/8/10 Support, Suitable For All Devices Which Support HART Protocol, etc..
  • The WS232UP USB-HART Modem provides a complete and flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter. The WS232UP is developed based on BELL202 modem standard, this external interface is rugged and compact and ideal choice for field service, commissioning, engineering, training, table top shows, lunch and learns and demo cases..
  • Fully HART compliant for communication with any HART instrument and error-free slave testing * DC-DC isolation power draws from USB port and needs no external power supply.
  • * Three modes: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω. The mode is easily slide-switch selected so you’ll always have a power supply or loop resistor with you * Easy installation and use, this modem can power all 2-wire HART devices-independent of supplier.
  • * Rugged aluminium alloy case gives you industrial-grade reliability in a small package * Free HART application software for you to configure your HART device * Smart Design, smaller than a normal name card.
Check Stock